D-Link DSL-320B Manual de usuario

Setting Up Your

D-Link DSL 320B

Item code: 046330

Read this first

What’s in the box:

Before you start

Has your service gone live?

Don’t follow these instructions until you have

received confirmation that your broadband

service is ready to use.

Have you got your broadband username

and password to hand?

It’s in the email we send you when your service

is activated, it looks like this:

Introduction

Hello,

Looking to setup the D-Link 320B Ethernet Modem?

Follow this Quick Setup guide and you’ll be online

in no time at all.

Quick Installation

Service Broadband username format

Plusnet username@plusdsl.net

Madasafish username@madasafish.com

Force9 usern[email protected]

Free-Online usern[email protected]

You don't need the CD’s Quick Installation to get

started. Go to Page 6 for a guide to using a Web

browser based setup.

1. Put the setup CD into your computer's CD/DVD

drive. The CD should automatically start.

2. If the disc doesn’t start, you can click the CD

icon with your right mouse button and select

Autoplay from the menu.

3. The start page will appear on your screen.

Click the Quick Installation Start button.

4. The first step of the Quick Installation is to

power up the modem.

6. Plug the adapter into a power socket, make sure

the power socket is switched on. 9. You will now connect the modem to your

computer.

5. Remove the sticky label from the modem.

7. Plug the power adapter into the modem.

8. Switch the modem on and check the power

light comes on. If it does, you can click the Next

button on your computer screen. If not, see the

Troubleshooting section on the last page of this

guide.

Item code: 046330

11. Connect the other end of the Ethernet cable

to a free network socket on your computer.

If the LAN comes on, click Next. Otherwise see

Troubleshooting on the last page of this guide.

10. Connect the Ethernet cable to the back of the

modem.

12. Next, connect your modem to your broadband

enabled phone line.

13. Plug one end of the DSL cable into the

microfilter. Then plug the microfilter into

your telephone socket.

15. Next, the modem will try to detect your

14. Plug the other end of the DSL cable into the

socket marked 'DSL'. The DSL light on the front of

the modem will flash and then stay on. If not, see

Troubleshooting on the last page of this guide.

17. Make sure the following settings are selected,

then click Next.

Your broadband username will take the following

form:

18. Next, type in your broadband username and

password.

19. The modem will now connect to your

broadband service using the settings you've

provided. This might take a few minutes to

complete.

16. Choose United Kingdom for Country and

Other for ISP.

Protocol: PPPoA

Encapsulation: VC Mux

VPI: [0-255]: 0

VCI: [32-65535]: 38

MTU: 1400

Service Broadband username format

Plusnet username@plusdsl.net

Madasafish username@madasafish.com

Force9 usern[email protected]

Free-Online usern[email protected]

Web browser based setup

1. First, refer to the previous Quick Start section of

this guide to plug the hardware in. When done,

open your web browser.

In the Address line, type in 192.168.1.1, then

press Enter.

20. When the modem connects to your service

you'll see a congratulations screen. That's it, you’re

connected!

To start using your service click on the

Start Browsing button, or just open your web

browser.

Your broadband settings will be saved in the

modem, so you’ll connect whenever the modem is

switched on.

If your Quick Installation CD doesn't work, you can

set up your modem using a web browser.

You can also use this method to update your

modem settings after you’ve set it up, or access

Advanced Settings.

2. A login page will appear, enter the modem's

administration username and password and click

Username: admin

Password: admin

Item code: 046330

Enter the following settings, then click

Apply Settings.

Manual ADSL connection Settings:

PPoE/PPPoA

PPPoE/PPPoA Internet Connection Type:

Username: Your broadband username

Password: Your broadband password

Connection Type: PPPoA VC-Mux

MTU: 1400

Idle Time Out: 0

VPI: 0

VCI: 38

See page 5 for the format that your broadband

username will take.

3. From the ADSL setup page you can choose

either the Setup Wizard or Manual Setup. Tick

Manual Setup.

Troubleshooting

The following table explains what the modem's

status lights mean:

Power Power light not on

Check the power adapter is plugged in.

Check the cable is firmly seated in the

back of the modem.

Check the plug socket is switched on and

working.

DSL DSL light flashing or off

Check your DSL cable connects your

modem to the microfilter.

Check that your microfilter is connected

properly.

Interference caused by other devices on

your telephone line are a common cause

of problems.

For more information about fitting

Microfilters visit our support pages at:

http://support.plus.net

LAN LAN light flashing or off

Check the Ethernet cable is plugged into

your modem.

Check the Ethernet cable is plugged into a

network socket on your computer.

Test with another Ethernet cable, in case

there’s a problem with the provided one.

Status What the Status light means:

The status light will flash to indicate that a

connection is active.

The status light comes on when you first

switch the modem on. If the light stays on

this means that the modem has failed its

internal test and should be restarted.

Otros manuales para DSL-320B

Tabla de contenidos

Otros manuales de Módem de D-Link

D-Link

D-Link ENW-3503 Manual de usuario

D-Link

D-Link DWA-182 Manual de usuario

D-Link

D-Link TALK BOX Series Manual de usuario

D-Link

D-Link DMW-221 Manual de usuario

D-Link

D-Link DSL-500B Manual de usuario

D-Link

D-Link DCM-201 Manual de usuario

D-Link

D-Link DWA-X3000 Manual de usuario

D-Link

D-Link DSL-300G Manual de usuario

D-Link

D-Link DSL-100D Manual de usuario

D-Link

D-Link DSL-526B Manual de usuario

D-Link

D-Link WebCruiser DFM-560EL Manual de usuario

D-Link

D-Link DCM-604 Series Manual de usuario

D-Link

D-Link DSL-124 Manual de usuario

D-Link

D-Link DSL-100D Manual de usuario

D-Link

D-Link DSL-360T Manual de usuario

D-Link

D-Link DSL-2544N Guía de configuración

D-Link

D-Link DSL-320B Manual de usuario

D-Link

D-Link DCM-200 Manual de usuario

D-Link

D-Link DCM-604 Series Manual de usuario

D-Link

D-Link Conexant HSFi DFM-562IS Manual de usuario

D-Link

D-Link DSL-300T Manual de usuario

D-Link

D-Link DSL-300T Manual de usuario

D-Link

D-Link DSL-310 Manual de usuario

D-Link

D-Link DCM202 - Express Ethernetwork DOCSIS 2.0 Cable... Manual de usuario

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario