D-Link DWR-980 Manual de usuario
Quick Installation Guide
DWR-980
Wireless AC1200 4G LTE Router with VDSL2 Support,
Gi abit Ethernet Ports, and 2 FXS Ports
DWR-980 Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Router DWR-980
•Power adapter DC 12V/2.5A
•Ethernet cab e
•Two detachab e LTE/3G antennas
•RJ-11 te ephone cab e
•“Quick Installation Guide” (brochure).
If any of the items are missing, p ease contact your rese er.
The “User Manual” and “Quick Installation Guide” documents are avai ab e
on D-Link website (see www.d ink.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
2
DWR-980 Quick Installation Guide
Default Settings
Do ain na e of device dlinkrouter.local.
IP address of device 192.168.0.1
Userna e (login) admin
Password admin
Na e of wireless
network (SSID)
2.4GHz DWR-980
5GHz DWR-980-5G
Network key (PSK password)
see WPS PIN on the barcode
abe on the back pane of
the device
!
Router DWR-980 with defau t settings cannot connect to the Internet.
To get started, p ease set your own password for access to the web-
based interface and change the WLAN name (SSID); then, if needed,
configure other settings recommended by your ISP.
3
DWR-980 Quick Installation Guide
System Requirements and Equipment
•A computer with any operating system that supports a web browser.
•A web browser to access the web-based interface of the router:
◦App e Safari 8 and ater
◦Goog e Chrome 48 and ater
◦Microsoft Internet Exp orer 10 and ater
◦Microsoft Edge 20.10240 and ater
◦Mozi a Firefox 44 and ater
◦Opera 35 and ater.
•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
•An 802.11a, b, g, n, or ac Wi-Fi adapter to create a wire ess network.
•Ana og phone.
•An active SIM card (when it is necessary to connect to the Internet via
mobi e operators' networks)1.
1 Contact your operator to get information on the service coverage and fees.
4
DWR-980 Quick Installation Guide
CONNECTING TO PC
PC with Ethernet Adapter
1. Connect an Ethernet cab e between any of LAN ports ocated on the back
pane of the router and the Ethernet port of your PC.
2. To connect via built-in modem: insert a SIM card into the s ot on the eft
side pane of the router with the go d contacts facing towards the front of
the device and gent y push unti it c icks.
!If you need to connect a SIM card or change it to another one when the
router is powered on, power off the router, insert or change the SIM
card, and power on the router.
3. To connect the router to a DSL line: connect a phone cab e between the
phone jack and the DSL port of the router.
4. To connect the router to an Ethernet line: connect an Ethernet cab e
between the WAN port of the router and the Ethernet ine.
5. Connect another phone cab e between an FXS port of the router and the
phone.
6. Connect the power cord to the power connector port on the back pane of
the router, then p ug the power adapter into an e ectrica out et or power
strip.
7. Turn on the router by moving the POW R switch on its back pane to the
ON (I) position.
Then make sure that your PC is configured to obtain an IP address
automatica y (as DHCP c ient).
5
DWR-980 Quick Installation Guide
Obtaining P Address Automatically
(OS Windows 7)
1. C ick the Start button and proceed to the Control Panel window.
2. Se ect the Network and Sharing Center section. (If the Contro Pane
has the category view (the Category va ue is se ected from the View by
drop-down ist in the top right corner of the window), choose the View
network status and tasks ine under the Network and Internet
section.)
3. In the menu ocated on the eft part of the window, se ect the Change
adapter settings ine.
4. In the opened window, right-c ick the re evant Local Area Connection
icon and se ect the Properties ine in the menu disp ayed.
5. In the Local Area Connection Properties window, on the
Networking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)
ine. C ick the Properties button.
6
DWR-980 Quick Installation Guide
6. Make sure that the Obtain an IP address auto atically and Obtain
DNS server address auto atically choices of the radio buttons are
se ected. C ick the OK button.
7. C ick the OK button in the connection properties window.
7
DWR-980 Quick Installation Guide
PC with Wi-Fi Adapter
1. To connect via built-in modem: insert a SIM card into the s ot on the eft
side pane of the router with the go d contacts facing towards the front of
the device and gent y push unti it c icks.
!If you need to connect a SIM card or change it to another one when the
router is powered on, power off the router, insert or change the SIM
card, and power on the router.
2. To connect the router to a DSL line: connect a phone cab e between the
phone jack and the DSL port of the router.
3. To connect the router to an Ethernet line: connect an Ethernet cab e
between the WAN port of the router and the Ethernet ine.
4. Connect another phone cab e between an FXS port of the router and the
phone.
5. Connect the power cord to the power connector port on the back pane of
the router, then p ug the power adapter into an e ectrica out et or power
strip.
6. Turn on the router by moving the POW R switch on its back pane to the
ON (I) position.
7. Make sure that the Wi-Fi adapter of your PC is on. As a ru e, modern
notebooks with bui t-in wire ess NICs are equipped with a button or
switch that turns on/off the wire ess adapter (refer to your PC documents).
If your PC is equipped with a p uggab e wire ess NIC, insta the software
provided with your Wi-Fi adapter.
Then make sure that your Wi-Fi adapter is configured to obtain an IP address
automatica y (as DHCP c ient).
8
DWR-980 Quick Installation Guide
Obtaining P Address Automatically and
Connecting to Wireless Network (OS Windows 7)
1. C ick the Start button and proceed to the Control Panel window.
2. Se ect the Network and Sharing Center section. (If the Contro Pane
has the category view (the Category va ue is se ected from the View by
drop-down ist in the top right corner of the window), choose the View
network status and tasks ine under the Network and Internet
section.)
3. In the menu ocated on the eft part of the window, se ect the Change
adapter settings ine.
4. In the opened window, right-c ick the re evant Wireless Network
Connection icon. Make sure that your Wi-Fi adapter is on, then se ect
the Properties ine in the menu disp ayed.
5. In the Wireless Network Connection Properties window, on the
Networking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)
ine. C ick the Properties button.
9
DWR-980 Quick Installation Guide
6. Make sure that the Obtain an IP address auto atically and Obtain
DNS server address auto atically choices of the radio buttons are
se ected. C ick the OK button.
7. C ick the OK button in the connection properties window.
8. To open the ist of avai ab e wire ess networks, se ect the icon of the
wire ess network connection and c ick the Connect To button or eft-
c ick the network icon in the notification area ocated on the right side of
the taskbar.
10
Otros manuales para DWR-980
2
Tabla de contenidos
Otros manuales de Enrutador de red de D-Link
D-Link
D-Link DFL-900 Manual de usuario
D-Link
D-Link DSL-502T Manual de usuario
D-Link
D-Link DWR-921 Manual de usuario
D-Link
D-Link DIR-859 Manual de usuario
D-Link
D-Link DSL-504 Manual de usuario
D-Link
D-Link xStack DGS-3400 Series Manual de usuario
D-Link
D-Link DIR-827 Manual de usuario
D-Link
D-Link DIR-602L Manual de usuario
D-Link
D-Link DES-1008FX Manual de usuario
D-Link
D-Link Express Ethernetwork DI-704P Manual de usuario
D-Link
D-Link DIR-882 Manual de usuario
D-Link
D-Link DSL-G604T Manual de usuario
D-Link
D-Link DIR-610N Manual de usuario
D-Link
D-Link DES-1008M Manual de usuario
D-Link
D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Manual de usuario
D-Link
D-Link DI-604UP Manual de usuario
D-Link
D-Link DI-LB604 - Load Balancing Router Manual de usuario
D-Link
D-Link DIR-808L Manual de usuario
D-Link
D-Link DSL-604+ Manual de usuario
D-Link
D-Link DSS-24+ Manual de usuario
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad