CYP AU-D1D Manual de usuario
AU-D1D
Optical to L/R Stereo Audio Converter
with Dolby® Digital Decoder
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is believed
to be accurate. Cypress Technology assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
Cypress Technology assumes no responsibility for any inaccuracies that
may be contained in this document. Cypress also makes no commitment
to update or to keep current the information contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol are trademarks of Dolby Laboratories.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
RDV1 11/12/12 Preliminary Release
RDV2 30/01/13 ID Printing
v1.01 28/03/13 Updated Format & Diagrams
v1.02 29/04/13 Corrections
v1.03 18/07/13 Removed reference to Power LED
CONTENTS
1. Introduction .........................................1
2. Applications .........................................1
3. Package Contents ................................1
4. System Requirements .........................1
5. Features ................................................2
6. Operation Controls and Functions .....3
6.1 Front Panel ................................................. 3
6.2 Rear Panel ...................................................3
7. Connection Diagram ...........................4
8. Specications .......................................5
9. Acronyms ..............................................5
1
1. INTRODUCTION
The Optical to L/R Stereo Audio Converter (DAC) with Dolby® Digital
Decoder provides the ideal solution for converting an optical digital audio
signal to analogue stereo audio. With audio sampling rate support up to
48 kHz (Dolby Digital)/96 kHz (LPCM) and I/O data rate support up to 24-
bit, it provides high quality sound conversion. The Dolby Digital Decoder
function guarantees that Dolby digital audio signals are downmixed to
analogue stereo without loss of quality.
This unit is perfect for use in digital recording systems, computer audio
systems or digital mixing consoles and can be powered from any spare
USB port allowing it to be used with USB equipped HDTVs, Blu-ray players
or computers without the need for a separate power supply.
2. APPLICATIONS
Converting digital optical audio into analogue stereo
Converting Dolby Digital formatted audio into analogue stereo
HDTV with only digital audio output to analogue amplier input
Improving the digital to analogue conversion quality from any stereo
optical digital audio source
3. PACKAGE CONTENTS
Optical to L/R Stereo Audio Converter with Dolby Digital Decoder
USB Power Cable
Operation Manual
4. SYSTEM REQUIREMENTS
Digital audio source device such as DVD/Blu-ray player or Media player
with an optical output cable and to a device such as an amplier or AV
receiver with analogue stereo input.
2
5. FEATURES
Supports optical digital audio signal input and conversion into
analogue audio signal L/R output
Supports uncompressed digital LPCM stereo or Dolby Digital 5.1CH
audio inputs
Supports LPCM audio sampling rates from 32 to 96 kHz (32, 44.1, 48,
88.2 and 96 kHz)
Supports Dolby Digital audio sampling rates of 32, 44.1 and 48 kHz
Supports Dolby Digital audio downmixing to 2-channel audio
Supports S/PDIF bitstream 24-bit of data for the left and right channels
Compact, elegant design and easy to install
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
R L
LINE OUT
R L
LINE OUT
OPTICAL IN USB 5V
1 32 4
1
Dolby/PCM LED Indicator: When the source audio is encoded with
Dolby Digital the LED will illuminate.
2
OPTICAL IN: Connect the Optical input to an Optical digital audio
source, such as a Games Console, HDTV or Set-top Box.
3
USB 5V: Connect the USB power port to a any powered USB with a
Mini-USB cable.
6.2 Rear Panel
Optical to Analog Audio DecoderOptical to Analog Audio Decoder
R L
LINE OUT
R L
LINE OUT
OPTICAL IN USB 5V
1
1
R/L LINE OUT: Connect the L/R analogue audio output to the input of
your AV Receiver or audio system.
4
7. CONNECTION DIAGRAM
HDTV without
Analogue Audio Output
Digital
Optical
Input
Analogue
Stereo
Output
AV Receiver
(with a spare analogue input)
USB
Power
5
8. SPECIFICATIONS
Input Port 1×Optical
Output Port 1×L/R
Power Supply Powered by USB bus
Output Level 1Vrms ± 0.1
T.H.D+N <0.01%
Frequency Response <0.5 dB
SNR >80 dB
Crosstalk < -110 dB
Dimensions 55 mm (W)×82 mm (D)×22.5 mm (H)
Weight 65 g
Chassis Material Plastic
Silkscreen Color Black
Operating Temperature 0 ˚C ~ 40 ˚C/32 ˚F ~ 104 ˚F
Storage Temperature −20 ˚C~60 ˚C/−4 ˚F~140 ˚F
Relative Humidity 20~90% RH (non-condensing)
Power Consumption 1.68 W
9. ACRONYMS
ACRONYM COMPLETE TERM
DAC Digital to Analogue Converter
Ohm
RCA Audio Connector (Radio Corporation of America)
S/PDIF Sony/Philips Digital Interconnect Format
SNR Signal-to-noise Ratio
THD Total Harmonic Distortion
USB Universal Serial Bus
Tabla de contenidos
Otros manuales de Convertidor de medios de CYP
CYP
CYP CSO-T2 Manual de usuario
CYP
CYP AU-D9 Manual de usuario
CYP
CYP CLUX-DVI2SDIA Manual de usuario
CYP
CYP CLUX-SDI2HCA Manual de usuario
CYP
CYP CSC-5500 Manual de usuario
CYP
CYP CP-1262DI Manual de usuario
CYP
CYP SY-P295 Manual de usuario
CYP
CYP CH-520TXAHS Manual de usuario
CYP
CYP SY-P293 Manual de usuario
CYP
CYP CSLUX-300I Manual de usuario
CYP
CYP CP-298H Manual de usuario
CYP
CYP CPLUS-VPE2DD Manual de instalación
CYP
CYP CLUX-DVI2SDIA Manual de usuario
CYP
CYP CDB-6 Manual de usuario
CYP
CYP DCT-3 Manual de usuario
CYP
CYP CMDPH-1A Manual de usuario
CYP
CYP DCT-4 Manual de usuario
CYP
CYP CDPS-84HB Manual de usuario
CYP
CYP DCT-9 Manual de usuario
CYP
CYP CM-345S Manual de usuario
