CYP CP-295NN Manual de usuario

CP-295NN

CV/SV to HDMI Scaler

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VR0 12/08/14 Preliminary Release

VS1 14/11/14 Updated Text/Diagrams

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................4

6.3 OSD Menu.........................................5

7. Connection Diagram ............................ 7

8. Specications ........................................ 8

8.1 Technical Specications .................8

8.2 Audio Specications........................9

9. Acronyms ............................................... 9

1. INTRODUCTION

The Composite Video/S-Video to HDMI Scaler is designed to upscale

the video signal from an analog input source to a digital HDMI output

in a wide-range of HDTV and PC resolutions up to 1080p/WUXGA.

Additionally this unit can also convert a digital/analog audio signal

and then simultaneously output to an HDMI, Optical and 3.5mm Mini-

jack (L/R audio) connections. This unit has a comprehensive OSD

menu that allows the user to select a variety of output resolutions and

make picture adjustments to optimize the image quality.

2. APPLICATIONS

• Display an analog video signal on an HDMI display

• Scale an analog video signal to HD resolutions

• Connect an analog video device, such as a VCR or Laser Disc

player to an HDMI equipped display or AV receiver

3. PACKAGE CONTENTS

• 1×CV/SV to HDMI Scaler

• 1×Composite Video Cable

• 1×Stereo Audio Cable (2×RCA)

• 1×5 V/2.6 A DC Power Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

Analog video source equipment such as a non-HDMI equipped DVD

player or VCR and HDMI equipped display or switching device such

as a matrix or AV receiver.

5. FEATURES

• HDMI, HDCP and DVI compliant

• Supports a wide range of video standards including NTSC, NTSC4,

PAL, PAL-M, PAL-N and SECAM

• Supports upscaling to resolutions of VGA to WUXGA (PC) or 480p to

1080p (HD)

• Automatically detects the display settings of the connected display

and outputs the correct resolution and refresh rate when the NATIVE

output option is selected

• Supports 50/60Hz frame rate conversion

• Supports 3D motion video adaptive, 3D de-interlacing and 3:2/2:2

pull down detection and recovery

• Provides adjustment of contrast, brightness, hue, saturation,

sharpness, RGB (color tone) level and aspect ratio size of the video

output

• Supports OSD selectable stereo analog and digital audio inputs

and simultaneous stereo analog and digital audio outputs to HDMI,

Optical digital audio and analog mini-jack connections

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1SERV.: Reserved for rmware update only.

2HDMI OUTPUT: Connect to an HDMI equipped display or AV

receiver for output of the combined video and audio output.

3OPTICAL OUTPUT: Connect to an amplier or active speakers with

an optical cable for LPCM 2 channel digital audio output.

4AUDIO OUTPUT: Connect to an amplier or active speakers with a

3.5mm mini-jack cable for analog audio output.

5MENU Button: Press this button to enter the OSD (On-Screen

Display) menu and press it again to make a selection.

6+/− Button: Press these buttons to:

When in the OSD menu

• Navigate up/down the OSD menu.

• To adjust the value of a menu selection.

Under normal operation (outside of OSD menu)

• Press the '+' button to switch between CV and SV inputs.

• Press the '+' button together with the 'MENU' button to switch the

output resolution to XGA@60 (1024×768).

• Press the '-' button together with 'MENU' button to switch the

output resolution to 720p@60.

• Press both the '+' and '-' buttons at the same time to reset the

device to the default settings.

6.2 Rear Panel

1CV/SV INPUT: Connect to an analog video source device such as

a DVD/Video player with a composite or S-Video cable or DVD

player with D-sub to RCA adaptor.

2L/R INPUT: Connect to the stereo analog audio output of the

source device with a stereo audio cable for analog audio signal

input.

3OPTICAL INPUT: Connect to the optical digital audio output of the

source device with an optical cable for digital audio signal input.

4DC 5V: Connect the 5V DC power supply to the unit and plug the

adaptor into an AC outlet.

5Power LED: This LED will illuminate once the unit is connected to an

active power supply.

6.3 OSD Menu

MAIN MENU 1ST LAYER 2ND LAYER

PICTURE

SETTING

CONTRAST 0~100 (50)

BRIGHTNESS 0~100 (50)

EXIT

FINETUNE HUE 0~100 (50)

SATURATION 0~100 (50)

SHARPNESS 0~100 (50)

NR OFF, LOW, MIDDLE, HIGH (OFF)

EXIT

COLOR

SETTING

RED 0~100 (50)

GREEN 0~100 (50)

BLUE 0~100 (50)

EXIT

OUTPUT

SETTING

SIZE FULL, OVERSCAN, UNDERSCAN,

LETTER BOX, PANSCAN, ASPECT

(FULL)

RESOLUTION 640×480@60, 800×600@60,

1024×768@60, 1280×1024@60,

1400×1050@60,

1600×1200@60, 1280×800@60,

1440×900@60, 1680×1050@60,

1920×1200@60RB, 1600×900@60,

480p, 576p, 720p@50, 720p@60,

1080i@50, 1080i@60, 1080p@50,

1080p@60

EXIT

Tabla de contenidos

Otros manuales de Convertidor de medios de CYP

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario

Expert

Expert EX-9543 Manual de usuario