CYP CDM-150 Manual de usuario
Video System
Converter
Operation Manual
CDM-150
TABLE OF CONTENTS
1. Introduction.................................................................................1
2. Main Features............................................................................. 1
3. Hardware Description................................................................ 2
3.1 Front Panel.............................................................................2
3.2 Rear Panel............................................................................. 2
4. Connections and Installation.................................................... 3
5. Specifications.............................................................................. 3
1
1. Introduction
The Video System Converter is designed to convert video signal of different TV
systems to NTSC or PAL signal selectable,for the connected display to work
properly. It is a convenient device for users to connect source and display of
different TV systems, with the on-panel H.POS. adjusters which is easy to
fine-tune screen offset caused by display of different type. The installation is
simple, just plug in video cables of input / output and power adapter, then
switch between NTSC and PAL to get the preferable result.
2. Main Features
● Supports digital conversion from NTSC, N4, PAL, PAL M, PAL N, and SECAM to
NTSC/PAL.
● Converts 525 lines to/from 625 lines.
● Converts refresh frequency between 60Hz and 50Hz.
● Provides color bar pattern when there is no signal present.
● System is capable with 8 Mb field memory.
2
3. Hardware Description
The following sections describe the hardware components of this converter
box.
3.1. Front Panel
1. The LED indicator will illuminate when the unit is powered on.
3.2. Rear Panel
1. Video input: Connect to video source using video composite cable.
2. H. POS. Center: To adjust the display to right/left.
3. DC 5V/1A: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
4. NTSC/PAL: Select the output signal. NTSC supports 3.58 format only.
5. Video output: Connect to display using video composite cable.
INPUT OUTPUT
DC5V NTSC
PAL
H. POS.
CENTER
1 32 4 5
1
POWER
CDM-150
Video system converter
3
4. Connections and Installation
5. Specifications
INPUT OUTPUT
DC5V NTSC
PAL
H. POS.
CENTER
DVD Player
NTSC or PAL Video Recorder
PAL
NTSC
or
SECAM
Satellite Receiver
NTSC
or
PAL TV
Camcorder
Set-Top-Box
Input Systems
Output Systems
Input Port
Output Port
Sampling Frequency
Digital Code Bit
Line
Field
Power Supply
Dimensions(mm)
Weight(g)
Chassis Material
Silkscreen Color
Operating Temperature
NTSC, N4, PAL, PAL-M, PAL-N, SECAM
NTSC 3.58, PAL
Video
Video
Y: 13.5MHz
R-Y: 6.75MHz
B-Y: 6.75MHz
R: 8 bits
G: 8 bits
B: 8 bits
525/625
60/50
5V/1A DC (US/EU standards, CE/FCC/UL certified),
Center positive
146(W) x 95(D) x 33(H)
144
Plastic
Milk White
0°C ~ 40°C
2007.9.26 MPM-CDM150
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.
Tabla de contenidos
Otros manuales de Convertidor de medios de CYP
CYP
CYP AU-D4T Manual de usuario
CYP
CYP DCT-4 Manual de usuario
CYP
CYP SY-P291 Manual de usuario
CYP
CYP CLUX-1HLR Manual de usuario
CYP
CYP CH-521RXHS Manual de usuario
CYP
CYP SY-P290 Manual de usuario
CYP
CYP CPCD-3A Manual de usuario
CYP
CYP DCT-3 Manual de usuario
CYP
CYP nT15IX05 Manual de usuario
CYP
CYP CP-251F Manual de usuario
CYP
CYP DCT-3AN Manual de instalación
CYP
CYP CSC-5501 Manual de usuario
CYP
CYP CETH-4HDMI Manual de usuario
CYP
CYP CP-1261HS Manual de usuario
CYP
CYP CUSB-601H Manual de usuario
CYP
CYP CSC-5500 Manual de usuario
CYP
CYP CLUX-SDI2HS Manual de usuario
CYP
CYP CSC-6030HB Manual de usuario
CYP
CYP CP-268S Manual de usuario
CYP
CYP CPT-385AM Manual de usuario
