D-Link DCM202 - Express Ethernetwork DOCSIS 2.0 Cable... Manual de usuario

Manual

Building Networks for People

USB/Ethernet

D-Link DCM-202

Broadband Cable Modem

Contents

Package Contents ...............................................................3

System Requirements for Configuration .............................4

Local Cable Network Service...............................................5

Prepare Your Workspace for the Installation .......................5

Introduction ..........................................................................7

Which Installation to Use? ...................................................8

Ethernet Installation..............................................................9

Troubleshooting the Ethernet Installation ..........................13

USB Installation..................................................................16

Troubleshooting the USB Installation.................................26

FrontandRearPanels..........................................................29

LEDs..................................................................................29

Back Panel Connectors .....................................................31

Technical Specifications ....................................................32

Technical Support ..............................................................35

Warranty .............................................................................36

Registration........................................................................39

Contents of Package:

D-Link DCM-202

USB/Ethernet Broadband Cable Modem

Manual, Warranty and Drivers on CD

PrintedQuick InstallationGuide

Package Contents

If any of the above items are missing, please contact your reseller.



CAUTION! You must use the 12VDC/1.0A power adapter that comes with

the D-Link DCM-202 cable modem. Using the wrong power adapter can

damage the cable modem.

One 12VDC/1.0A Power adapter

1 CAT 5 UTP Ethernet cable

1 USB cable

1 Cable modem stand to install the cable modem in a vertical

position

CAUTION! Be sure to read this entire User Manual from front to back in

sequence before installing the D-Link DCM-202 cable modem.

System Requirements for Configuration:

A cable-line splitter (not included), if you plan to have the cable modem

and a television connected to the same wall cable outlet.

An active two-way cable line.

To install the cable modem using the Ethernet port:



Verify that you have these items before beginning the installation:

To install the cable modem using the USB port:

Any PC running Microsoft Windows 95, Windows 98,

Windows Me, Windows 2000, or Windows NT operating

systems or a computer running any other operating (OS) that

supports the TCP/IP Internet protocol.

An active Ethernet port on your computer.

TCP/IP protocol installed. See the “Configuring the TCP/IP

Communications Protocol” section for more information on

installing the TCP/IP protocol.

A PC running Windows 98, Windows 2000, or Windows Me

operating system (OS). The USB drivers do not support the

Macintosh operating system.

Original Windows 98, Windows 2000, or Windows Me

installation CD or diskettes.

An active USB port on your computer



Before installing the modem:

1 Read this entire User’s Manual from front to back in sequence.

2 Find the Serial Number, RF and Ethernet address located on a sticker on

the cable modem and write them here:

Serial Number S/N: ____________________

RF and ETH MAC: ____________________

3 Contact your local cable service operator for Internet/cable network

access. Your local cable operator will check for cable access availability in

your area, install a cable line (if necessary), provide you with an access

account, set up configuration and verify other technical details.

4 Ask your local cable service provider about adding additional IP addresses

to your account. See “ Which Installation to Use?” for more information.

Local Cable Network Service

Prepare Your Workspace for the Cable Modem

Installation

Before installing the cable modem, you should prepare your workspace. You

can install the cable modem vertically, or attach the included four rubber feet

and install the cable modem horizontally.

To prepare your workspace:

1 Position the cable modem so that it is located near the computer and the

wall cable outlet. There should be plenty of room to guide the cables away

from the cable modem without crimping them.

2 Prepare the cable modem:

For vertical installation: Place the cable modem securely in the

included stand.

For horizontal installation: Use the four included feet to install the

cable modem.



Remove the backing paper and attach a foot to each of the corners on

the cable modem; be sure to attach the feet on the surface that

contains the model information stickers, as shown.

3 Do not restrict the airflow around the cable modem.

4 To enhance the best performance and proper function of the cable

modem, place it on a horizontal surface or workplace and make sure that

the cable modem does not move when it is operating.

Prepare Your Workspace for the Cable Modem

Installation (continued)

Introduction

Thank you for purchasing the D-Link “Broadband Cable Modem with USB &

Ethernet” DCM-202, which is an MCNS DOCSIS™ 2.0 cable modem featuring

the latest DOCSIS technology.

The cable modem enables your network cable operator to provide you with

broadband applications such as telecommunications, IP dedication for your

small office/home office (SOHO), or high-speed residential Internet access.

The cable modem provides a downstream speed of up to 38Mbps from the

cable network to your computer and 30Mbps from your computer to the cable

network.

The DES data encryption helps ensure privacy for the transmitted information.

Another distinctive feature of the cable modem is its easy installation, because

DHCP and TFTP clients can obtain automatic access to the IP address and

configuration from their network servers via the modem. SNMP agents permit

remoteconfiguration and monitoringfrom amanagement station equippedwith

an SNMP server.

Features

Decide Which Installation Process to Use

The cable modem enables you to connect to the Internet using either your

computer’s Ethernet or USB port.

Be sure to follow the installation steps for the setup you want to use. Using the

Ethernet setup enables you to use a hub to connect multiple computers to the

cable modem. To do this, you might have to obtain additional IP addresses

from your cable operator.

Using the USB port enables you to install the cable modem more quickly and

easily than connecting to the Internet using the Ethernet port, because you do

not have to install a network interface card (NIC) into your computer. The USB

port, however, only enables you to connect one computer to the cable modem.

See“Installing the Cable Modem Usingthe Ethernet Port”, or see“Installing the

CableModem Using theUSB Port” inthe following pages,for more information.



Full-featured compact, economical cable modem with Ethernet

and USB ports

DOCSIS 2.0-compliant

Capable of handling downstream data transmission speeds up to

38Mbps; upstream to 30Mbps

RJ-45 10/100BaseT Ethernet port provides traditional industry-

standard connection

USB port allows easy plug-and-play attachment to PCs with the

latest Microsoft Windows operating system.

ExtensiveSNMP management support: MIB-II,

Ethernet-likeMIB, Bridge MIB,Cable DeviceMIB,

Baselineprivacy InterfaceMIB, RF Interface MIB

Easy-to-read front panel LED’s clearly display network status and

activity

Installing the Cable Modem Using the Ethernet

Port

DCM-202

Installing the Cable Modem Using the Ethernet

Port

CAUTION! Be sure to read this entire User’s Manual from front to back in

sequencebeforeinstallingtheD-LinkDCM-202USB/EthernetBroadbandCable

Modem.

This chapter describes how to install the cable modem using the Ethernet port.

Using the Ethernet port enables you to use a single connection to the Internet

or use a hub to connect multiple computers to the cable modem. You can also

use multiple IP addresses from your cable operator when using the Ethernet

connection.See“InstallingtheCableModemUsingtheUSBPort”inthismanual

to set up the USB Connection.

You can use the Ethernet port to connect to the Internet with the following

operatingsystems: Windows 95, Windows 98,Windows 98SE,Windows 2000,

Windows Me, Windows NT, or Macintosh 7.6 (or later).

VerifytheTCP/IPProtocolConfiguration

Beforeinstalling themodem usingthe Ethernet setup, you must verify that your

computer has the TCP/IP protocol installed. Follow the procedure for your

operating system to verify or install the TCP/IP protocol.

Configuring TCP/IP on Windows 95, Windows 98, and

Windows Me

To configure TCP/IP on a computer with the Windows 95, Windows 98,

or Windows Me operating system:

1 Right-click the Network Neighborhood icon (Windows Me: the My Network

Places icon) on the Windows desktop and click Properties.

Otros manuales para DCM202 - Express Ethernetwork DOCSIS 2.0 Cable...

Tabla de contenidos

Otros manuales de Módem de D-Link

D-Link

D-Link DVA-2800 Manual de usuario

D-Link

D-Link DWM-311 Manual de usuario

D-Link

D-Link DSL-G604T Manual de usuario

D-Link

D-Link WA182D1 Manual de usuario

D-Link

D-Link DSL-604T Manual de usuario

D-Link

D-Link DSL-260I Manual de usuario

D-Link

D-Link DSL-520B Manual de usuario

D-Link

D-Link DSL-300T Manual de usuario

D-Link

D-Link DSL-200 Manual de usuario

D-Link

D-Link DVA-2800 Guía de configuración

D-Link

D-Link DSL-2320B - 24 Mbps DSL Modem Manual de usuario

D-Link

D-Link DSL-2740B Manual de usuario

D-Link

D-Link DSL-100D - 8 Mbps DSL Modem Manual de usuario

D-Link

D-Link DSL-320B Manual de usuario

D-Link

D-Link DU-562M - 56 Kbps Fax Manual de usuario

D-Link

D-Link DSL-24MF - POTS Filter Manual de usuario

D-Link

D-Link DCM-100 Manual de usuario

D-Link

D-Link DCM202 - Express Ethernetwork DOCSIS 2.0 Cable... Manual de usuario

D-Link

D-Link DCM-100 Manual de usuario

D-Link

D-Link DCM202 - Express Ethernetwork DOCSIS 2.0 Cable... Manual de usuario

D-Link

D-Link P.DG A4001N A-000-1A1-AE Manual de usuario

D-Link

D-Link DSL-362T Manual de usuario

D-Link

D-Link DWM-152 Manual de usuario

D-Link

D-Link DWM-311 Manual de usuario

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario