Avocent DSR 1024 Manual de usuario

The following instructions will help you

to connect your DSR switch.

Should you require further assistance, please

consult your installer/user guide.

Avocent, the Avocent logo, The Power of Being There, DSView and DSR are registered trademarks of Avocent Corporation. All other marks are the property of their respective owners. ©2004 Avocent Corporation. All rights reserved. 590-441-501A

Local

Connection

Server

Connect the

server to the

DSRIQ module.

Connect a DSRIQ

module to the

DSR switch.

Power

Transformer

The Power of Being There

To connect a DSR switch

Plug in the keyboard,

monitor and mouse for

your local connection.

Power down the

target server and

attach the power cord

to the DSR switch.

Quick Installation Guide

DSR®

1024 Switch

Connecting power to the

DSR switch

Power down the target server that will be part of

your DSR switching system. Locate the power

transformer and cord that came with your DSR switch.

Plug the 4-pin connector into the rear of the DSR

switch. Plug one end of an AC power cord into the

transformer box and the other end into an appropriate

AC wall outlet.

Connecting the local port

Plug a VGA monitor and the PS/2 keyboard and mouse

cables into the appropriately labeled DSR ports.

Connecting a DSRIQ module to the

DSR switch

Plug one end of a CAT 5 cable (4-pair, up to 10 meters)

into the DSRIQ port and plug the other end into the

RJ-45 connector of a DSRIQ module.

Connecting the server to the

DSRIQ module

Plug the DSRIQ module into the appropriate ports on

the back of the target server.

(Continued on reverse side)

DSR1024 Switch

The following instructions will help you

to connect your DSR switch.

Should you require further assistance, please

consult your installer/user guide.

Connecting the network

Plug a CAT 5 cable from your Ethernet network into

the LAN port on the back of your DSR switch. Network

users will access the DSR switch through this port.

Connecting an external modem

(optional)

The DSR switch may also be accessed using an ITU

V.92, V.90 or V.34-compatible modem. Plug one end

of the included RJ-45 serial cable into the MODEM

port on the back of your DSR switch. Plug the other

end into the RJ-45 to DB-9 (male) adaptor, which

then plugs into the modem.

NOTE: Using a modem connection instead of a

LAN connection will limit the performance

capability of your DSR switch.

SPC Power

Control Device

Server

Modem

DSView®

Server

Software

Connect the switch

to the network.

Connect the

target server and

DSR1024

switch to the

SPC device.

The Power of Being There

To connect a DSR switch

(continued from reverse side)

Quick Installation Guide

DSR®

1024 Switch

Plug in the

external modem.

Telephone

network

Ethernet

Connecting the SPC power control

device (optional)

Plug one end of the cable supplied with the SPC power

control device into the SPC port on the DSR switch

and plug the other end into the SPC RJ-45 port. Plug

the power cord from the target server into an SPC

power outlet. Plug the SPC device into an appropriate

AC wall outlet.

Powering target and switch

Power up the target server and then power up the

DSR switch.

For additional information

For further instructions on DSR switch connection,

software setup and security configuration, please refer

to the installer/user guide included with the switch.

Check http://register.avocent.com for the latest DSR

software and firmware updates.

DSR1024 Switch

Otros manuales para DSR 1024

Otros manuales de Cambiar de Avocent

Avocent

Avocent DSR Series DSR1030 Instrucciones de instalación y mantenimiento

Avocent

Avocent AMX5010 Manual de usuario

Avocent

Avocent SwitchView Manual de usuario

Avocent

Avocent MPU1016-001 Instrucciones de instalación y mantenimiento

Avocent

Avocent DS1800 Manual de usuario

Avocent

Avocent DSR Series DSR1021 Manual de usuario

Avocent

Avocent DSR Series Instrucciones de instalación y mantenimiento

Avocent

Avocent 120 Manual de usuario

Avocent

Avocent ESP Serial Hub Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView SC4 UAD Manual de usuario

Avocent

Avocent SWITCHVIEW OSD - Manual de usuario

Avocent

Avocent AutoView 200 Instrucciones de instalación y mantenimiento

Avocent

Avocent AutoView 1000R Manual de usuario

Avocent

Avocent MPU1016DAC-001 Manual de usuario

Avocent

Avocent SwitchView IP 1020 Manual de usuario

Avocent

Avocent ESP Multi-Interface Serial Hub SuperSerial Manual de usuario

Avocent

Avocent SC 1x4 Manual de usuario

Avocent

Avocent DSR Series DSR1020 Manual de usuario

Avocent

Avocent AMX Switch Series Instrucciones de instalación y mantenimiento

Avocent

Avocent Eletric Keyboard Instrucciones de instalación y mantenimiento

Avocent

Avocent SWITCHVIEW PC Manual de usuario

Avocent

Avocent DSR Series DSR2035 Manual de instrucciones

Avocent

Avocent AMX 5130 Manual de usuario

Avocent

Avocent SwitchView SC8 DVI Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario