Clarke CAT171 Manual de usuario

USER INSTRUCTIONS

GC0417

SANDING DRUM SET

MODEL NO: CAT171

PART NO: 3120188

2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE 25-piece sanding drum set ideal for use

with electric hand drills, or hand operated air tools. (Refer to Specifications for

max. rotational speeds).

The set comprises 4 sets of abrasive sleeves for each drum size. Two sets

120grit, and 2 sets 80 grit.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

SPECIFICATION

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

Model Number CAT171

Drum Sizes 12.7mm,19mm, 25mm, 38mm, 50mm

Maximum Speed (rpm) 12mm - 30000

19mm - 25000

25mm - 15000

38mm - 10000

50mm - 7500

Spindle Size 3mm (12 mm)

6mm (19-50 mm)

3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFE OPERATION & USE

SAFE PRACTICE

NEVER use a drum if the spindle is bent or damaged.

If used with a high speed air tool, always check that the spindle is not bent by

first fitting to an electric hand drill, gently switching on, and observing the drum

runs true. If in doubt, do not use.

Ensure the drum is capable of withstanding the rotational speed of the tool -

refer to ‘Specifications’.

ALWAYS ensure the jaws are tight when fitting to a power tool, and always

retest for tightness before every operation.

ALWAYS wear a dust mask and safety goggles, manufactured to current

European Standards, and a pair of industrial quality gloves whenever you use

this drum set with a power tool.

When using on metal surfaces, take all necessary fire precautions as sparks will

be created.

METHOD OF USE

The nut on the spindle of each drum has a LEFT HAND thread. Turn the nut

clockwise to move it away from the drum so that a slight gap appears, then

slide the abrasive sleeve fully over the drum.

Turn the spindle nut anticlockwise so that the drum is squeezed and expands

to grip the sleeve. Turn the nut until the sleeve is held firm but take care not to

overtighten.

Insert the drum spindle into your power tool to the FULL DEPTH of the spindle,

having ensured the complete assembly is in perfect condition and tighten the

chuck or collet jaws fully.

WARNING: COMPONENTS OF THIS DRUM SET ARE DESIGNED TO ROTATE

AT VERY HIGH SPEED. IT IS VITAL THAT THEY ARE TREATED WITH CARE AND

RESPECT. DO NOT USE IF DAMAGED.

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Herramientas eléctricas de Clarke

Clarke

Clarke Woodworker CJS1-C Manual de instalación y operación

Clarke

Clarke PRO414 Manual de usuario

Clarke

Clarke X-PRO CAT140 Manual de instalación y operación

Clarke

Clarke CHG 1500B Manual de instalación y operación

Clarke

Clarke CHT 459 Manual de usuario

Clarke

Clarke CPSB100 Manual de instrucciones

Clarke

Clarke METALWORKER CMPS1 Manual de instrucciones

Clarke

Clarke METALWAORKER CDP502F Manual de instrucciones

Clarke

Clarke CPT1000 Manual de instrucciones

Clarke

Clarke METALWORKER CBS20 Manual de usuario

Clarke

Clarke CIR18LiC Manual de instalación y operación

Clarke

Clarke CEW1000 Manual

Clarke

Clarke CAT113 Guía de instalación

Clarke

Clarke CAT210 Manual de instalación y operación

Clarke

Clarke CSA10F Manual

Clarke

Clarke CWS200 Manual de instrucciones

Clarke

Clarke CAT50 Manual de instalación y operación

Clarke

Clarke CPSB200B Manual de instrucciones

Clarke

Clarke Air CAT63 Manual de instalación y operación

Clarke

Clarke CPSB200 Manual de instrucciones

Clarke

Clarke CTC150LI Manual de instrucciones

Clarke

Clarke CAT209 Manual de instalación y operación

Clarke

Clarke Contractor CON750 Manual de instalación y operación

Clarke

Clarke CAT126 Manual de instalación y operación

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual