CYP QU-DP13EX Manual de usuario
QU-DP13EX
1 to 3 DisplayPort Distribution Amp
for Desktop Extending
OPERATION MANUAL
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
V1 20100317 Preliminary Release
Table of Contents
1
1
1
1
1
2
3
3
3
4
5
6
7
1. Introduction …………………………………………………......……….
2. Applications …………………..………………………….................….
3. Package Contents ………………..………......……………............…
4. System Requirements ……...………………..…..…………........…….
5. Features …………………………………….…….......……........………
6. Specications ..……………………………………...........………...….
7. Operation Controls and Functions …………….....……........………
7.1 Front & Right Panel ......................................................................
7.2 Rear Panel ………….....……………………………….........…….…
7.3 Top Panel………….....……………………………….........…….…..
8. Timing tables for monitor ……...............................…………...……...
9. Connection and Installation …….…..……………..........…..…..…...
10. Acronyms …….……………...........................……..........…..…..…....
1. Introduction
2. Applications
Gaming
3. Package Contents
1 by 3 DisplayPort Splitter
3.3V DC Power Supply
Operation Manual
4. System Requirements
Input source equipment such as a PC or any DisplayPort output device with a
DisplayPort connection cable.
Output display such as a PC monitor or any DisplayPort input display with
DisplayPort connection cable.
5. Features
Supports DisplayPort v1.1a, VESA DDM Standard,
HDCP v1.3 and EDID v1.4
Supports link rates of 2.7Gbps (HBR) and 1.62Gbps (RBR) from the
source.
Fully HD compatible and provides full display performance with zero lag
and no display application limitations
Does not require software updates
Quality Lab (WHQL) testing/quali cation
Supports output resolutions up to 1920 x 1200
Works with any desktop and notebook computer which have a DisplayPort
output port
Provides exceptional Secured Content Protection with HDCP 1.3 for digital
content including video and audio
Plug and Play
1
The QU-DP13EX is a device for extending and splitting DisplayPort signals. It is
able to extend an image onto 2 or 3 displays which is perfect for multi-tasking. It
can also split an image so the same image is repeated on up to 3 connected
displays. This 1 by 3 DisplayPort Extender Splitter allows users to enjoy images or
video in HD resolution up to 1920 x 1200 on multiple monitors from a single digital
output port.
Output Resolution 1920 x 1200 / 1920 x 1024
Input port 1 x DisplayPort
Output ports 3 x DisplayPort
Power Supply 3.3V / 1.5A DC (US/EU standards, CE/FCC/UL certied)
ESD Protection Human body model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions(mm) 100 (W) x 70 (D) x 20 (H)
Weight(g) 90
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C~60°C / -4°F ~ 140°F
Power Consumption 3W
Relative Humidity 20~90% RH (non-condensing)
6. Specications
2
7. Operation Controls and Functions
7.1 Front & Right Panel
DP OUT1
11
DP OUT3 DP OUT2
① DP OUT 1~3: Connect these slots with the output displays Display port
input port in order to send a signal.
Note: It is suggested to use the same type/model of display in order
to get the optimal image quality. When the input source’s timing is
matched with the output display’s timing, the device will rst
extend the image according to the numbers of the output
connected. If the input sources timing does not match with output
display’s timing the device will then split the signal to match the
number of the connected display to show an identical image.
(Detail information please refer to section 8. Timing table for
monitors).
7.2 Right Panel
1 2 3
OFF ON
DC 3.3V
DP IN
POWER
① On/off switch: Push this switch to turn the device on or off. The green LED
will turn on when the device is switched on.
② DC 3.3V: This slot is where you plug the 3.3V DC power supply into the
unit and connect the adaptor to an AC outlet.
③ DP IN: This slot is where you connect the input source equipment such as
a PC or any output device that has a DisplayPort.
Output Resolution 1920 x 1200 / 1920 x 1024
Input port 1 x DisplayPort
Output ports 3 x DisplayPort
Power Supply 3.3V / 1.5A DC (US/EU standards, CE/FCC/UL certied)
ESD Protection Human body model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions(mm) 100 (W) x 70 (D) x 20 (H)
Weight(g) 90
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C~60°C / -4°F ~ 140°F
Power Consumption 3W
Relative Humidity 20~90% RH (non-condensing)
3
7.3 Top Panel
POWER
LINK
3 2 1
OUT
3
21
① LINK LED: The green LED will turn on when the input source device is
connected.
② POWER LED: The green LED will switch on when the device is powered on.
③ OUT 1~3 LED: The green LED will turn on when the output port is
connected with the output display.
4
8. Timing tables for monitor
The 1 by 3 DisplayPort splitter is a smart device with a built in feature that can
dene which and how many monitors are connected and can transmit the
proper signal for the display. Below is the expanded timing list which is sup-
ported by the device.
Two monitors mode
From PC To monitor Vertical refresh rate (Hz)
3840 x 1200 1920 x 1200 60
2560 x 1024 1280 x 1024 60
2048 x 768 1024 x 768 60
3360 x 1050 * 1 1680 x 1050 60
3200 x 1200 * 1 1600 x 1200 60
2880 x 900 * 1 1440 x 900 60
1600 x 600 * 1 800 x 600 60
1280 x 480 * 1 640 x 480 60
2800 x 1050 * 1 1400 x 1050 60
Three monitors mode
From PC To monitor Vertical refresh rate (Hz)
3840 x 800 1280 x 800 60
3840 x 1024 1280 x 1024 60
3072 x 768 1024 x 768 60
2400 x 600 * 1 800 x 600 60
1920 x 480 * 1 640 x 480 60
4080 x 768 * 1, * 2 1360 x768 60
3840 x 720 * 1 1280 x 720 60
2160 x 480 * 1 720 x 480 60
3840 x 960 * 1 1280 x 960 60
Note:
*1. The timing is listed out in EDID extension block. Some old GPU driver
may not support it.
*2. The total horizontal pixel include the active area and blank area is
large than 4096, some GPU driver may not support the timing.
5
9. Connection and Installation
6
Dell PC/Notebook
Dell Monitor
Dell Monitor
or
Dell Monitor
Dell Monitor
Dell Monitor
Dell Monitor
Acronyms A
Acronym Complete Term
EDID Extended display identication data
GPU Graphics Processing Unit
HDCP High-bandwidth Digital Content Protection
7
Tabla de contenidos
Otros manuales de Amplificador de CYP
CYP
CYP PRO-3GSDI14 Manual de usuario
CYP
CYP QU-DV12 Manual de usuario
CYP
CYP QU-12S Manual de usuario
CYP
CYP QU-210S v1.3 Manual de usuario
CYP
CYP AU-A50 Manual de usuario
CYP
CYP PU-Q1C4H Manual de usuario
CYP
CYP CPRO-UHH Manual de usuario
CYP
CYP CDB-6HP Manual de usuario
CYP
CYP QU-16E-4K Manual de usuario
CYP
CYP QU-128 Manual de usuario
CYP
CYP QU-210S Manual de usuario
CYP
CYP CPRO-UHH Manual de usuario
CYP
CYP CDB-6HP Manual de usuario
CYP
CYP QU-16E Manual de usuario
CYP
CYP CS-PM Manual de usuario
CYP
CYP CLUX-3D12S1A Manual de usuario
CYP
CYP DCT-23 Manual de usuario
CYP
CYP QU-12D Manual de usuario
CYP
CYP VOPEX-HDMI-2-LC Manual de usuario
CYP
CYP QU-12S-4K22 Manual de usuario
