CYP CLUX-12CEC Manual de usuario
CLUX-12CEC
1x2 HDMI 1.3 Splitter
with CEC Function
Operation Manual
CLUX-12CEC
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2009 by Cypress Technology.
All Rights Reserved.
Version 1.0 December 2009
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
V1 20091227 Preliminary Release
Table of Contents
1
1
1
1
2
3
4
4
5
6
7
1. Introduction…………………………………………………........……….
2. Applications……………………..…………………………................….
3. Package Contents…………………………......…………….............…
4. System Requirements……...…………………..….…………........…….
5. Features…………………………………………….......……........………
6. Specications..………………………………………...........………...….
7. Operation Controls and Functions………………...……........………
7.1 Front Panel ...............................................................................
7.2 Rear Panel ………………………………………….........….….…
8. Connection and Installation …….…………………..........…..…..…...
9. Acronyms …….…………………..........…..…..….................................
1. Introduction
This HDMI v1.3 Distribution Amplifier is an incredibly useful solution for your
HDMI signal distributing needs. From a single HDMI source you can transfer
Deep Color (10-bit and 12-bit) video and a new lossless compressed (Dolby
TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio with high
bandwidth up to 225MHz (6.75Gbps) to two HDMI outputs. Besides splitting
and distributing, it also does signal amplification and equalization, providing
high I/O performance on both audio and video.
2. Applications
Simultaneous display one HDMI source on two TVs
Show room display control
Educational demo
Installation usage
3. Package Contents
1 x 2 HDMI 1.3 Splitter
5V DC Power supply adaptor
Operation Manual
4. System Requirements
Input source equipments with HDMI output connector(s)
Output displays with HDMI input connector(s)
1
5. Features
HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver .
Deep color video up to 12bit, 1080p@(24/60)Hz.
Simultaneously displays one HDMI source onto eight HDMI displays.
HDCP keysets allow each output to work independently when
connecting to an HDMI display.
Allows a single HDMI source to be shown on two displays without any
signal loss.
Supports DVI source/display via HDMI to/from DVI adaptor cable.
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission (32-192kHz Fs sample rate).
Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p.
HDMI cable distance testing showed that with 1080p/8bits resolution: the
Input/Output source can reach up to 10/10 meters away, and at
1080p/12bits the I/O source can reach up to 6/10 meters.
Note:
A. Cable tested with CAT-6E /23AWG/ using cables of another type may
result in a different operating distance.
B. Cable distance test included the following: PS3 120G and 37" Samsung
12-bit LCD TV.
C. Figures provided in this manual are reference figures only, actual
figures may depend on source and display use with cable
specification.
Supports EDID bypass, xvYCC and CEC bypass.
CEC function support includes one touch play & record, timer
programming, menu language, deck & device menu control, OSD
display, device OSD transfer, remote control pass through, system audio
control and system standby
System standby will only be actived when the last TV is switched to
standby
2
Frequency Bandwidth 2.25Gbps (single link)
Input Port 1x HDMI female port (Type A connector)
Output Ports 2x HDMI female ports (signal link)
HDMI Cable In 1080p 8-bit (10M), 12-bit (15M)
HDMI Cable Out 1080p 8-bit (6M), 12-bit (15M)
ESD Protection Human body model: ±10kV (air-gap discharge)
±6kV (contact discharge)
PCB Stack - up 4-layer board impedance control – differential 100Ω
– Single 50Ω
Input TMDS Signal 1.2 Volts (peak-to-peak)
Input DDC Signal 5 Volts (peak-to-peak, TTL)
HDMI Output Resolution 480i ~ 1080p, 1080p24, VGA ~ UXGA
Power Supply 5VDC/1A (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 145(W) x 90(D) x 32(H)
Weight(g) 160
Chassis Material Plastic
Silkscreen Color Black
Operating Temperature 0°C ~ 40°C / 32°F~ 104°F
Storage Temperature -20°C ~60°C / -4°F ~ 140°F
Relative Humidity 20% ~ 90% RH (non-condensing)
Power Consumption 3.2W (max)
6. Specications
3
7. Operation Controls and Functions
7.1 Front Panel
① ② ③
①Sync LED: When an HDMI source is connected, this LED will switch on
once the splitter has established a Link with the source.
②Power LED Indicator: The LED Will turn on when power is on.
③Power Switch: Press this button to turn power on and off.
7.2 Rear Panel
② ③①
①HDMI Input: This slot is where you connect the output port of your HDMI/
DVI source (i.e., DVD, set-top box) using an HDMI/HDMI to DVI adaptor
cable.
②HDMI output 1~2: These slots connect to the HDMI displays through
the splittler, using HDMI cables. If more than one output is connected,
all corresponding HDMI outputs will simultaneously display an identical
video signal.
③Power: This slot is where you insert the 5V DC power supply after its
plugged into an AC outlet.
4
8. Connection and Installation
DVD
LCD TVLCD TV
5
Acronyms A
Acronym Complete Term
CEC Consumer Electronics Control
DTS Digital Theater Systems
DVI Digital Visual Interface
EDID Extended Display Identification Data
HDCP High-Bandwidth Digital Content Protection
HDMI High-Definition Multimedia Interface
PC Personal Computer
PCB Printed Circuit Board
SYNC Synchronize
TMDS Transition Minimized Differential Signaling
TTL Transistor–transistor logic
UXGA Ultra Extended Graphics Array
VGA Video Graphics Array
6
Tabla de contenidos
Otros manuales de Cables y conectores de CYP
CYP
CYP CHDBT-1H3CE Manual de usuario
CYP
CYP CLUX-14EP Manual de usuario
CYP
CYP CPLUS-V4E Manual de usuario
CYP
CYP CPRO-4ER Manual de usuario
CYP
CYP DT-12 Manual de usuario
CYP
CYP CPRO-16E Manual de usuario
CYP
CYP CLUX-18S Manual de usuario
CYP
CYP CDVI-2DDS Manual de usuario
CYP
CYP CLUX-4M Manual de usuario
CYP
CYP AU-D12 Manual de usuario
CYP
CYP CLUX-18W Manual de usuario
CYP
CYP QU-18WE Manual de usuario
CYP
CYP CDVI-4H Manual de usuario
CYP
CYP CPLUS-V2E Manual de usuario
CYP
CYP CPRO-U8T Manual de usuario
CYP
CYP PU-1H3HBTL Manual de usuario
CYP
CYP CPRO-2A Manual de usuario
CYP
CYP CDPS-UA1H4HS Manual de usuario
CYP
CYP CDPS-4S2HSS Manual de usuario
CYP
CYP CPRO-2E Manual de usuario
