Car-Interface CI-RL3-LR17 Manual de usuario

Version 29.01.2020 HW:CAM(V98)/(V31) CI-RL3-LR17

r.LiNK Video inserter

CI-RL3-LR17

Compatible with

Land Rover and Jaguar vehicles

with Incontrol Touch Pro Duo infotainment

and 10.2 inch monitor

Video-inserter for one rear-view camera

and two additional video inputs

Product features

Video-inserter for factory-infotainment systems

1 CVBS Input for rear-view camera

2 CVBS Video-inputs for after-market Video sources (e.g. USB-Player, DVB-T2

Tuner)

Automatic switching to rear-view camera input on engagement of the reverse gear

Activatable parking guide lines for rear-view camera (not available for all vehicles)

Video-in-motion (ONLY for connected video-sources)

Video-inputs NTSC compatible

Version 29.01.2020 HW:CAM(V98)/(V31) CI-RL3-LR17

Page2

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the compatibility of vehicle and accessories

1.3. Boxes and connectors –video interface

1.4. Settings of the 8 Dip switches (black)

1.4.1. Enabling the interface’s video inputs (dip 2-3)

1.4.2. Rear-view camera setting (dip 5)

1.4.3. Monitor selection (Dip 6-8)

1.5. Settings of the 4 Dip switches (CAN function –red)

2. Installation

2.1. Place of installation

2.2. Monitor removal –example Land Rover

2.3. Connection schema

2.4. Connection - factory head unit

2.5. Analog power supply for the video interface

2.6. Connection - video-sources

2.6.1. Audio insertion

2.6.2. After-market rear-view camera

2.6.2.1. Case 1: Interface receives the reverse gear signal

2.6.2.2. Case 2Interface does not receive the reverse gear signal

2.7. Connection - video-interface and external keypad

2.8. Picture settings

3. Interface operation

3.1. By factory touch screen

3.2. By keypad

4. Specifications

5. FAQ –Trouble Shooting-Interface functions

Version 29.01.2020 HW:CAM(V98)/(V31) CI-RL3-LR17

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. Apart from using this

product in an unmoved vehicle, it should only be used to display fixed menus or rear-view-

camera video when the vehicle is moving (for example the MP3 menu for DVD upgrades).

Changes/updates of the vehicle’s software can cause malfunctions of the interface. Up to

one year after purchase we offer free software-updates for our interfaces. To receive a free

update, the interface has to be sent in at own cost. Wages for de-and reinstallation and

other expenditures involved with the software-updates will not be refunded.

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The

video interface’s place of installation must be free of moisture and away from heat sources.

Before the final installation in the vehicle of the video sources, we recommend a test-run

to ensure the compatibility of vehicle and interface. Due to changes in the production of

the vehicle manufacturer there’s always a possibility of incompatibility.

1.1. Delivery contents

Take down the serial number of the interface and store this manual for support

purposes: ____________________

Version 29.01.2020 HW:CAM(V98)/(V31) CI-RL3-LR17

Page4

Requirements

Brand

Compatible vehicles

Compatible systems

Land Rover

Range Rover since model year 2018

Range Rover Sport since model year 2018

Range Rover Velar since model year 2017

Range Rover Evoque since 04/2019

Discovery 5

and other vehicles with ICT Pro Duo

Incontrol Touch Pro Duo

with 10.2 inch 24:9 monitor (glossy)

and climate control panel via 2nd

touch monitor

XE since model year 2019

I-Pace since model year 2019

and other vehicles with ICT Pro Duo

Limitations

Video only The interface inserts ONLY video signals into the infotainment. For

inserting Audio signals either the possibly existing factory audio-AUX-

input or a FM-modulator can be used. If 2 audio sources shall be

connected to the infotainment, an additional electronic is necessary to

switch them.

Factory rear-view camera Automatically switching-back from inserted video to factory rear-view

camera is only possible while the reverse gear is engaged. To delay the

switch-back an additional electronic part is required.

Guidelines The display of the guidelines does not work in all vehicles.

Video input signal only NTSC compatible

1.2. Checking the compatibility of vehicle and accessories

Jaguar

Version 29.01.2020 HW:CAM(V98)/(V31) CI-RL3-LR17

Page5

1.3. Boxes and connectors –video interface

The video-interface converts the video signals of connected after-market sources in a factory

monitor compatible picture signal which is inserted in the factory monitor, by using separate

trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and

converts them for the video interface.

1.4. Settings of the 8 Dip switches (black)

Some settings have to be selected by the dip-switches on the

video interface. Dip position down is ON and position up is OFF.

See the following chapters for detailed information.

Dip

Function

ON (down)

OFF (up)

No function

set to OFF

CVBS Video 1-input

enabled

disabled

CVBS Video 2-input

enabled

disabled

No function

set to OFF

Rear-view cam type

after-market

factory or none

Guide lines

enabled

disabled

No function

set to OFF

No function

set to OFF

Version 29.01.2020 HW:CAM(V98)/(V31) CI-RL3-LR17

Page6

1.4.1.1. Enabling the interface’s video inputs (dip 2-3)

Only by dip switches enabled video inputs can be accessed by switching through the

interface’s video sources. It is recommended to enable only the required inputs. Disabled

inputs will be skipped while switching through the video interfaces inputs.

1.4.1.2. Rear-view camera setting (dip 5)

If set to OFF, the interface switches to factory picture while the reverse gear is engaged to

display factory rear-view camera or factory optical park system picture.

If set to ON, the interface switches to its rear-view camera input while the reverse gear is

engaged.

1.4.1.3. Enabling the Guide lines (dip 6)

If set to ON, the interface is activated to show the guide lines for the rear-view camera while

the vehicle is in reverse mode (not available for all vehicles).

Note: Some vehicles have a different code on the CAN-bus which the video-interface is not

compatible with. If the interface does not completely communicate with the vehicle CAN

bus, the reverse gear guide-lines can`t be shown during the vehicle’s operation, even if they

in some vehicles once appear after having switched the system to powerless!

Note: Dip 1, 4,7 und 8 are out of function and have to be set to OFF!

After each Dip-switch-change a power-reset of the video interface has to be performed!

Version 29.01.2020 HW:CAM(V98)/(V31) CI-RL3-LR17

Page7

1.5. Settings of the 4 Dip switches (CAN functions –red)

All 4 dip-switches of the video interface have no function for normal use

and have to be set to OFF.

Dip position “down”is ON and position up is OFF.

Navigation / system

Dip 1

Dip 2

Dip 3

Dip 4

Range Rover,

Range Rover Sport,

Discovery 5,

Range Rover Velar,

New Jaguar XE

OFF

Jaguar XF protocol

OFF

Jaguar XE 2016 protocol

OFF

If the CAN communication doesn’t succeed with the mentioned CAN positions, the other

CAN protocol can also be tried.

After each Dip-switch-change a power-reset of the video interface has to be performed!

2. Installation

To install the interface, first switch off the ignition and disconnect the vehicle’s battery.

Please read the owner`s manual of the car, regarding the battery`s disconnection! If

required, enable the car`s Sleep-mode (hibernation mode)

In case the sleep-mode does not succeed, the disconnection of the battery can be done

with a resistor lead.

If the necessary stabilized power supply for the interface is not taken directly from the

battery, the chosen connection has to be checked for being constantly stabile.

The interface needs a permanent 12V source!

2.1. Place of installation

The video interface is supposed to be installed at a suitable location behind the factory

monitor.

Version 29.01.2020 HW:CAM(V98)/(V31) CI-RL3-LR17

Page8

2.2. Moitor removal –example Land Rover

Version 29.01.2020 HW:CAM(V98)/(V31) CI-RL3-LR17

Page9

Version 29.01.2020 HW:CAM(V98)/(V31) CI-RL3-LR17

Page10

2.3. Connection schema

Tabla de contenidos

Otros manuales de Accesorios para automóviles de Car-Interface

Car-Interface

Car-Interface CI-RL2-MBN45 Manual de usuario

Car-Interface

Car-Interface RL4-NAC08 Manual de usuario

Car-Interface

Car-Interface v.LiNK CI-VL2-PC-HSD Manual de usuario

Car-Interface

Car-Interface TV-Free CI-TF-UCON22 Manual de usuario

Car-Interface

Car-Interface v.LiNK CI-VL2-LR14-OPS Manual de usuario

Car-Interface

Car-Interface CI-CARPLAY-NTG5 Manual de usuario

Car-Interface

Car-Interface CI-VL2-MIB-3 Manual de usuario

Car-Interface

Car-Interface CI-RL4-NAC08 Manual de usuario

Car-Interface

Car-Interface CI-RL2-MTC Manual de usuario

Car-Interface

Car-Interface TV-Free Manual de usuario

Car-Interface

Car-Interface CI-RL4-NAC12 Manual de usuario

Car-Interface

Car-Interface CI-CARPLAY-MMI3G Manual de usuario

Car-Interface

Car-Interface r.LiNK CI-RL2-N900 Manual de usuario

Car-Interface

Car-Interface CI-RL3-MIB-TT Manual de usuario

Car-Interface

Car-Interface v.LINK VL2-MIB-3 Manual de usuario

Car-Interface

Car-Interface CI-RL4-LR17 Manual de usuario

Car-Interface

Car-Interface CI-V5-CIC-F-PNP Manual de usuario

Car-Interface

Car-Interface c.LOGiC CI-C2-MK-CD Manual de usuario

Car-Interface

Car-Interface CI-UCON7-JEEP Manual de usuario

Car-Interface

Car-Interface r.LiNK CI-RL2-RLINK Manual de usuario

Car-Interface

Car-Interface CI-AUX-110 Manual de usuario

Car-Interface

Car-Interface CI-RL4-UCON12 Manual de usuario

Car-Interface

Car-Interface CI-RL4-UCON8-LV Manual de usuario

Car-Interface

Car-Interface CI-C1-RNSE Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario