CYP CLUX-3D12S1A Manual de usuario
CLUX-3D12S1A
1 × 2 HDMI Splitter with 3D Audio to Amplier
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VS1 23/02/12 First Release
VR2 02/04/12 Add HDMI Cable Distance
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
7. Connection Diagram ............................ 5
8. Specications ........................................ 6
9. Acronyms ............................................... 7
1
1. INTRODUCTION
The 1 x 2 HDMI Splitter with audio is fully compliant with HDMI and
allows the output from any HDMI equipped device to be split and
allow connection to up to two HDTV displays e.g. an LCD TV and a
projector in the same room. The third HDMI output is an audio with
blue screen output, which means it can be connected to an AV
Receiver that does not support 3D signal.
2. APPLICATIONS
• Showroom environment
• Education demo
• Installation usage
• Home entertainment
3. PACKAGE CONTENTS
• 1 x 2 HDMI Splitter with audio
• 5 V/1 A DC power supply adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment with HDMI ouputs and HDMI equipped
displays and/or AV Receivers.
2
5. FEATURES
• HDMI, HDCP1.1 and DVI 1.0 compliant Receiver
• Deep Color video up to 12-bit, 1080p@24/60 Hz
• One HDMI source to connect up to two HDMI displays
simultaneously
• One audio-only HDMI output connected to AVR
• Splits a HDMI source to two outputs without signal loss
• Supports DVI source and DVI display by using HDMI to/from DVI
adaptor cable
• Supports LPCM 7.1CH, Dolby Digital and Dolby Digital Plus Audio
transmission (32–192 kHz Fs sample rate)
• Supports a wide range of PC and HDTV resolutions from VGA to
WUXGA and 480i to 1080p
• HDMI cable distance test with 1080p/8-bit or 12-bit resolution, the
Input/Output distance can run up to 15 meters
• Supports EDID functionality. This device will detect the video's EDID
information based on HDMI OUT 1 and the audio's EDID based
on HDMI OUT 3.
Note: If both HDMI OUT 1 & HDMI OUT 2 are connected and HDMI
OUT 1 is unplugged, the device will retain the EDID information for
that device.
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
HDMI OUT 1 HDMI OUT 2HDMI OUT 3
AUDIO
CLUX-3D12S1A HDMI SPLITTER
1 2
1
HDMI OUT 1 & 2
Connect each of the output ports to a HDMI equipped video
display such as TV or projector. HDMI OUT 1 is the master video
port and the device will send the video content according to that
connected display's EDID information. If more than one output is
connected, both HDMI OUT 1 and HDMI OUT 2 output identical
video signals simultaneously based on the EDID information of the
display connected to HDMI OUT 1.
2
HDMI OUT 3
Connect the HDMI audio output port to the AV Receiver. HDMI
OUT 3 is the master audio port and the device will send the audio
content according to the connected device's EDID information
to all HDMI outputs. Meanwhile, the display will show a blank BLUE
screen.
Note: A master port will replicate the highest resolution settings of
the connected device. Any device connected to a non-master
port that does not meet the master device's EDID settings there
may be no output from that port. For example, when the device
connected to HDMI OUT 3 supports 7.1CH audio but OUT 1 & 2
supports only 2CH, then there will be no audio output from the
HDMI OUT 1 and HDMI OUT 2 ports.
Similarly, when a 3D capable display is connected to HDMI OUT 1
and a non-3D capable display is connected to HDMI OUT 2 there
may be no video displayed on the device connected to HDMI
OUT 2 when 3D video is playing.
4
6.2 Rear Panel
HDMI IN
3D DC 5V
POWER
1 2 3
1
HDMI IN
Connect the HDMI or DVI output of your source equipment such as
3D Blu-ray player or set-top box.
2
POWER/3D INDICATOR
When the system is ON the RED LED will illuminate when the system
detects a 3D formatted video signal the GREEN LED will illuminate.
3
DC POWER JACK
Plug the DC 5V power supply into the splitter and connect the
adaptor to AC wall outlet.
5
7. CONNECTION DIAGRAM
HDMI OUT 1 HDMI OUT 2HDMI OUT 3
AUDIO
CLUX-3D12S1A HDMI SPLITTER
HDMI IN
3D DC 5V
POWER
Rear
Front
AVR with HDMI Input
(Non-3D Ready)
Projector
3D DVD or Blu-ray Player
Power
Supply
HDMI
HDMI
3D Ready TV
In this example, when the input signal is of 3D format, only HDMI OUT
1 will have picture, while HDMI OUT 2 won't because the projector is
non 3D-ready. When the input signal is of 2D format, both HDMI output
port 1 and 2 will have picture.
Tabla de contenidos
Otros manuales de Amplificador de CYP
CYP
CYP QU-14S Manual de usuario
CYP
CYP QU-12S Manual de usuario
CYP
CYP CPRO-UHH Manual de usuario
CYP
CYP QU-210S Manual de usuario
CYP
CYP CMPRO-4H2H Manual de usuario
CYP
CYP QU-28S-4K22 Manual de usuario
CYP
CYP CPLUS-V4H4HP Manual de usuario
CYP
CYP QU-12S Manual de usuario
CYP
CYP QU-4M Manual de usuario
CYP
CYP QU-18S Manual de usuario
CYP
CYP AU-A300 Manual de usuario
CYP
CYP DCT-23 Manual de usuario
CYP
CYP DCT-23 Manual de usuario
CYP
CYP QU-8-4K22 Manual de usuario
CYP
CYP CS-PM Manual de usuario
CYP
CYP QU-110S-4K22 Manual de instalación
CYP
CYP QU-12D Manual de usuario
CYP
CYP QU-16E-4K Manual de usuario
CYP
CYP CHDD-3 Manual de usuario
CYP
CYP DCT-23 Manual de usuario
