Clarke CMSS Manual de usuario

ASSEMBLY INSTRUCTIONS

LS0817 - ISS 1

ORIGINAL INSTRUCTIONS

MITRE SAW STAND

MODEL NO: CMSS

PART NO: 6500966

2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for selecting this Clarke Mitre saw stand.

Read this manual before use, the warnings and cautions in this manual will

help you operate the mitre saw stand safely.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

SAFETY PRECAUTIONS

1. This mitre saw stand has a maximum load capacity of 15O kg which must

not be exceeded.

2. Do not stand on top of the mitre saw stand.

3. Take care when placing a load on to the mitre saw stand, it should be

placed gently so that the strain is taken up gradually. Do not drop a load

carelessly.

4. Always check the mitre saw stand for damage before use.

5. Always ensure you are working on a firm flat stable surface.

SPECIFICATIONS

Dimensions L x W x H 1000 x 1100 x 700-1005 mm

Maximum Load 150 kg

3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

1. Screw the handle onto the table

using the screws provided.

NOTE: Folded legs not shown for

clarity.

OPENING/CLOSING THE MITRE SAW STAND

1. Squeeze and hold the release

handle.

2. Swing the leg into position and let

go of the release handle.

• The leg should lock into place.

3. Press the locking pin shown and

pull the leg to the desired height.

• The locking pin must lock into

one of the holes on the leg.

• Make sure that the same hole is

used on each leg.

• On one of the legs, the foot

can also be adjusted as

required.

4. Repeat steps 1 to 3 with the

remaining legs.

5. Test the stability of the table

before use.

ATTACHING THE MITRE SAW

1. Place the mitre saw in the middle of the table and secure to the table

using the fixings supplied.

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Rack y soporte de Clarke

Clarke

Clarke CAX3TA Manual de usuario

Clarke

Clarke CWR1 Manual de usuario

Clarke

Clarke CT100PR Manual de usuario

Clarke

Clarke CSR4550BO Manual de usuario

Clarke

Clarke CRSF2 Manual de usuario

Clarke

Clarke CAX20S Manual de usuario

Clarke

Clarke CGR1 Manual de usuario

Clarke

Clarke CSM5175 Series Manual de usuario

Clarke

Clarke CAX6TBC Manual de usuario

Clarke

Clarke CAX3TBC Manual de usuario

Clarke

Clarke Strong-Arm CES680 Manual del propietario

Clarke

Clarke LB5S Manual de instrucciones

Clarke

Clarke CDS3 Manual de usuario

Clarke

Clarke MCD1 Manual de instrucciones

Clarke

Clarke CWC80B Manual de usuario

Clarke

Clarke MDS1 Manual de usuario

Clarke

Clarke CUTS1 Manual de usuario

Clarke

Clarke Strong-Arm CES450 Manual de usuario

Clarke

Clarke CTA150 Manual de usuario

Clarke

Clarke Metalworker CL430 Manual de usuario

Clarke

Clarke CWR45B Manual de programación

Clarke

Clarke CWR45 Manual de programación

Clarke

Clarke CAX3TAB Manual de usuario

Clarke

Clarke CARS1 Manual de instrucciones

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario