Cisco PA-FE-FX Manual del operador

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Cisco Systems, Inc.

Corporate Headquarters

Tel: 800 553-NETS (6387)

408 526-4000

Fax: 408 526-4100

PA-FE-TX and PA-FE-FX Fast

Ethernet 100BaseT Port Adapter

Installation and Configuration

Product Numbers: PA-FE-TX(=) and PA-FE-FX(=)

Platforms Supported: Cisco 7200 Series, Cisco 7000 Series

and Cisco 7500 Series with VIP2, Cisco uBR7200 Series,

Cisco 7100 Series

Note If you ordered this port adapter as a spare, for your convenience Cisco has included a port

adapter installation and conﬁguration note for the Catalyst 5000 series Route Switch

Module/Versatile Interface Processor 2 (RSM/VIP2). Your port adapter is fully compatible with the

RSM/VIP2.

Text Part Number: 78-2659-08

Access Registrar, AccessPath, Any to Any, AtmDirector, CCDA, CCDE, CCDP, CCIE, CCNA, CCNP, CCSI, CD-PAC, the Cisco logo, Cisco Certified

Internetwork Expert logo, CiscoLink, the Cisco Management Connection logo, the Cisco NetWorks logo, the Cisco Powered Network logo, Cisco Systems

Capital, the Cisco Systems Capital logo, Cisco Systems Networking Academy, the Cisco Technologies logo, ControlStream, Fast Step, FireRunner,

GigaStack, IGX, JumpStart, Kernel Proxy, MGX, Natural Network Viewer, NetSonar, Network Registrar, Packet, PIX, Point and Click Internetworking,

Policy Builder, Precept, RouteStream, Secure Script, ServiceWay, SlideCast, SMARTnet, StreamView, The Cell, TrafficDirector, TransPath, ViewRunner,

VirtualStream, VisionWay, VlanDirector, Workgroup Director, and Workgroup Stack are trademarks; Changing the Way We Work, Live, Play, and Learn,

Empowering the Internet Generation, The Internet Economy, and The New Internet Economy are service marks; and Asist, BPX, Catalyst, Cisco, Cisco

IOS, the Cisco IOS logo, Cisco Systems, the Cisco Systems logo, the Cisco Systems Cisco Press logo, Enterprise/Solver, EtherChannel, EtherSwitch,

FastHub, FastLink, FastPAD, FastSwitch, IOS, IP/TV, IPX, LightStream, LightSwitch, MICA, NetRanger, Registrar, StrataView Plus, Stratm, TeleRouter,

and VCO are registered trademarks of Cisco Systems, Inc. in the U.S. and certain other countries. All other trademarks mentioned in this document are the

property of their respective owners. (9904R)

PA-FE-TX and PA-FE-FX Fast Ethernet 100Base-T Port Adapter Installation and Configuration

Preface v

Preface

This preface explains the objectives and organization of this document and how to ﬁnd additional

information on related products and services. This preface contains the following sections:

•Objectives, page v

•Organization, page vi

•Related Documentation, page vi

•Cisco Connection Online, page viii

•Cisco Documentation CD-ROM, page viii

Objectives This document describes how to install and conﬁgure the 100BaseTX and 100BaseFX port adapters

(PA-FE-TX[=] and PA-FE-FX[=]) in the following platforms:

•Cisco 7200 series routers—which consist of the two-slot Cisco 7202, the four-slot Cisco 7204

and Cisco 7204VXR, and the six-slot Cisco 7206 and Cisco 7206VXR

•Cisco uBR7200 series universal broadband routers—which consist of the six-slot (four cable

modem card slots and two port adapter slots) Cisco uBR7246 and the three-slot (two cable

modem card slots and one port adapter slot) Cisco uBR7223

•Cisco 7100 series routers—which consist of the Cisco 7120 series and Cisco 7140 series

•Second-generation Versatile Interface Processor (VIP2) in all Cisco 7500 series routers and in

Cisco 7000 series routers using the 7000 Series Route Switch Processor (RSP7000) and

7000 Series Chassis Interface (RSP7000CI) installed

Note The Cisco 7206VXR and the Cisco 7206 can be used as router shelves in a Cisco AS5800

Universal Access Server. For information about the Cisco 7206VXR and the Cisco 7206 as

router shelves, refer to the Cisco AS5800 Universal Access Server documentation listed in the

“Related Documentation” section on page vi.

Organization

vi PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration

Organization

This document is organized into the following chapters:

Related Documentation

•For hardware installation and maintenance information on Cisco 7100 series routers, refer to the

Cisco 7100 Series VPN Router Installation and Conﬁguration Guide publication that shipped

with your Cisco 7100 series router.

•For information on setting up a Virtual Private Network, see the Cisco 7100 Series VPN

Conﬁguration Guide.

•For hardware installation and maintenance information on Cisco 7200 VXR routers, refer to the

Cisco 7200 VXR Installation and Conﬁguration Guide publication that shipped with your

Cisco 7200 VXR router.

•For hardware installation and maintenance information on Cisco 7200 routers, refer to the Cisco

7200 Series Installation and Conﬁguration Guide that shipped with your

Cisco 7200 series router.

•For port adapter hardware and memory conﬁguration guidelines for Cisco 7200 series routers

(including the Cisco 7206VXR or Cisco 7206 as router shelves in a Cisco AS5800 Universal

Access Server), refer to the document Cisco 7200 Series Port Adapter Hardware Conﬁguration

Guidelines.

•For hardware installation and maintenance information on Cisco uBR7200 series universal

broadband routers, refer to the following publications that shipped with your router:

—Cisco uBR7246 Universal Broadband Router Installation and Conﬁguration Guide

—Cisco uBR7223 Universal Broadband Router Installation and Conﬁguration Guide

•For international agency compliance, safety, and statutory information for interfaces for

Cisco 7500 series routers, Cisco 7000 series routers, Cisco 7200 series routers, Cisco 7100 series

routers, and Cisco uBR7200 series universal broadband routers, refer to the following

publications:

—Regulatory Compliance and Safety Information for the Cisco 7500 Series Routers

—Regulatory Compliance and Safety Information for the Cisco 7000 Series Routers

—Regulatory Compliance and Safety Information for the Cisco 7200 Series Routers

—Regulatory Compliance and Safety Information for the Cisco uBR7246 Universal

BroadbandRouter or Regulatory Complianceand Safety Information for the Cisco uBR7223

Universal Broadband Router.

—Regulatory Compliance and Safety Information for the Cisco 7100 Series VPN Routers

•To view Cisco documentation or obtain general information about the documentation, refer to the

“Related Documentation” section on page vi, the “Cisco Documentation CD-ROM” section on

page viii, or call Customer Service at 800 553-6387 or 408 526-7208. Customer Service hours

are 5:00 a.m. to 6:00 p.m. Paciﬁc time, Monday through Friday (excluding company holidays).

Youcan also sende-mail to [email protected],refer to theCisco Information Packetthat shipped

with your router, or access Cisco documentation on the World Wide Web at

http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

Cisco Connection Online

viii PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration

Cisco Connection Online

CiscoConnection Online (CCO) isCisco Systems’ primary, real-time support channel.Maintenance

customers and partners can self-register on CCO to obtain additional information and services.

Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added

services to Cisco’s customers and business partners. CCO services include product information,

product documentation, software updates, release notes, technical tips, the Bug Navigator,

conﬁguration notes, brochures, descriptions of service offerings, and download access to public and

authorized ﬁles.

CCO serves a wide variety of users through two interfaces that are updated and enhanced

simultaneously: a character-based version and a multimedia version that resides on the World Wide

Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet

e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version

of CCO provides richly formatted documents with photographs, ﬁgures, graphics, and video, as well

as hyperlinks to related information.

You can access CCO in the following ways:

WWW: http://www.cisco.com

WWW: http://www-europe.cisco.com

WWW: http://www-china.cisco.com

Telnet: cco.cisco.com

Modem: From North America, 408 526-8070; from Europe, 33 1 64 46 40 82. Use the following

terminal settings: VT100 emulation; databits: 8; parity: none; stop bits: 1; and connection rates up

to 28.8 kbps.

For a copy of CCO’s Frequently Asked Questions (FAQ), contact [email protected]. For

additional information, contact [email protected].

If you are a network administrator and need personal technical assistance with a Cisco product that

isunder warranty orcoveredby amaintenance contract, contact Cisco’s Technical Assistance Center

(TAC) at 800 553-2447, 408 526-7209, or [email protected]. To obtain general information about

Cisco Systems, Cisco products, or upgrades, contact 800 553-6387, 408 526-7208, or

[email protected].

Cisco Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM package, which ships with

your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated

monthly. Therefore, it might be more current than printed documentation. To order additional copies

of the Documentation CD-ROM, contact your local sales representative or call customer service.

The CD-ROM package is available as a single package or as an annual subscription. You can also

access Cisco documentation on the World Wide Web at http://www.cisco.com,

http://www-china.cisco.com, or http://www-europe.cisco.com.

If you are reading Cisco product documentation on the World Wide Web, you can submit comments

electronically. Click Feedback in the toolbar and select Documentation. After you complete the

form, click Submit to send it to Cisco. We appreciate your comments.

CHAPTER

Overview 1-1

Overview

This chapter provides physical and functional overviews of the PA-FE-TX and PA-FE-FX Fast

Ethernet 100BaseT port adapters. The chapter contains the following sections:

•Port Adapter Overview, page 1-1

•Port Adapter Locations on the Supported Platforms, page 1-2

•LEDs, page 1-5

•Receptacles, Cables, and Pinouts, page 1-5

•Fast Ethernet Overview, page 1-9

•IEEE 802.3u 100BaseT Speciﬁcations, page 1-10

Port Adapter Overview

The PA-FE-TX and PA-FE-FX port adapters provide a 100-Mbps, 100BaseT Fast Ethernet interface

and support both full-duplex and half-duplex operation. Refer to the “Fast Ethernet Overview”

section on page 1-9 for additional information. Figure 1-1 shows the PA-FE-TX and Figure 1-2

shows the PA-FE-FX.

Note While the VIP2 supports online insertion and removal (OIR), individual port adapters do not.

To replace port adapters, you must ﬁrst remove the VIP2 from the chassis, then replace port adapters

as required.

Cisco 7100 series routers, Cisco 7200 series routers, and Cisco uBR7200 series universal broadband

routers support online insertion and removal (OIR) of port adapters.

Figure 1-1 PA-FE-TX—Faceplate View

H4495

ENABLED

MII

LINK

RJ45

FAST ETHERNET

Port Adapter Locations on the Supported Platforms

PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration

1-2

Figure 1-2 PA-FE-FX Port Adapter—Faceplate View

The PA-FE can be installed in the following slots on the hardware platforms described in this

document:

•VIP2—Port adapter slot 0 and port adapter slot 1

•Cisco 7200 series routers—Port adapter slot 1 and slot 2 of the Cisco 7202; port adapter slot 1

through slot 4 of the Cisco 7204 and Cisco 7204VXR; port adapter slot 1 through slot 6 of the

Cisco 7206 and Cisco 7206VXR

•Cisco uBR7200 series universal broadband routers—Port adapter slot 1 and slot 2 of the

Cisco uBR7246; port adapter slot 1 of the Cisco uBR7223

•Cisco 7100 series—Port adapter slot 3

Note Port adapters have a handle attached, but this handle is occasionally not shown to allow a full

view of detail on the port adapter’s faceplate.

Port Adapter Locations on the Supported Platforms

Figure 1-3 and Figure 1-4 show VIP2 models with installed port adapters. With the VIP2 oriented

as shown in Figure 1-3 or Figure 1-4, the left port adapter is in port adapter slot 0, and the right port

adapter is in port adapter slot 1.

In the Cisco 7000, Cisco 7507, and Cisco 7513 chassis, the VIP2 is installed vertically. In the

Cisco 7010 and Cisco 7505 chassis, the VIP2 is installed horizontally.

Figure 1-3 VIP2-15 or VIP2-40 with Two Port Adapters Installed—Horizontal Orientation

H6014

ENABLED

MII

LINK

FIBER

FAST ETHERNET

H6448

DRAM

SIMMs

Port adapter

in slot 0 Port adapter

in slot 1

SRAM

DIMM U5

CPU Boot ROM

Bus connector

U4 U2

Overview 1-3

Port Adapter Locations on the Supported Platforms

Figure 1-4 VIP2-50 with Two Port Adapters Installed—Horizontal Orientation

In Cisco 7200 series routers, port adapter slots are numbered from the lower left to the upper right,

beginning with port adapter slot 1 and continuing through port adapter slot 2 for the Cisco 7202,

slot 4 for the Cisco 7204 and Cisco 7204VXR, and slot 6 for the Cisco 7206 and Cisco 7206VXR.

Port adapter slot 0 is reserved for the optional Fast Ethernet port on the I/O controller—if present.

Note The I/O controller is available with or without a Fast Ethernet port. You can install both I/O

controller types in all Cisco 7200 series routers; however, when you install an I/O controller with a

Fast Ethernet port in a Cisco 7202, the system software automatically disables the port.

Figure 1-5 shows a Cisco 7206 with installed port adapters and an I/O controller with a Fast Ethernet

port. Not shown are the Cisco 7202, which has two port adapter slots, the Cisco 7204 and

Cisco 7204VXR, which have four port adapter slots, and the Cisco 7206VXR, which has six port

adapter slots. The PA-FE port adapters can be installed in any available port adapter slot in

Cisco 7200 series routers.

Bus connector

SRAM

daughter

card

Boot ROM CPU

Port adapter

in slot 0

Port

adapter

in slot 1

DRAM DIMM

H10447

Port Adapter Locations on the Supported Platforms

PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration

1-4

Figure 1-5 Port Adapter Slots in the Cisco 7200 Series—Cisco 7206

Figure 1-6 shows a Cisco uBR7200 series router with port adapters installed. In the Cisco uBR7246,

port adapter slot 1 is in the upper left position, and port adapter slot 2 is in the upper right position.

In the Cisco uBR7223, port adapter slot 1 is in the upper right position. The port adapters are

recessed into the chassis just below the I/O controller.

Figure 1-6 Cisco uBR7200 Series with Port Adapters Installed—Cisco uBR7246

H6422

ETHERNET 10BT

ENABLED

LINK

ENABLED

MII

LINK

RJ45

FAST ETHERNET

Port adapter slot 5

Port adapter slot 3

Port adapter slot 1

FAST SERIAL

TOKEN RING

ETHERNET-10BFL

Blank port adapter

Port adapter slot 6

Port adapter slot 4

Port adapter slot 2

MII

RJ45

LINK

1O PWR

RJ-45

CPU RESET

FAST ETHERNET INPUT/OUTPUT CONTROLLER

ENABLED

PCMCIA

EJECT

SLOT 0

SLOT 1

FE MII

Port adapter slot 0

H11323

Cable modem card slot 3

Cable modem card slot 4

Cable modem card slot 5

Cable modem card slot 6

Port adapter slot 0

(I/O controller) Port adapter slot 1

(blank) Port adapter slot 2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Tarjeta de red de Cisco

Cisco

Cisco WAN Interface Card WIC-1DSU-56K4 Manual de usuario

Cisco

Cisco PA-T3 Instrucciones de funcionamiento y mantenimiento

Cisco

Cisco EHWIC-4SHDSL-EA Hoja de instrucciones

Cisco

Cisco EHWIC 1 GE-SFP-CU Manual de usuario

Cisco

Cisco WUSB54GSC Manual de usuario

Cisco

Cisco IDTA153 Manual de usuario

Cisco

Cisco HWIC-4ESW - EtherSwitch HWIC Switch Manual de usuario

Cisco

Cisco CompactFlash Adapter Manual de usuario

Cisco

Cisco NPE-175 Manual del operador

Cisco

Cisco CTX2500 Manual de usuario

Cisco

Cisco Catalyst 4500 Series Manual

Cisco

Cisco Linksys WUSB54G Manual de usuario

Cisco

Cisco WAN Interface Cards Cable WIC-1B-U Manual de usuario

Cisco

Cisco WUSB100 Manual de usuario

Cisco

Cisco LINKSYS PLTS200 Manual de usuario

Cisco

Cisco uBR10-SRP-OC12SML Manual de usuario

Cisco

Cisco LINKSYS WUSB54GR Manual de usuario

Cisco

Cisco PA-4C-E 1 Manual del operador

Cisco

Cisco One-Port Serial WAN Interface Card Cable... Manual de usuario

Cisco

Cisco VWIC-2MFT-T1 - Multiflex Trunk Voice/WAN Interface Card Expansion... Manual de usuario

Cisco

Cisco uBR-MC28U Manual de usuario

Cisco

Cisco DFC3A Manual de instalación y operación

Cisco

Cisco 12000 - Series Chassis Modular Expansion... Instrucciones de funcionamiento y mantenimiento

Cisco

Cisco MGX-FRSM-2CT3 Manual de usuario

Manuales populares de Tarjeta de red de otras marcas

FirstComm

FirstComm OBiWiFi5G Manual de usuario

Sun Microsystems

Sun Microsystems Interface Adapter Manual de usuario

TRENDnet

TRENDnet TU2-ETG Manual de usuario

YASKAWA

YASKAWA SI-EN3 Manual de usuario

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manual de usuario

Belkin

Belkin F5D7050 Manual de usuario

3Com

3Com EtherLink 3C509B Manual de usuario

TRENDnet

TRENDnet TEG-PCITX Manual de usuario

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manual de usuario

TwinMOS

TwinMOS Booming Manual de usuario

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manual de usuario

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manual de usuario

National Instruments

National Instruments NI 9234 Manual de usuario

Hama

Hama 49276 Manual de usuario

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manual de operación

Compaq

Compaq Wireless LAN 100 Manual de usuario

Bose

Bose PowerMatch Dante Manual de usuario

TRENDnet

TRENDnet TEG-PCITXR Manual de usuario