Creality CR-10 S5 Manual de usuario

The CR-10 S5 is one of the biggest available consumer printers. If you decide to

buy one, make sure to clear up some space in your toolshed or lab. Also, make

sure to include some additional space for the control box.

Although being marketed as a 3D printer kit, the Creality CR-10 S5 comes mostly

pre-assembled. All you have to do is to mount the Z-axis to the base, connect the

cables and you’re ready to 3D print. This shouldn’t take longer than 30 to 60

minutes.

In the box, you will find these parts:

2 pre-assembled frames

tools for the assembly of the Creality CR-10 S5

some spare parts

Spatula for removing the print from the glass bed

Needle for cleaning of clogged nozzles

Teflon tube

PLA filament spool

filament holder

UBS cable

AC cable

Filament Runout Detection Sensor: A feature found pretty commonly today.

You run the 3D printed sensor between the spool and the hotend. If the filament

runs out, the mechanical sensor picks up the information and pauses the print, so

you can resume later. This is one of the major improvements of the Creality CR-

10 S5 3D Printer. And rest assured, it will come in handy you’ll start printing

bigger models.

External control board: As with Creality CR-10, the power brick, the

RAMboard, and controls are located in a separate external “brick”. The spool

holder is mounted on top. The heated bed now also uses a MOSFET for

electrical safety. Also, the cables are significantly longer than on the regular CR-

10.

Dual Z Rod Screws & Motors: As the form factor’s bigger, Creality uses two Z

axis screw rods and motors on this printer. This leads to a more reliable

performance. The Dual Lead Screw design will also stabilize the machine during

tall prints.

Auto-resume feature: In case of a power failure, the Creality CR-10 S5

remembers where it left off and will resume printing when you start it up again.

Heated bed: The Creality CR-10 S5 has a heated bed that lets you operate and

experiment with a lot of materials.

Connections: Connection-wise the Creality CR-10 S5 offers Micro-SD card and

a USB connector.

Removable glass bed: The bed can easily be removed to pluck the print off the

bed. Also, Creality throws in a spool of Kapton tape if you don’t want to print on

the bed directly.

Improved build quality: In comparison to the Creality CR-10, the quality of the

parts has been ramped up in the Creality CR-10 S5. Instead of using 3D printed

components, the frame uses injection-molded parts and aluminum rods.

GENERAL SPECIFICATIONS

Technology: FDM

Assembly: mostly assembled

Mechanical arrangement: Cartesian style

Manufacturer: Creality

3D PRINTING PROPERTIES

Build volume: 500 x 500 x 500 mm

Layer height: 100 –300 microns

Extruder style: Bowden

Extruder type: Single

Nozzle size: 0.4 mm

Max. extruder temperature: 260 °C

Max. heated bed temperature: 90 °C

Printing speed: 200 mm/s

Print chamber: Open

Bed leveling: Manual with optional upgrade

Connectivity: SD-Card, WiFi

Build-in camera for monitoring: No

MATERIALS:

Filament diameter: 1,75 mm

Third party filament: Yes

Filament materials: PLA, ABS, PETG, TPU, wood, carbon fiber

SOFTWARE REQUIREMENTS:

Operating system: Windows, Mac, Linux

Recommended Slicer: Cura, Simplify3D, Slic3r, Repetier Host

File types: STL, OBJ, DAE, AMF

DIMENSIONS AND WEIGHT:

Frame dimensions: 690 x 800 x 715 mm

Weight: 14 kg

To make matters even more complicated, Creality offers a “CR-10 S5” model.

This one has an even bigger build volume of 500 x 500 x 500 mm. Otherwise, it‘s

based on the Creality CR-10S.

Otros manuales para CR-10 S5

Tabla de contenidos

Otros manuales de Impresora 3D de Creality

Creality

Creality Falcon2 Manual de usuario

Creality

Creality Ender-5 Manual

Creality

Creality CR-10 V3 Manual de usuario

Creality

Creality CR-X Pro Manual de usuario

Creality

Creality K1C Manual de usuario

Creality

Creality HALOT-ONE PRO Manual de usuario

Creality

Creality Ender-5 Manual

Creality

Creality Ender-3 S1 Manual de usuario

Creality

Creality Ender-3 V3 KE Manual de usuario

Creality

Creality CR-10 SE Manual de usuario

Creality

Creality HALOT-ONE PLUS Manual de usuario

Creality

Creality Ender-3 V3 SE Manual de usuario

Creality

Creality Dual Z Manual de usuario

Creality

Creality ENDER-3 V2 Manual de usuario

Creality

Creality HALOT-MAX Manual de usuario

Creality

Creality CR-10 S5 Instrucciones de montaje

Creality

Creality CR-X Manual de usuario

Creality

Creality CR-6 Max Manual de usuario

Creality

Creality CR-6 SE Manual de usuario

Creality

Creality CR-10S Pro Manual

Creality

Creality CREALITY BOX Manual de usuario

Creality

Creality HALOT-ONE Manual de usuario

Creality

Creality CR-200B Pro Manual de usuario

Creality

Creality Ender-3 V3 KE Manual de usuario

Manuales populares de Impresora 3D de otras marcas

Ultimaker

Ultimaker S5 Material Station Manual de usuario

EcubMaker

EcubMaker TOYDIY Manual de usuario

AnyCubic

AnyCubic Kossel Plus Manual de usuario

ReDeTec

ReDeTec ProtoCycler Manual de usuario

Kywoo3D

Kywoo3D Tycoon IDEX Manual de usuario

CraftBot

CraftBot PLUS PRO Manual de usuario

3DGence

3DGence INDUSTRY F340 Manual de usuario

HP Jet Fusion 4200 Instrucciones de funcionamiento

Rokit

Rokit AEP Series Manual de usuario

AnkerMake

AnkerMake M5 Manual de usuario

DIYElectronics

DIYElectronics PRUSA I3 Instrucciones de montaje

Ackuretta

Ackuretta FreeShape 120 Manual de usuario

LONGER

LONGER LK5Pro Manual de usuario

Stratasys

Stratasys J850 Manual de usuario

MakerBot

MakerBot Replicator Manual de usuario

Stratasys

Stratasys FDM Vantage Series Manual de usuario

ZYYX

ZYYX Pro II Manual de usuario

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guía del usuario