Billion BiPAC 5200 Manual de usuario

BiPAC 5200 Series

(802.11g) ADSL2+ Modem/Router

Quick Start Guide

Billion BiPAC 5200 Series ADSL2+ Modem/Router

For more detailed instructions on configuring and using

the (802.11g) ADSL2+ Modem/Router, please refer to the

on-line manual.

Package Contents

BiPAC 5200 series ADSL2+ Modem/Router

CD-ROM containing the on-line manual

RJ-11 ADSL/telephone Cable

Ethernet (CAT-5 LAN) Cable

AC-DC power adapter (12VDC, 1A) for BiPAC 5200 / 5200G

AC-AC power adapter (12VAC, 1A) for BiPAC 5200S

This Quick Start Guide

Warning

 Do not use the BiPAC 5200 Series in high humidity or high

temperatures.

 Do not use the same power source for the BiPAC 5200 Series as

other equipment.

 Do not open or repair the case yourself. If the BiPAC 5200

Series is too hot, turn off the power immediately and have it

repaired at a qualified service center.

 Avoid using this product and all accessories outdoors.

ttention

 Place the BiPAC 5200 Series on a stable surface.

 Only use the power adapter that comes with the package. Using

a different voltage rating power adaptor may damage the router.

Quick Start Guide

The Front LEDs

BiPAC 5200

BiPAC 5200S

BiPAC 5200G

LED Meaning

1 PPP : Lit steady when there is a PPPoA / PPPoE connection.

2 ADSL: Lit when successfully connected to an ADSL DSLAM (“linesync”).

3 LAN Port: Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps.

Blinking when data is Transmitted / Received.

4 WLAN :

(5200G

only)

Lit green when the wireless connection is established.

Flashes when sending/receiving data.

5 SYS : Lit when the system is ready.

6 PWR : Lit when power is ON.

Billion BiPAC 5200 Series ADSL2+ Modem/Router

The Rear Ports

BiPAC 5200

2 4 5

BiPAC 5200S

5432

BiPAC 5200G

5 4

Port Meaning

1 Power Switch Power ON/OFF switch

2 PWR Connect the supplied power adapter to this jack.

3 RESET

After the device is powered on, press it to reset the device or

restore to factory default settings.

0-3 seconds: reset the device

6 seconds above: restore to factory default settings (this is used

when you can not login to the router, e.g. forgot the password)

4 LAN

(RJ-45

connector)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four

LAN ports when connecting to a PC or an office/home network of

10Mbps or 100Mbps.

5 ADSL(LINE) Connect the supplied RJ-11 (“telephone”) cable to this port when

connecting to the ADSL/telephone network.

Quick Start Guide

Connecting BiPAC 5200

1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.

2. Power on the device.

3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.

Billion BiPAC 5200 Series ADSL2+ Modem/Router

Connecting BiPAC 5200S

1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.

2. Power on the device.

3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.

Quick Start Guide

Connecting BiPAC 5200G

1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.

2. Power on the device.

3. Make sure the PWR, SYS, and WLAN LEDs are lit steadily and that the relevant LAN LED is

lit.

Billion BiPAC 5200 Series ADSL2+ Modem/Router

Configuring PC in Windows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows 2000

1. Go to Start / Settings / Control Panel. In the Control

Panel, double-click on Network and Dial-up

Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Otros manuales para BiPAC 5200

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Enrutador de red de Billion

Billion

Billion BiPAC 8800NL R2 Guía de configuración

Billion

Billion BiPAC 5200W Manual de usuario

Billion

Billion BiPAC 5200S RC Series Manual de usuario

Billion

Billion BiPAC 7402G Manual de usuario

Billion

Billion BiPAC 7300M Manual de usuario

Billion

Billion BiPAC 7404V series Manual de usuario

Billion

Billion BiPAC 8200AXL-1200 Manual de usuario

Billion

Billion BiPAC 7300G RA Manual de usuario

Billion

Billion BiPAC 7404VGOX Manual de usuario

Billion

Billion BiPAC 2072 Manual de usuario

Billion

Billion BiPAC 6200WZL R2 Manual de usuario

Billion

Billion BiPAC 5200G R4 Series Manual de usuario

Billion

Billion BIPAC-7402 Manual de usuario

Billion

Billion BiPAC 7700N Manual de usuario

Billion

Billion BIPAC-741 GE V2.0 Manual de usuario

Billion

Billion BiPAC 5200N RC Manual de usuario

Billion

Billion BiPAC 5200N Manual de usuario

Billion

Billion myGuard 7202 Manual de usuario

Billion

Billion BiPAC 7300 Manual de usuario

Billion

Billion BiPAC 7100SG Manual de usuario

Billion

Billion BILLION BIPAC-7500GL Manual de usuario

Billion

Billion BiPAC 710C2 Manual de usuario

Billion

Billion BiPAC 7402X Series Manual de usuario

Billion

Billion BiPAC 7560G Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario