CYP PU-1103 Manual de usuario

OPERATION MANUAL

PU-1103

v1.3 HDMI over CAT6 Extender

Set

PU-1103_Manual-EN.indd 1 03/05/2011 12:38:37

Table of Contents

1. Introduction 1

2. Features 1

3. Package Contents 1

4. Operation Controls and Functions 2

4.1 Front Panel Diagram 2

4.2 Rear Panel Diagram 3

5. Connection Diagram 4

6. Specications 4

PU-1103_Manual-EN.indd 2 03/05/2011 12:38:51

Page 1

1. Introduction

A dedicated extender for extending the CAT6 cables used with the PU-103, PU-1103,

and PU-1106 HDMI over CAT6 Extender Sets. This great device will extend your

cabling up to 25 metres either side of the repeater, allowing IR pass-through, and

can be cascaded.

2. Features

• v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant.

• HDMI over CAT6 Repeater.

• Resolutions supported: PC - VGA to WXGA; HDTV - 480i to 1080p plus

1080p24fps.

• High Denition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-HD

Master Audio plus LPCM.

• Compatible with CAT-5E and CAT-6 cables. CAT-6 is recommended for better

performance.

• Supports CEC functions & Deep Colour (10 & 12 bit)

• Supports Infra Red control signals throughput when in use with PUMA product

which enable IR control.

• Equalises and recovers incoming TMDS data before re-transmitting to ensure

optimum signal quality.

• Supports 3D signals

3. Package Contents

• CAT6 to CAT6 Repeater.

• Operation Manual.

PU-1103_Manual-EN.indd 1 03/05/2011 12:38:51

Page 2

4. Operation Controls and Functions

4.1 Front Panel

1. HDMI input: Connect the HDMI input port to the HDMI or DVI output of your

source equipment such as DVD player or set-top-box.

2. Video input: Connect the video input to the video output of the transmitter unit

using CAT-6 cable.

3. DDC input: Connect the DDC input to the DDC output of the transmitter unit using

CAT-6 cable.

DC 5V

POWER

HDMI INPUT

DDC

CAT6 INPUT

VIDEO

1 2 3

PU-1103_Manual-EN.indd 2 03/05/2011 12:38:52

Page 3

4.2 Rear Panel

1. DDC output: Connect the DDC output to the DDC input of the receiver unit using

CAT-6 cable.

2. Video output: Connect the video output to the video input of the receiver unit

using CAT-6 cable.

3. HDMI output: Connect the HDMI output port to the HDMI or DVI input of your

display.

VIDEODDC

CAT6 OUTPUT

POWER

HDMI OUTPUT

1 2 3

PU-1103_Manual-EN.indd 3 03/05/2011 12:38:53

Page 4

5. Connection Diagram

Input Port

(Transmitter) 1 x HDMI female port

(Receiver) 1 x CAT5e/6 for Video, 1 x CAT5e/6 for

DDC

Output Port (Transmitter) 1 x CAT5e/6 for Video, 1 x CAT5e/6

for DDC (Receiver) 1 x HDMI female port

Power Supply 1 x 5V/2.6A DC (US/EU standards, CE/FCC/UL

certied)

Dimensions (mm) 50(W) x 72(D) x 23(H)

Weight (g) 380

Chassis Material Aluminium

Silk Skin Colour Black

Operating Temperature Operating from 0°C ~ 40°C

6. Specications

PU-1103_Manual-EN.indd 4 03/05/2011 12:38:57

Notes:

PU-1103_Manual-EN.indd 5 03/05/2011 12:38:57

www.cypeurope.com

PU-1103_Manual-EN.indd 6 03/05/2011 12:39:11

Otros manuales para PU-1103

1

Tabla de contenidos

Otros manuales de Extensor de CYP

Manuales populares de Extensor de otras marcas

SY

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario