D-Link DIR-819 Manual de usuario

Wireless AC750 Dual Band Router

with High-Gain Antennas

Quick Install Guide

DIR-819

If any of the above items are missing, please contact your reseller.

DIR-819 AC750 Dual Band Router with High-Gain Antennas

Power Adapter

Ethernet Cable

Wi-Fi Conguration Card

Quick Install Guide

Network Requirements:

Web-based Conguration Requirements

Package Contents

Minimum Requirements

• An Ethernet-based broadband modem

• Computer, smartphone or tablet with a Web browser*

* We recommend using the latest available browser version for the best performance.

Hardware Overview

1Power LED A solid green light indicates a proper connection to the power supply.

22.4G LED A solid green light indicates the 2.4GHz wireless function is working

properly. This light will blink during data transmission.

35G LED A solid green light indicates the 5GHz wireless function is working properly.

This light will blink during data transmission.

4Internet LED A solid green light indicates a connection to the Internet port.

5WPS LED A solid green light indicates a successful connection using WPS. The light

will blink during the WPS process.

6Reset Button Press and hold the reset button with a paper clip for 10 seconds to reset the

router to the factory default settings.

7Power Button Press to power the router on and o.

8Power Port Connect the supplied power adapter.

9WPS Button

Press for 2 seconds to start the WPS process. The WPS LED will blink during

the process.The light will turn solid green when successfully connecting

to a device.

10 Internet Port Connect a broadband modem to this port using an Ethernet cable.

11 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and game consoles.

1 432 5

67 8 9 10 11

• Users with DSL providers - If you are using a PPPoE connection, you will need

your PPPoE user name and password. If you do not have this information, contact

your Internet provider. Do not proceed until you have this information.

• Users with Cable providers - Make sure you unplug the power to your modem.

In some cases, you may need to turn it o for up to 5 minutes.

•Advanced Users - If your Internet Service Provider (ISP) provided you with a

modem/router combo, you will need to set it to “bridge” mode so the DIR-819

router can work properly. Please contact your ISP or refer to the user manual for

your modem/router device.

Before you Start

1Unplug the power to your DSL or Cable modem.

2Connect an Ethernet cable from the Internet port of the router to the

Ethernet port on your DSL or Cable modem.

Modem

Connect your Router

INTERNET

POWER POWER PORT WPS

4321

RESET

Ethernet Port

Modem

Ethernet Cable

DIR-819

Internet Port (yellow)

3Connect another Ethernet cable from the Ethernet port on your computer

to one of the LAN ports on the router. You can also connect wirelessly

to the router with your computer. Use the supplied Wi-Fi Conguration

Card for the Wi-Fi network name (SSID) and Wi-Fi password of the router.

Complete steps 4 and 5 before attempting to connect.

4Plug the power back into your DSL or cable modem. Please wait about

one minute before continuing.

INTERNET

POWER POWER PORT WPS

4321

RESET

INTERNET

POWER POWER PORT WPS

4321

RESET

Computer

Modem

Ethernet Cable

DIR-819

5Plug the power adapter into your router and connect to an available

power outlet or surge protector. If the Power LED does not light up, press

the Power button on the back of the router.

6After the router has powered up, verify that the Power and Internet LEDs are

both lit. If so, you can now connect devices to your router using the Wi-Fi

Name (SSID) and Password found on the D-LinkWi-Fi Conguration Card

or sticker on your router.

If you want to change yourWi-Fi Network Name or Password, continue on to

the Conguration section.

Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari)

and enter http://dlinkrouter.local./ or the IP address of the router

(http://192.168.0.1).

INTERNET

POWER POWER PORT WPS

4321

RESET

Computer

Modem DIR-819

Conguration (Optional)

1 2 3 4 INTERNET 12V --1.5A POWER WPS

Wireless

Computer*

When the Welcome screen appears, click Next to continue.

The router will automatically detect your Internet connection type. If not, then

select your Internet connection and click Next to continue.

DSL (PPPoE) users enter your PPPoE user name and password supplied by

your ISP. Click Next to continue.

For both the 2.4GHz and 5GHz bands, create a name and password for your

Wi-Fi Network. Your wireless devices (i.e., tablets, smartphones, and laptops)

will need to have this information entered to be able to connect to your

wireless network. Click Next to continue.

Continue with the Setup Wizard to nish conguring your DIR-819 router.

Once completed your router will be online.

Congratulations! You have completed the router installation.

If you have a Static IP connection, enter the IP information and DNS settings

supplied by your ISP. Click Next to continue.

How do I connect my wireless devices to the DIR-819 router?

1. Open your wireless network utility that displays available wireless networks.

2. Select the Wi-Fi Network name you assigned in the wizard and connect.

Note: If you did not run the setup wizard or you reset the router to its default

settings, refer to the Wi-Fi Conguration Card included for the default Wi-Fi

Network Name and Wi-Fi Password.

You can also connect wireless devices to the DIR-819 router using WPS:

1. Press the WPS button on the DIR-819 for three seconds.

2. Within one minute press the WPS button on your wireless device.

3. Allow up to two minutes to connect.

Note: Some devices may require you to log in to a utility to start the WPS process.

Refer to the user manual of the device you want to connect to the router if you do

not know how to start the WPS process.

How do I change the wireless settings on the DIR-819 router?

1. Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and

enter http://dlinkrouter.local./ You can also enter the IP address of the

router (http://192.168.0.1).

2. At the login screen, enter the router password you created in the wizard (no

password by default).

3. Go to Setup > Wireless Settings > Manual Wireless Network Setup to

create a new Wi-Fi network name (SSID) and Wi-Fi password.

*Documentation available at http://support.dlink.com/DIR-819 (USA) or

http://support.dlink.ca/DIR-819 (Canada)

Troubleshooting

GPL Code Statement

This D-Link product includes software code developed by third parties, including

software code subject to the GNU General Public License (“GPL”) or GNU Lesser

General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL,

and information on obtaining access to the GPL code and LGPL code used in this

product, are available to you at:

http://tsd.dlink.com.tw/GPL.asp

The GPL code and LGPL code used in this product is distributed WITHOUT ANY

WARRANTY and is subject to the copyrights of one or more authors. For details,

see the GPL code and the LGPL code for this product and the terms of the GPL and

LGPL.

Written Oer for GPL and LGPL Source Code

Where such specic license terms entitle you to the source code of such software,

D-Link will provide upon written request via email and/or traditional paper mail

the applicable GPL and LGPLsource code les via CD-ROM for a nominal cost to

cover shipping and media charges as allowed under the GPL and LGPL.

Please direct all inquiries to:

Email:

GPL[email protected]

Snail Mail:

Attn: GPLSOURCE REQUEST

D-Link Systems, Inc.

17595 Mt. Herrmann Street

Fountain Valley, CA 92708

GNU GENERAL PUBLIC LICENSE

Version 3, 29 June 2007

View the full GPL Code Statement at http://www.gnu.org/licenses/gpl.html

Otros manuales para DIR-819

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Enrutador de red de D-Link

D-Link

D-Link DSL-584T Manual de usuario

D-Link

D-Link DSR-250V2 Manual de usuario

D-Link

D-Link M60 Manual de usuario

D-Link

D-Link DSL-226 Manual de usuario

D-Link

D-Link DWR-953 Manual de usuario

D-Link

D-Link DSL-224 Manual de usuario

D-Link

D-Link DWR-921 Manual de usuario

D-Link

D-Link DES-1005D Manual de usuario

D-Link

D-Link DSL-G604T Manual de usuario

D-Link

D-Link DSL-224 Manual de usuario

D-Link

D-Link DSL-3782 Manual de usuario

D-Link

D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Manual de usuario

D-Link

D-Link DIR-855L Manual de usuario

D-Link

D-Link AC1900 Manual de usuario

D-Link

D-Link DES-2218 Manual de usuario

D-Link

D-Link DSL-G604T Manual de usuario

D-Link

D-Link Xstack DGS-3300 Series Manual de usuario

D-Link

D-Link DMC-300SC - Media Converter - External Manual de usuario

D-Link

D-Link DSL-502T Manual de usuario

D-Link

D-Link DIR-835 Manual de usuario

D-Link

D-Link DSL-G2452GR Manual de usuario

D-Link

D-Link DES-1016D - Switch Manual de usuario

D-Link

D-Link DSL-500G Manual de usuario

D-Link

D-Link DIR-878 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad