AWS MDI-20 Manual de usuario

Tabla de contenidos

Manuales populares de Escala de otras marcas

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario

Fidelity Electronics

Fidelity Electronics G2e Manual de usuario

MDI-20 (44lb x 0.1oz)

User Manual

Baby Scale

MDI-20

Copyright © 2011 American Weigh Scales, Inc.

All rights reserved. Rev. 1.0

MDI-20

Thank you for purchasing the American Weigh MDI-20

baby scale. Please read all operating instructions carefully before

use. Scales are precision measuring devices and should always

be handled with proper care. To ensure years of reliable service,

keep these simple tips in mind:

• Do not exceed the scale’s maximum capacity. Overloading

your scale can permanently damage it!

• Avoid exposure to extreme heat or cold. Scales perform

best at normal room temperature. If temperatures have

changed dramatically, calibration and adjustment may be

necessary.

• Allow your scale to warm up for 30-60 seconds before

performing calibration and adjustment(if available).

• Store your scale in a clean, dry location. Dust, dirt, and

moisture can accumulate on the weighing sensors and

electronics causing inaccuracy or malfunction.

• Avoid using your scale in close proximity to strong radio

wave emitting devices such as computers, cash registers,

and cordless phones.

• Alwaysweighonaatandlevelsurface,freefrom

vibrations and drafts. The corner of a room is usually the

most stable.

• Gently apply all items to be weighed. Do not drop items

onto the weighing platform.

• Avoid dropping your scale. The warranty does not cover

damage due to rough treatment or overload.

• Checkthebatteriesrstifyouarehavinganytrouble

with your scale. This simple step can remedy most scale

issues.

• Do not disassemble your scale. This product contains no

user serviceable parts.

UNIT SET

Max: 44lb

d: 0.1oz

MDI-20

TARE

I. Part List

1. Scale

2. AA Batteries (x4)

II. Key Description

III. Battery Installation

1. Beforeusingthescaleforthersttime,checkthebattery

compartment and remove any plastic insulation strips or

packaging that may be in place to prevent battery drainage

during shipping/storage.

2. If you are replacing the batteries, make sure the positive

and negative contacts are properly aligned.

SET Key

UNIT Key

ON/OFF

TARE Key

MDI-20

IV. Scale Operation

1. Placethescaleonaat,levelsurface.

2. Press the /TARE key to turn the scale on and weight for

the display to show “0.0”.

3. You may now place your baby onto the scale.

4. Whenyouarenishedweighing,holdthe /TARE key to

turn the scale off.

V. Zeroing The Scale

If you wish to zero out the weight of an item such as a blanket,

follow these steps:

1. Place the blanket on the center of the weighing platform.

2. Wait for the weight to stabilize then tap the /TARE key

briey.Thedisplaywillresettozero.

3. Now place the baby on the scale. Only the baby’s weight

will be displayed.

4. When the blanket and baby are removed, a negative

number will be displayed. Tap /TARE to reset the display

back to zero again.

VI. Changing the Unit of Measure

1. Press and hold the UNIT key for 3~4 seconds to change

the scale’s displayed unit of measure.

2. If the scale is turned off then back on, it will default to the

last unit used.

• MDI-20 Units: kg (Kilogram) lb:oz (Pound:Ounce)

VII. Memory Function

1. Place an item to be weighed on the scale platform.

2. Oncetheweighthasstabilized,thedisplaywillash,show

weight value until the /TARE key is pressed again.

3. Press the SET key to recall the last weight result.

4. Press the SET key repeatedly to continue cycling through

the past 9 weighing results.

5. The display will return to normal weighing mode after 3

seconds of inactivity.

VIII. Using The Built-In Measuring Tape

1. Locate and open the door on the left side of the scale.

2. Extend the measuring tape out to

the desired length.

3. Whennishedmeasuring,youcan

press the button on the underside

of the scale to retract the measuring

tape. To keep the tape from lashing

as you retract it, hold one end and

guide it back in slowly.

IX. Error Codes

1. Lo -Batteries are low. Replace the batteries.

2. O-ld - Maximum capacity exceeded. This scale cannot be

used to give measurements over 44lbs.

X. Specications

MDI-20

Max. Capacity 20kg / 44lb

Readability 0.005kg / 0.1oz

Min. Capacity 0.1kg / 3.5oz

Power 4 x AA

Dimensions 3.3 x 16.5 x 25.7”

Display Size 1.0 x 3.3”

Warranty 10 Year Limited Warranty

Bottom View

Push to Retract

Measuring Tape

MDI-20

American Weigh Scales, Inc.

Norcross, GA 30092, U.S.A

MadeinChinatoourexactspecicationsandqualitycontrol.