CYP CPLUS-V4E Manual de usuario

CPLUS-V4E

1 by 4 6G HDMI Splitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

RDV1 02/07/15 Preliminary release

RDV2 17/03/16 Add HDMI Cable Spec.

31/05/16 Add texts.

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................4

7. Connection Diagram ............................ 5

8. Specications ........................................ 6

8.1 Technical Specications .................6

8.2 Supported Resolutions.....................7

9. Acronyms ............................................... 8

1. INTRODUCTION

The 1 by 4 HDMI Splitter with HDCP 2.2 is an advanced solution

for splitting a single HDMI input to 4 HDMI outputs. It provides high

performance audio and video output up to 4K2K@60Hz (YUV444)

resolution and is capable of provide high end of audio and video

performance. This unit also support HDR (High Dynamic Range

Imaging) function, which allows giving more luminance radiance

contrasting and colourful pictures for better experience. It supports

high resolution digital audio formats such as LPCM 7.1CH, Dolby

TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio,

audio sampling rate up to 192kHz. There are input and outputs

indications on panel, which will illuminate when detected, system

reset function allows the unit to set the TV to it's default HDMI input.

2. APPLICATIONS

• Entertainment Room / Home Theater

• Lecture Room/Hall Presentation

• Show Room/Demo Room

• Public Commercial Display

3. PACKAGE CONTENTS

• 1×1 by 4 HDMI splitter

• 1×5 V/2.6 A DC Power Adaptor

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

Input source equipments such as Blu-ray/DVD/PS3/PS4 player or Set-

Top-Box or any 6G with HDCP2.2 source. And output with 6G HDMI TV/

Display and or audio amplier with connection cables.

Note: To achieve 6G performance will need to collocation with

particular HDMI cable to get the better quality.

5. FEATURES

• 4Kx2K 6G supported, HDCP 2.2, HDMI2.0 and DVI 1.0 compliant.

• System Reset function supported (CEC active source command)

• Displays any of 1 Ultra High-Denition sources on 4 UHDTV displays

simultaneously

• 3D pass-Through

• Supports UHDTV resolutions up to 4Kx2K (3840x2160@24/25/30/50/60

& 4096x2160 @24/25/30/60)

• Supports LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH,

Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio

• HDCP 2.2 and HDCP1.4 compliant

• Input port EDID support Standard and TV mode

Note: When displaying HDMI 4Kx2K signal, equivalent source signal,

output display and HDMI cables are required in order to secure the

best image display.

• HDR Pass Through supported.

Note: To active HDR function, input source and output device

should also equip and support HDR function.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

SYNC

HDCP

IN OUT 1 OUT 2 OUT 3 OUT 4

EDID

STDTV

SYS-RST

ON OFF

12 4 6

7 8

1POWER: This LED will illuminate when the device is connected to an

active power supply.

26G/3G: When input source bandwidth is 6G, the 6G LED will

illuminate, when input source detect as 3G, the 3G LED will

illuminate.

3IN SYNC: When input detected, the LED will illuminate, the LED will

icker when detected abnormal, for example, when source signal

not stabled, and when input is not connected, the LED light will off.

4IN HDCP: When Input HDCP has been detected, the LED will

illuminate, the LED will icker when HDCP abnormal, for example

when HDCP version is not supported, and when no HDCP

detected, the LED will off.

5OUT 1~4 SYNC: When output detected, the LED will illuminate,

the LED will icker when detected abnormal, for example, when

output connected but the output sense is off, and when output is

not connected, the LED will off.

6OUT1~4 HDCP: When output HDCP working, the LED will illuminate,

the LED light icker when HDCP abnormal, for example, when

HDCP version is not supported, and when no HDCP detected, the

LED will off.

7EDID: Switch the dip could choose EDID mode to Standard (STD)

mode or TV mode. When on TV mode, the unit will automatically

detect and store output 1 sink EDID data, if switch to STD mode,

the unit will set to standard 1080p and PCM 2 channel.

8SYS-RST: Switch the dip from off to on, the unit will trigger TV to it’s

HDMI input1 immediately, when dip stays in on, the unit will trigger

cycle in every 8~10 minutes. (*The purpose of this function is to

guarantee output display the corresponding image, for example,

at the display user use may switch to different HDMI input or other

sources connected to display and this reset function will force the

display to switch back to the HDMI input1 which TV shall support

CEC.)

6.2 Rear Panel

INPUT 1234

OUTPUT

SERVICE

DC 5V

13 4

1INPUT: Connect with HDMI source equipment such as DVD/Blue-

ray players and or PC/Laptop devices.

2OUTPUT 1~4: Connect to HDMI TV / display or HD amplier for

output display.

3SERVICE: This is reserved for rmware update use only.

4DC 5V: Connect the adapter which included in the package and

connect to AC wall outlet for power supply.

7. CONNECTION DIAGRAM

INPUT 1234

OUTPUT

SERVICE

DC 5V

DVD or Blu-ray Player

UHDTV

Projector

Power

Supply

Simultaneous

HDMI Outputs

HDMI

Input

Tabla de contenidos

Otros manuales de Cables y conectores de CYP

Manuales populares de Cables y conectores de otras marcas

Philips

Philips SWA6310 Manual de usuario

StarTech.com

StarTech.com CRJ4550PK Manual de usuario

Nohau

Nohau EMUL-IP2K-PC Manual de usuario

Foxun

Foxun SX-SP144E-HD4K2K Manual de usuario

Philips

Philips SWA3305W Manual de usuario

opticis

opticis Stretch DVIM1-1P0x Manual de usuario

Volkswagen

Volkswagen VAS 6558A Manual de usuario

NEXIBO

NEXIBO N-13 Manual de usuario

Allen-Bradley

Allen-Bradley 1784-u2dhp Manual de usuario

Global Caché

Global Caché Flex Link Blaster Manual de usuario

Hauppauge

Hauppauge USB-Live2 Manual de usuario

Fenix

Fenix MPSV 15 Manual de usuario

BEGA

BEGA 71 085 Manual de usuario

Tesla

Tesla HPWC Manual de usuario

GAMERON

GAMERON LUXURY TV CABLE Manual de usuario

molex

molex Milli-Grid Dual row 87568 Series Manual de usuario

Burndy

Burndy Continental Industries thermOweld CRE-7 Manual de usuario

Chauvet DJ

Chauvet DJ Data Stream 8 Manual de usuario