Clarke CPS125 Manual de usuario

METAL SHEARS

Model Nos:

CPS125, CPS150 & CPS200

Thank you for purchasing these CLARKE Metal Shears.

Please read this leaflet thoroughly and follow the instructions carefully, in doing so

you will ensure the safety of yourself and that of others around you, and you can

look forward to the tool giving you long and satisfactory service.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered

with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be

returned to us without prior permission.

This guarantee does not effect your statutory rights.

SAFETY PRECAUTIONS

As with all tools and workshop equipment, it is necessary to exercise caution when

they are put to use. Be aware of the inherent dangers associated with their use.

• Ensure the tool is firmly bolted down.

• ALWAYS keep hands and fingers well away from the cutting blades.

• ALWAYS wear suitable safety goggles when using the tool to prevent against

the possibility of damage from flying splinters.

• Round stock should be cut using the hole provided in the cutting blade ONLY.

• The tool is designed for cutting low carbon (mild) steel only. The attempted cutting

of tool steels, high carbon or alloyed steels will damage the cutting blades.

• ALWAYS keep the cutting Blades sharp and free from burrs or other damage.

• DO NOT exceed the maximum size for cutting...see ‘Specifications’.

• DO NOT use an extension to the lever. If hand leverage cannot cut the

metal, then the work is either too large or it is of the wrong material.

ASSEMBLY

Attach the handle securely, using the two screws provided.

Mount the tool on a sturdy workbench at a height which allows easy operation,

taking into account the general nature of the work expected to be carried out. It

is also possible for the tool to be floor mounted, again, depending upon the work

expected to be carried out.

The tool must be secure. If floor mounted, ensure it is positioned so that it will not

cause an obstruction when not in use. It should be adequately marked to avoid the

possibility of individuals, or traffic etc., inadvertently coming into contact with it.

SPECIFICATIONS

CPS125 CPS150 CPS200

Shear Size ........................................... 127mm (5”) .. 152mm (6”) .. 203mm (8”)

Cutting Capacity . Sheet Metal ...... 2mm ............. 3mm .............. 4mm

Round bar ......... 8mm dia. ...... 8mm dia. ...... 12mm dia.

Part No. ............................................... 1700250 ........ 17002555 ....... 1700260

OPERATION

Position the stock piece between the cutting blades, from the left hand side,

ensuring the ‘kick back’ lever is in place, and directly above the stock. Pull the

lever to cut the desired length, holding the stock piece firmly.

Round stock should ALWAYS be inserted through the hole in the upper cutting Blade.

Este manual sirve para los siguientes modelos

2

Tabla de contenidos

Otros manuales de Herramientas eléctricas de Clarke

Clarke

Clarke Contractor CON750 Manual de instalación y operación

Clarke

Clarke CHT879 Manual de usuario

Clarke

Clarke Woodworker CJS2 Manual de instalación y operación

Clarke

Clarke METALWORKER CDP201B Manual

Clarke

Clarke CIR450 Manual de instalación y operación

Clarke

Clarke CAT84 Guía de solución de problemas

Clarke

Clarke DHC-2 Manual de instrucciones

Clarke

Clarke CAT126 Manual de instalación y operación

Clarke

Clarke Air 25C Manual de instalación y operación

Clarke

Clarke CHG1600 Manual de usuario

Clarke

Clarke CAG120 Manual de instalación y operación

Clarke

Clarke ECSS-1 Guía del usuario

Clarke

Clarke CRT130 Manual de instrucciones

Clarke

Clarke CMFT250 Manual de instalación y operación

Clarke

Clarke CSB34 Manual de instrucciones

Clarke

Clarke Metalworker CDP301B Manual de instalación y operación

Clarke

Clarke Air CAT120 Manual de instalación y operación

Clarke

Clarke ECSS2 Manual de instrucciones

Clarke

Clarke CAT52 Manual de instalación y operación

Clarke

Clarke METALWORKER CDP401B Manual de instalación y operación

Clarke

Clarke STRONG-ARM CSA12F Manual de instrucciones

Clarke

Clarke CPSB200B Manual de instrucciones

Clarke

Clarke CAT221B Manual de instrucciones

Clarke

Clarke Air CAT105 Manual de instrucciones

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual