CYP CPRO-2A Manual de usuario

CPRO-2/4/8A

HDMI 1 by 2 /1 by 4/ 1 by 8 Splitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.0 October 2012

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 17/09/12 Preliminary Release

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 1

6. Operation Controls and Functions....... 2

6.1 Front Panel ........................................2

6.2 Rear Panel.........................................3

7. Connection Diagram ............................ 4

8. Specications ........................................ 5

9. Acronyms ............................................... 6

1. INTRODUCTION

Cypress CPRO-2/4/8A is a 1 by 2/4/8 HDMI splitter which sends

a Hi-Def A/V source to up to 2/4/8 HDTV displays simultaneously

without any quality or resolution loss. It support 4Kx2K timing, 3D,

3Gbps bandwidth, 12-bit Deep Color, Hi-Def lossless audio and

other features dened by HDMI specications.

2. APPLICATIONS

• Simultaneous display on HDMI source on 2/4/8 TVs

• Showroom display

• Education demo

• Commercial usage

• Home entertainment

3. PACKAGE CONTENTS

• 1 x 2 / 1 x 4 / 1 x 8 HDMI Splitter

• 5V DC Power Supply Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

• Source equipment with HDMI output connector

• Display TV/Monitor with HDMI input connector

5. FEATURES

• Supports single HDMI input with multi-HDMI outputs

• Supports HDTV resolution up to 4Kx2K

• Supports 7.1-CH of LPCM, Dolby TrueHD, and DTS-HD Master Audio.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

SERVICE POWER SYNC 1 2345678

LINK

CPRO-8A

4KX2K SPLITTER

4321

1SERVICE

This port is reserve for factory service only.

2POWER LED

The device will be power on automatically once the power supply

is connected to the device and the LED will illuminate.

3SYNC LED

This LED will illuminate when the input source is connected with

signal sending.

4LINK 1~8 LEDs

These LEDs will illuminate when the HDMI outputs are connected to

the display with signal display on screen.

6.2 Rear Panel

87654321

STD TV

HDMI IN

EDID

HDMI OUT

DC 5V

1 2 3 4

1HDMI IN

Connect this port to source equipment such as DVD/Blu-ray player

with HDMI cable.

2HDMI OUT 1~8

Connect these ports to display TVs/monitors with HDMI cable.

3EDID STD/TV

The default factory setting is on TV, leave as it is when the display is

properly. The unit will detect the 1st HDMI output’s EDID and send

out the signal accordingly to other 7 output ports. Switch to STD

to use build-in EDID if the display has problem, STD EDID’s video at

1080p@60 and video at LPCM 2CH.

4DC 5V

Plug the 5V DC power supply into the splitter and connect the

adaptor to AC wall outlet.

7. CONNECTION DIAGRAM

87654321

STD TV

HDMI IN

EDID

HDMI OUT

DC 5V

HDMI

HDMIHDMI HDMI

HDMI

HDMI HDMI

HDMI

3D TV/Display

Blu-ray

PS3 player

3D TV/Display 3D TV/Display

3D TV/Display

3D TV/Display 3D TV/Display

3D TV/Display

8. SPECIFICATIONS

Video Bandwidth Up to 300MHz/10.2Gbps

Input port 1x HDMI (Female type)

1xUSB (Service only)

Output port 2 /4/8x HDMI (Female type)

Output Resolution 480i ~1080p 50/60, 1080p24/50/60,

VGA~UXGA, 4Kx2K

Power Supply 5V/3A DC (US/EU standards,

CE/FCC/UL certied)

ESD Protection Human Body model:

+/- 8kV (air-gap discharge)

+/- 4kV (contact discharge)

Dimensions

103mm(W) x 155mm(D) x 25mm(H)/2A

142mm(W) x 105mm(D) x 38mm(H)/4A

240mm(W) x 114mm(D) x 48mm(H)/8A

Weight 298/2A, 378/4A, 806/8A

Chassis Material Metal

Silkscreen Color Black

Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F

Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F

Relative Humidity 20~90% RH (non-condensing)

Power Consumption w/2A, w/4A, w/8A

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cables y conectores de CYP

Manuales populares de Cables y conectores de otras marcas

Philips

Philips SWA6310 Manual de usuario

StarTech.com

StarTech.com CRJ4550PK Manual de usuario

Nohau

Nohau EMUL-IP2K-PC Manual de usuario

Foxun

Foxun SX-SP144E-HD4K2K Manual de usuario

Philips

Philips SWA3305W Manual de usuario

opticis

opticis Stretch DVIM1-1P0x Manual de usuario

Volkswagen

Volkswagen VAS 6558A Manual de usuario

NEXIBO

NEXIBO N-13 Manual de usuario

Allen-Bradley

Allen-Bradley 1784-u2dhp Manual de usuario

Global Caché

Global Caché Flex Link Blaster Manual de usuario

Hauppauge

Hauppauge USB-Live2 Manual de usuario

Fenix

Fenix MPSV 15 Manual de usuario

BEGA

BEGA 71 085 Manual de usuario

Tesla

Tesla HPWC Manual de usuario

GAMERON

GAMERON LUXURY TV CABLE Manual de usuario

molex

molex Milli-Grid Dual row 87568 Series Manual de usuario

Burndy

Burndy Continental Industries thermOweld CRE-7 Manual de usuario

Chauvet DJ

Chauvet DJ Data Stream 8 Manual de usuario