D-Link AirPlus Xtreme DI-624 Manual de usuario

This product can be set up usingThis product can be set up using

This product can be set up using

anan

any curry curr

y curry curr

y currenen

enen

ent web brt web br

t web brt web br

t web browserowser

owserowser

owser, i.e, i.e

, i.e, i.e

, i.e.,.,

.,.,

Internet Explorer 6 or NetscapeInternet Explorer 6 or Netscape

Internet Explorer 6 or Netscape

Navigator 6.2.3.Navigator 6.2.3.

Navigator 6.2.3.

DI-624

AirAir

Air

Plus XtremePlus Xtreme

Plus Xtreme

G 2.4GHzG 2.4GHz

G 2.4GHz

Wireless RouterWireless Router

Wireless Router

5V DC Power Adapter

specifications subject to change without notice. DI-624. 08122003

Before You Begin

1.1.

1. If you purchased this router to share your high-speed Internet connection with other

computers, you must have either an Ethernet-based Cable or DSL modem with an

established Internet account from an Internet Service Provider (ISP).

2.2.

2. It’s best to use the same computer that is connected to your modem for configuring

the DI-624 AirPlus Xtreme G Wireless Router. The DI-624 acts as a DHCP server

and will assign all the necessary IP address information on your network. See

Appendix at the end of this Quick Installation Guide or the Manual on the CD-

ROM for setting each network adapter to automatically obtain an IP address.

Check Your Package Contents

DI-624 AirPlus Xtreme

2.4GHz Wireless

Router

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight Through) Cable

Using a power supply with

a different voltage rating will

damage and void the warranty

of this product.

If any of the above items are missing, please contact your reseller.

TMTM

Connecting The DI-624 Wireless Router To

Your Network

A. First, connect the power adapter to the receptor at the back panel of the

DI-624 and then plug the other end of the power adapter to a wall outlet or power

strip. The Power LED will turn ON to indicate proper operation.

B. 1. Power off your Cable or DSL modem; some devices may not have a on/off

switch and will require you to unplug the power adapter. Now, the DI-624 should

be powered on and the Cable / DSL modem should be turned off.

2. Cable / DSL modem (Power Off) – DI-624 (Power On)

Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL

modem. After the Ethernet cable is securely connected, power on the Cable /

DSL modem by turning on the unit or plugging in the power adapter.

3. Cable / DSL modem (Power On) – DI-624 (Power On)

Insert the other end of the Ethernet cable to the WAN PORT on the back panel

of the DI-624. The WAN LED light will illuminate to indicate proper connection. If

the WAN LED is not illuminated, please go back to step B1 and repeat the

instructions.

C. Insert an Ethernet cable to LAN port 1 on the back panel of the DI-624 and an

available Ethernet port on the network adapter in the computer you will use to

configure the DI-624. The LED light for LAN Port 1 will illuminate to indicate

proper connection. (Note: The LAN Ports on the DI-624 are Auto-MDI/MDIX.

Meaning you can use a straight-through or crossover Ethernet cable to the LAN

Ports.)

D. Computers equipped with 802.11g wireless adapters will be able to connect to

the DI-624. The DWL-G650 AirPlus Xtreme G Wireless Cardbus Adapter and the

DWL-G520 AirPlus Xtreme G Wireless PCI Adapter will be able to connect out

of the box with the router using their default wireless settings.

B. WAN PORT

This is for the connection

of an Ethernet cable to the

Cable or DSL modem

D. Antennas

Used to

wirelessly

connect to

802.11g or

802.11b

adapters.

C. LAN PORTS

These are the

connections for Ethernet

cables to Ethernet

enabled computers.

A. Receptor for

Power Adapter.

Reset Button

Pressing this button restores the Router to its original

factory default settings.

Restart Your Computer

Connecting Additional Computers

To The DI-624

LOCAL NETWORK LEDs – a

solid light on the port indicates

a connection to an Ethernet

enabled computer on ports 1-4.

This LED blinks during data

transmission.

Power LED – a solid

light indicates a proper

connection to the power

supply.

WLAN LED – a solid light

indicates that the wireless

segment is ready. This LED

blinks during wireless data

transmission.

Status LED – a blinking light

indicates that the DI-624 is

functioning properly.

When you have completed the steps in this Quick Installation Guide, your connected

network should look similar to this:

Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped

computers to the remaining Ethernet LAN ports on the back panel of the DI-624

WAN LED – a solid light

indicates connection on the

WAN port. This LED blinks

during data transmission.

Once you have logged in, the

Home screen will appear.

Click Run Wizard

Using The Setup Wizard

The logon pop-up screen will appear.

Open your Web browser and

type “http://192.168.0.1” into the

URL address box. Then press the

Enter or Return key.

Type “admin” for the username and

leave the password field blank.

Click OK

The Setup Wizard (continued)

You will see the following screens

Set up your new password.

You have the option to establish

a password.

Click Next

Choose your time zone from

the drop down list.

Click Next

If you selected Dynamic IP Ad-

dress, this screen will appear:

(Used mainly for Cable Internet

service.)

Click the “Clone MAC Address”

button to automatically copy the

MAC address of the network

adapter in your computer. You can

also manually type in the MAC

address.

The Setup Wizard (continued)

Select your Internet Connection.

You will be prompted to select the

type of Internet connection for your

router.

If you are unsure of which setting

to select, please contact your

Internet Service Provider.

Click Next

This setup should be done on

the computer that is registered

on the ISP’s network.

Please continue to Wireless Setup.

A this point, the setup wizard will try

to auto-detect your Internet connec-

tion type. If you have a Dynamic or

PPPoE connection, you will be

brought to the corresponding page.

Otherwise, you will see the following screen:

The Setup Wizard (continued)

If your ISP requires a Static IP

Address, and this option is

selected, then this screen will

appear:

Enter the IP address information

originally provided to you by your

ISP. You will need to complete all

the required fields.

Click Next

Please continue to Wireless Setup.

If your ISP uses PPPoE (Point-to-

Point Protocol over Ethernet), and

this option is selected, then this

screen will appear: (Used mainly for

DSL Internet service.)

Please be sure to remove any

existing PPPoE client software

installed on your computers.

Enter in the username and pass-

word provided to you by your ISP.

Click Next

Please continue to Wireless Setup.

If you wish to use encryption for

your 802.11g network, the DI-624 is

capable of two levels of wireless

encryption - 64-bit and 128-bit. By

default the encryption is dis-

abled. You can change the encryp-

tion settings for more secure

wireless communication.

The Setup Wizard (continued)

The default wireless settings for

your 802.11g wireless network are:

SSID = default

Channel = 6

You can change these settings to

match an existing wireless network.

Click Next

Wireless Setup

Click Next

Your Setup is Complete!

Click Restart

Click Close

Test Internet Connection

You will be returned to the Home tab.

For additional settings or information,

refer to the Advanced, Tools, or

Status tabs on the web-management

interface; or to the Manual located on

the CD.

Then relaunch your Web browser

(i.e., Internet Explorer or Netscape

Navigator), to link to your favorite Web

site to test your Internet connection.

Click to Exit

To connect to the network, make sure the

network adapter in your computer is configured

properly. Here’s how to configure the network

adapter to obtain an IP address automatically

for the DI-624 Wireless Broadband Router.

APPENDIX (continued)

Restart your computer (if necessary)

Click OK

Select Obtain an IP address

automatically

Click Internet Protocol (TCP/IP)

Click Properties

For Microsoft Windows XP: Go to Start >

right click on My Network Places >

select Properties > Right click on the

Network Connection associated with the

Ethernet adapter and select Properties

(i.e., D-Link DFE-530TX+).

Tabla de contenidos

Otros manuales de Enrutador de red de D-Link

D-Link

D-Link DIR-605LB2 Manual de usuario

D-Link

D-Link DIS-200G-12S Manual de usuario

D-Link

D-Link GO-SW-5E Manual de usuario

D-Link

D-Link Verizon DSL-2750B Manual de usuario

D-Link

D-Link GO-SW-5E Manual de usuario

D-Link

D-Link DES-3010F Manual de usuario

D-Link

D-Link DI-524 - AirPlus G Wireless Router Manual de usuario

D-Link

D-Link DES-1048G Manual de usuario

D-Link

D-Link DSL-524B Manual de usuario

D-Link

D-Link DXS-1210-12TC Manual de usuario

D-Link

D-Link DES-3326 Manual de usuario

D-Link

D-Link DIR-855L Manual de usuario

D-Link

D-Link DWR-932 Manual de usuario

D-Link

D-Link DIR-810L Manual de instalación y operación

D-Link

D-Link DSL-2740U Manual de usuario

D-Link

D-Link DGL-4100 - GamerLounge Broadband Gigabit Gaming... Manual de usuario

D-Link

D-Link DSL-2750E Manual de usuario

D-Link

D-Link DSL-224 Manual de usuario

D-Link

D-Link DI-206 Manual de usuario

D-Link

D-Link DI-1750 Manual de usuario

D-Link

D-Link DSL-504T Manual de usuario

D-Link

D-Link DWR-112 Manual

D-Link

D-Link DSL-3580L Series Manual de usuario

D-Link

D-Link DGS-3224TG Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad