CYP CM-397M Manual de usuario
CM-397M
CGA to WXGA Converter
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version VR1.0 May 2012
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 27/06/12 Preliminary Release
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................3
6.3 Top Panel ..........................................4
7. OSD Menu .............................................. 5
8. Connection and Installation................. 6
9. Specications ........................................ 7
10. Acronyms ............................................. 8
1
1. INTRODUCTION
This is an analog CGA (RGB) or Component (YCbCr) to PC Converter
box that can scale signal to 3 different PC modes of VGA, XGA or
WXGA. It enables you to connect your RGB or YCbCr signal source
such as game boards or video player to a PC display. Further features
such as phase & H/V position adjustment, eld-invert setting and OSD
display allows users with quality image and friendly use on displaying
the image.
2. APPLICATIONS
• CGA to PC conversion
• Component (YCbCr) video to PC conversion
3. PACKAGE CONTENTS
• Component/CGA to PC Converter
• D-Sub 15pin to 3RCA Component Cable
• 5V DC Power Supply Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
• Input source equipment such as PC/Video player and output TV/
monitor with connection cables.
2
5. FEATURES
• Accepts RGB or YCbCr format and converts to PC format
• Scales CGA/Component YCbCr 480i/576i up to VGA/XGA/WXGA
PC resolution
• 50/60Hz frame rate conversion ensures glitch-free display (576i only)
• The input of RGB is auto detected and can be RGBHV, RGB H+V or
RGsB(sync. on G)
• The input of YPbPr is auto detected and can be YPbPrHV, YPbPrS or
YPbPr(sync. on Y)
• Play video games on your PC monitors
• Supports CGA at 480i and 576i
• Supports Phase and H/V position adjustment
• Supports Field-invert setting
• Supports Separation Sync, Composite Sync, Sync-on-Green and
Sync-on-Y
• High-resolution output picture
• Plug & play-No driver software required and easy to set up for use
• Palm size design for handy carrying
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
CGA
In
DC
5V
1 2
1CGA IN
Connect the input source equipment such as PC or video player
with D-Sub 15pin cable or YPbPr to D-Sub 15pin adaptor cable.
2DC 5V
Connect the power adaptor included in the package and plug it
into the AC wall outlet for power supply.
6.2 Rear Panel
VGA
XGA
WXGA
PC
OUT
1 2
1VGA/XGA/WXGA Switch
Switch the dipswitch for output resolution between VGA, XGA or
WXGA.
2PC OUT
Connect the display TV/monitor with D-Sub 15pin cable for image
output.
4
6.3 Top Panel
Component/CGA to PC converter
1 2
1MENU button
Press this button once to bring out the current input & output
information and while the information still appear on the screen
press it again to select input signal with RGB or YCbCr. To enter
into OSD menu, press and hold this button for 3 seconds. And press
it repeatedly to cycle through the selections and leave the OSD
menu for few seconds for device to switch the setting.
2INPUT LED
This LED will illuminate according to input source’s signal, when in
red the input signal is RGB, when in green the input signal is YCbCr.
5
7. OSD MENU
IN 576i
OUT WXGA
Phase Adjust
IN Color Space
H Position
V Position
Field Invert
Information
System Reset
Exit
1
2
3
4
5
6
7
8
1The rst block of the OSD will display the current input and output
timing.
2Phase Adjust has total of 32 phases ranging from 0~31. Press the
button repeatedly to adjust the phase setting whenever changing
the source equipment. The device will have the last memory on
the last phase adjustment.
3IN Color Space for selecting input signal of RGB or YPbPr.
4H Position has total of 20 horizontal positions ranging from -10~+10.
5V Position has total of 10 vertical positions ranging from -5~+5.
6Field Invert is to adjust the eld’s even/odd problem, selection Yes
or No to recover the issue when display image appear to be eld
inverted.
7Information displays the input signal, color space, eld invert
setting and rmware version.
8System reset will bring the device back to the factory default
setting
Otros manuales para CM-397M
1
Tabla de contenidos
Otros manuales de Convertidor de medios de CYP
CYP
CYP CP-255I Manual de usuario
CYP
CYP DCT-3HP Manual de usuario
CYP
CYP AU-D3-192 Manual de usuario
CYP
CYP CP-255I Manual de usuario
CYP
CYP CSC-210 Manual de usuario
CYP
CYP CDPS-6H2HFS Manual de usuario
CYP
CYP CVLUX-1080p Manual de usuario
CYP
CYP CPLUS-SDI2H-W CPLUS-SDI2H Manual de usuario
CYP
CYP CLUX-SDI2VS Manual de usuario
CYP
CYP CSC-107 Manual de usuario
CYP
CYP AU-D150 Manual de usuario
CYP
CYP AU-11DM Manual de usuario
CYP
CYP EL-31C-4K22 Manual de usuario
CYP
CYP CDPH-1S Manual de usuario
CYP
CYP CP-295NN Manual de usuario
CYP
CYP AU-11DD Manual de usuario
CYP
CYP DCT-16 Manual de usuario
CYP
CYP CDM-150 Manual de usuario
CYP
CYP CM-388 Manual de usuario
CYP
CYP QU-DV12DL Manual de usuario
