AWS AMW-13 Manual de usuario
American Weigh Scales, Inc.
User Manual
AMW-13
Digital Tabletop Scale
AMW-13
g
ON/OFF
HoldModeTare
AMW-13 Manual
Thank you for purchasing the American Weigh
AMW-13 digital tabletop scale. Please read all
operating instructions carefully before use. This
electronic scale is a precision instrument. With normal
care and proper treatment, it will provide years of
reliable service.
Never load the scale with more than the maximum
capacity. Overloading will permanently damage it!
Avoid any exposure to extreme heat or cold. Your
scale works better when operated at normal room
temperature. Always allow the scale to acclimate to
normal room temperature for at least one hour before
use. Give your scale sufcient warm up time. Usually
30-60 seconds before calibration to give the internal
components a chance to stabilize.
Keep your scale in a clean environment. Dust, dirt,
moisture, vibration, air currents and a close distance to
other electronic equipment can all cause an adverse
effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed
onto tray top. Although this scale is designed to be
quite durable, try to avoid rough treatment as this may
permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the
scale. This is a precision instrument and must be
handled with extreme care.
Only operate the scale on a stable, vibration free
surface.
I. OPERATION
Place Scale on a horizontal at surface.
1. Press [ON/OFF] key.
2. Wait until "0.0” is displayed.
3. Put the object(s) on the weighing platform.
4. Using the [MODE] key, you can switch between the
weighing units.
II. TARE WEIGHING
1. Turn on scale as described above.
2. Place the "tare item" on the platform.
3. Press [TARE] and wait until "0.0" is displayed.
4. Add the "net-weight-item".
III. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating on an unstable surface. Please keep this in
mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
Battery-Symbol, [lo]
Change the batteries.
[OUE2] Recalibrate the scale as shown above.
[EEEEE] You are overloading the scale. Remove the
excessive load immediately!
[UNST] Use the scale in a more stable position
Specications
Model AMW-13
Capacity 6000g / 13lb
Resolution 1g / 0.1oz
Weighing Units grams (g), pounds / ounces (lb/oz)
Display 5 - Digit Backlit LCD
Platform Dimensions
(inches) 6 x 6 Stainless Steel
Scale Dimensions
(inches) 6.2 x 7.2 x 1.6
Power one 9V Battery (included) or AC-Adapter (sold seperate)
Gross Weight 1.69 lb
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Escala de AWS
AWS
AWS 330LPW Manual de usuario
AWS
AWS MDI-20 Manual de usuario
AWS
AWS AC-650 Manual de usuario
AWS
AWS AMW-500i Manual de usuario
AWS
AWS QS-500 Manual de usuario
AWS
AWS 330HRS Manual de usuario
AWS
AWS ACP-200 Manual de usuario
AWS
AWS EDGE-5K Manual de usuario
AWS
AWS QUANTUM Instrucciones de montaje
AWS
AWS BT2 series Manual de usuario
AWS
AWS AMW-55 Manual de usuario
AWS
AWS CP5-100 Manual de usuario
AWS
AWS CM-500 Manual de usuario
AWS
AWS MSC-200 Manual de usuario
AWS
AWS AERO-100 Manual de usuario
AWS
AWS DK-5K Manual de usuario
AWS
AWS 396TERA Manual de usuario
AWS
AWS CV-100 Manual de usuario
AWS
AWS ScaleMate SM-200 Manual de usuario
AWS
AWS CP-300 Manual de usuario
