D-Link DES-3204 Manual de usuario

DES-3204

4-Port Gigabit Ethernet Switch

D-View Management Module

User’s Guide

No part of this publication may be reproduced in any form or by any means or

used to make any derivative such as translation, transformation, or adaptation

without permission from D-Link Corporation/D-Link Systems Inc., as stipulated

by the United States Copyright Act of 1976.

Trademarks

D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc.

All other trademarks belong to their respective owners.

Limited Warranty

The software and reference material are provided “as are,” without warranty as

to their performance, merchantability or fitness for any particular purpose. D-

Link Corporation/D-Link Systems, Inc. reserve the right to revise this

publication and to make changes to its contents at any time, without obligation to

notify any person or entity of such revisions or changes.

Table of Contents

ABOUT THIS GUIDE.......................................................................................2

INTRODUCTION..............................................................................................3

DGS-3204 INTELLIGENT ETHERNET SWITCH.....................................................3

NETWORK MANAGEMENT..................................................................................3

INSTALLING THE MANAGEMENT MODULE..........................................5

REQUIREMENTS .................................................................................................5

INSTALLING THE MODULE SOFTWARE ...............................................................6

PREPARING THE SWITCH FOR MANAGEMENT.....................................................7

DGS-3204 MANAGEMENT.............................................................................8

ADDING YOUR DGS-3204 SWITCH TO THE MAP................................................8

THE MODULE DISPLAY....................................................................................10

Selecting Ports.............................................................................................11

MENU BUTTONS ..............................................................................................11

Configuration Menu Button.........................................................................12

Monitor Menu Button...................................................................................31

Reset Menu Button.......................................................................................41

INDEX...............................................................................................................44

DGS-3204 Ethernet Switch Management User’s Guide

2 About this Guide

DGS-3204 Management

User’sGuide

About this Guide

This User’s Guide tells you how to use the D-View network management system

(version 4.1 or later) to manage your DGS-3204 intelligent Gigabit Ethernet

switch, including how to install the D-View management module for the switch,

and how to use the module to control and monitor the switch. Additional

information on installing your switch and configuring it for management can be

found in the DGS-3204 User’s Guide.

DGS-3204 Ethernet Switch Management User’s Guide

Introduction 3

Introduction

DGS-3204 Intelligent Ethernet Switch

This guide discusses how to manage the DGS-3204 switch using the D-View

network management system. The DGS-3204 combines conventional Ethernet,

Gigabit Ethernet and switching technologies into one package. This device

features four ultra high-speed 1000BASE-SX Gigabit Ethernet switching ports

supporting.

Additional information about configuring the DGS-3204 Ethernet switch may be

found in the Ethernet switch’s hardware User’s Guide.

Network Management

As networks grow larger, network management becomes more and more of a

necessity. A large network requires a considerable amount of work to keep it

running smoothly, including time and effort spent on user support,

troubleshooting, network planning, and performance monitoring. The intent of a

network management system (NMS) is to make it possible to monitor a widely

spread-out network (possibly spanning many different sites) from a centralized

location.

Network management works by placing a small degree of “intelligence” in the

network elements (routers, switches, hubs, hosts, etc.) to be managed. This

intelligence takes the form of an agent that is capable of collecting statistics and

status information, as well as performing control operations that affect the

operation of the network. The agent responds to commands and requests for

information from the centralized network management system, allowing the

health and performance of the network to be monitored and adjusted.

DGS-3204 Ethernet Switch Management User’s Guide

4Introduction

A network protocol known as the Simple Network Management Protocol

(SNMP) is generally used to communicate between network management

stations and the devices they manage. SNMP was originally developed for

controlling the devices that made up the infrastructure of the Internet, and has

become the primary standard for network management. SNMP commonly runs

“on top of” the TCP/IP Internet Protocol, though other transmission methods are

possible.

Because a network management station can be used to manage a wide range of

devices, network management software is generally divided into two different

parts: a base platform consisting of software common to the management of all

devices; and a set of modules, each of which can communicate with a narrow

range of devices by way of their SNMP-based agents. If a new device type is

added to the network, then a new module (compatible with the particular

platform being used) needs to be added to facilitate its management.

This manual describes the module used on the D-View platform for controlling

DGS-3204 intelligent Gigabit Ethernet switches.

DGS-3204 Ethernet Switch Management User’s Guide

Installing the Management Module 5

Installing the Management Module

This section describes the requirements and procedures for installing the DGS-

3204 management module on your network management system.

Requirements

We recommend that your system meet the following requirements to be able to

use the DGS-3204 switch management module:

♦A PC-compatible computer with a 486DX2-66 or faster processor

♦Microsoft Windows version 3.1xor Microsoft Windows 95 or later

operating system.

♦D-View SNMP Network Management Program, version 4.1 or later.

♦8 megabytes (16M preferred) of main memory (RAM)

♦At least 10 megabytes of free hard disk space

♦A Windows-compatible mouse or other pointing device

♦An Ethernet network card with appropriate drivers

♦CD-ROM drive

DGS-3204 Ethernet Switch Management User’s Guide

6 Installing the Management Module

Installing the Module Software

Note: Please ensure that the D-View platform program has been installed

on the computer you are using for network management before proceeding.

Take the following steps to install the module on your network management

system:

1. Exit D-View if you are running it.

2. Insert the Setup/Application CD-ROM containing the module into your

CD-ROM drive (E: will be used in this manual although your CD-ROM

drive letter may be different).

3. If you are using Windows 3.1, choose Run… from the Program

Manager’s File menu. Under Windows 95, choose Run… from the

Start menu on the taskbar. When the dialog box appears, type the

pathname of the Install program on the CD-ROM drive

(E:\INSTALL)

4. Click OK. The installation program will start.

5. When the program prompts for your D-View Directory, enter the

pathname of the directory where you installed D-View, and click

Continue.

DGS-3204 Ethernet Switch Management User’s Guide

Installing the Management Module 7

6. The installation program will install all of the necessary files onto your

system. When it is finished, it will display the following dialog:

Click on the Exit button. The D-View network management system is now ready

to manage DGS-3204 Ethernet switches.

Preparing the Switch for Management

You will need to make sure that your switch is properly set up before you can

use the management module:

♦Ensure that the switch is connected to the same network as the network

management station.

♦Ensure that the switch’s TCP/IP settings are set properly. If the switch is

on the same local network, the network portion of the switch’s IP address

needs to be the same as that of the network management station. If they

are on separate LANs, the TCP/IP gateway (router) field of both the

switch and the router need to be set properly so that information can be

routed properly between the switch and the management station.

For more information about these and other items, consult the DGS-3204

hardware User’s Guide.

DGS-3204 Ethernet Switch Management User’s Guide

8 DGS-3204 Management

DGS-3204 Management

Adding your DGS-3204 Switch to the Map

Before you can manage individual DGS-3204 Ethernet switches, you need to

add them to your D-View network map. You can do this either by:

♦Using D-View’s Auto Discover capability to add all new SNMP-

manageable devices to the map.

♦Using the Add-Modify Map Device command to place each switch on the

map.

To use the second method:

1. Press the Add/Modify a device on the map button shown below.

2. Select the DGS-3204 from the icon list at the right of the Add-Modify

Map Device dialog.

Tabla de contenidos

Otros manuales de Enrutador de red de D-Link

D-Link

D-Link DSL-1500G v.A1 Manual de usuario

D-Link

D-Link DWR-980 Manual de usuario

D-Link

D-Link DSL-2730U Manual de usuario

D-Link

D-Link DIR-819 Manual de usuario

D-Link

D-Link DSL-2520U Manual de usuario

D-Link

D-Link myPocket DIR-457 Manual de usuario

D-Link

D-Link DIR-860L Manual de usuario

D-Link

D-Link DVG-N5402G/ACF Manual de usuario

D-Link

D-Link DXN-221 - HD MediaBridge Coax Network... Manual de usuario

D-Link

D-Link DSL-G2452GE Manual de usuario

D-Link

D-Link DSL-2543B Manual de usuario

D-Link

D-Link DSL-2640U Manual de usuario

D-Link

D-Link DXN-W224 Manual de usuario

D-Link

D-Link DSL-524T Manual de usuario

D-Link

D-Link DIR-878 Manual de usuario

D-Link

D-Link DSL-500 Manual de usuario

D-Link

D-Link DI-304 Manual de usuario

D-Link

D-Link dir-600m Manual de usuario

D-Link

D-Link DGS-3224TGR - Switch Manual de usuario

D-Link

D-Link DES-1026G Manual de usuario

D-Link

D-Link DES-3326 Manual de usuario

D-Link

D-Link Airspot DSA-3100 Manual de usuario

D-Link

D-Link DIR-855L Manual de usuario

D-Link

D-Link DIR-X1530 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad