D-Link DI-804V Manual de usuario
D-Link DI-804V
Broadband VPN Router
Manual
Rev. 031902
Building Networks for People
2
Contents
Package Contents .................................................... 3
Introduction............................................................... 4
IP Address Settings and Computer Settings ............ 8
Using the Configuration Utility .................................. 9
Basic Setup ............................................................ 10
Device Information.................................................. 18
Device Status ......................................................... 19
Advanced Settings.................................................. 20
System Tools .......................................................... 29
Configuring Your PCs to Connect to the DI-804V
Router..................................................................... 34
Networking Basics .................................................. 37
Contacting Technical Support................................. 49
Limited Warranty and Registration ......................... 50
3
Package Contents
Contents of Package:
• D-Link DI-804V Broadband VPN Router
• Manual
• Quick Installation Guide
• Power Adapter - 5V DC, 2A*
*Using a power supply with a different voltage rating will damage and void
the warranty for this product. If any of the above items are missing, please
contact your reseller
System Requirements:
Internet Explorer 4.0 or higher or Netscape Navigator 4.0 or higher, with JavaScript
enabled
One computer with an installed 10Mbps, 100Mbps or 10/100 Mbps Ethernet adapter
One Modem or ISDN TA (if a dial-up connection is needed)
One RJ-45 DSL/Cable Modem for Internet connection
4
Introduction
The D-Link DI-804V Broadband VPN Router enables your network to
connect to the Internet via a secure, private connection using a Cable/DSL
modem, such as the D-Link DCM-200 Cable Modem. The Virtual Private
Network that is created on the Internet between your home and your office
(with a VPN server) is secure from interference when you use the DI-804V.
It is an ideal way to connect your computer to a Local Area Network (LAN).
After completing the steps outlined in the Quick Install Guide (included in
your package) you will have the ability to share information and resources,
such as files and printers, and take full advantage of a “connected”
environment for work or play!
Connect the WAN port on the DI-804V to the Cable/DSL modem (e.g., the
DCM-200) using an Ethernet cable. Your entire LAN can now access the
Internet using just one Internet account. The DI-804V has 4 LAN ports.
That means that 4 computers can share the benefits of the DI-804V- equipped
network.
For the price of one Internet account, the DHCP-capable DI-804V will
automatically provide unique IP Addresses for all the computers on the
network. (DHCP stands for Dynamic Host Configuration Protocol. It is a
protocol for assigning IP Addresses automatically. With a DHCP router like
the DI-804V, there is no need to assign static IP Addresses, or purchase
multiple addresses from the ISP - Internet Service Provider.)
Everyone in your home can access the Internet on his or her own computer, at
the same time, without any noticeable decrease in speed.
With the serial port, you can connect an analog modem (dial-up modem) as a
back up in case of any difficulties that may arise with the Cable or DSL
connection.
With Firewall Protection, Hacker attack logging, and Virtual Private
Networking, the DI-804V provides a level of security suitable for many
businesses.
5
This manual provides a quick introduction to network technology. Please
take a moment to read through this manual and get acquainted with your
DI-804V.
Front View
LED Indicators
LAN (1-4) LINK (Green) Green LED will LIGHT when link is
established.
Link/Act ACT (Green) Green LED will BLINK when packet is
transmitting or receiving.
Serial (Green) Green LED will LIGHT when a good link is
established.
WAN (Green) Green LED will LIGHT when a good link is
established.
Status (Yellow) Yellow LED will BLINK when started up
and when firmware is upgraded.
Power (Red) Red LED will LIGHT when powered ON.
6
Rearview
Power (5V DC) Connect the DC power adapter to the Power port
WAN Connect DSL/Cable modem to the WAN Ethernet port
Serial Connect a 56k modem/ISDN TA to the serial port
Ports 1-4 Connect networked devices such as computers and ftp
servers to the four LAN ports, which support auto
crossover
Reset To reload the factory default settings, press the reset button
for 5-6 seconds. Pressing the Reset button will clear the
current data.
Product Features
VPN
Provides Virtual Private Networking when communicating with a VPN server-
equipped office, or with another DI-804V-equipped network. Supports PPTP and
L2TP pass through function.
DSL/Cable Modem support
The DI-804V can connect any DSL/Cable Modem to the network.
DHCP
The DI-804V is a DHCP-capable router. It automatically assigns unique IP
Addresses to each network users that is connected to the DI-804V, for the price of
one Internet account.
7
Firewall Protection
Supports general hacker attack pattern monitoring and logging
PPPoE Client
Supports PPPoE client function to connect to the remote PPPoE server.
Virtual Server
Allows the internal server to be accessible from the Internet
Upgradeable New Features
Allows new features to be added in the future
High Performance 32 bit RISC CPU Engine
With the most advanced 32 bit RISC CPU Engine, DI-804V guarantees full
compatibility with future DSL/Cable technologies
IPSec Security
(DES, 3DES, MD5, SHA-1)
Idle Timer
Set a specified idle-time before automatically disconnecting
Dial-on Demand
Eliminates the need for Dial-up. Automatically logs in to your ISP
Serial port
May connect to a 56k modem or ISDN TA (should a Cable/DSL connection be
unavailable or fail.)
Web-Based Configuration
No software installation required. Can be configured through a web browser making
it OS independent
8
IP Address Settings and Computer Settings
In order to install the DI-804V you will need to check your computer’s
settings and the values from your ISP.
The information offered by your ISP:
• Dynamic IP settings
• Your fixed IP address for the gateway
• Your subnet mask for the gateway
• Your default gateway IP address
• Your DNS IP address
If you would like to use PPPoE, you will need the following values from your
ISP in order to install your router:
• User Name
• Password
The static IP settings for the PC:
• Your PC’s fixed IP address
• Your PC’s subnet mask
• Your PC’s default gateway
• Your PC’s primary DNS IP address
Note: The router’s default IP address setting is 192.168.0.1.
Dynamic IP Settings:
The dynamic IP settings for the PC. It is recommended that you leave your IP
settings as automatically assigned. By default, the gateway is a DHCP server, and it
will give your computer the necessary IP settings.
9
Using the Configuration Utility
Launch your web browser and type the device IP address (http:// 192.168.0.1)
in the browser’s address box. This IP address is the default value of your
gateway. Press Enter.
Note: Please make sure that the computer’s IP Address is in the same IP
Address range as the DI-804V. The IP Address of the DI-804V is
192.168.0.1. All computers on your network must be within that range, for
instance, the computer IP Address could be 192.168.0.x. All computers on
the network must have the same subnet mask.
The main menu appears showing all the settings available.
10
Basic Setup
Basic setup is a step-by-step process that will let you input all the basic
settings.
Click BASIC SETUP
A username and password screen will appear. Leave the password box empty
and type admin (the default username) in the username box.
Click OK
The Setup Wizard’s page will appear.
Note: If you choose to input a password at any time, please remember it. If
you should lose the password, you will need to reset the unit. After you reset
the DI-804V, all your settings will be lost and will need to be re-input.
Otros manuales para DI-804V
3
Tabla de contenidos
Otros manuales de Enrutador de red de D-Link
D-Link
D-Link Xtreme N L7-N-R2000 Manual de usuario
D-Link
D-Link DSL-524T Manual de usuario
D-Link
D-Link Ethernet Switches Manual de usuario
D-Link
D-Link DIR-300NRU Manual de usuario
D-Link
D-Link DIR-510L Manual de usuario
D-Link
D-Link DGS-3700 Series Manual de usuario
D-Link
D-Link DGS-6600 Series Manual
D-Link
D-Link DIR-615 - Wireless N Router Manual de usuario
D-Link
D-Link DSL-G624M Manual de usuario
D-Link
D-Link DES-1016R - DES 1016 Switch Manual de usuario
D-Link
D-Link DSL-2730B Manual de usuario
D-Link
D-Link DSL-514 Manual de usuario
D-Link
D-Link DSL-2750U Manual de usuario
D-Link
D-Link DFL-900 Manual de usuario
D-Link
D-Link DSL-1500G v.A1 Manual de usuario
D-Link
D-Link DIR-611 Manual de usuario
D-Link
D-Link DSL-G256DG Manual de usuario
D-Link
D-Link DIR-820L Manual de usuario
D-Link
D-Link DHP-347AV Manual de usuario
D-Link
D-Link DWR-953 Manual de usuario
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad