Avocent AutoView 200 Instrucciones de instalación y mantenimiento

AutoView®200/400

Installer/User Guide

INSTRUCTIONS

This symbol is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

DANGEROUS VOLTAGE

This symbol is intended to alert the user to the presence of uninsulated

dangerous voltage within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

POWER OFF

This symbol indicates the principal on/off switch is in the off position.

POWER ON

This symbol indicates the principal on/off switch is in the on position.

PROTECTIVE GROUNDING TERMINAL

This symbol indicates a terminal which must be connected to earth ground

prior to making any other connections to the equipment.

AutoView

200/400

Installer/User Guide

Avocent, the Avocent logo and The Power of Being There are

trademarks of Avocent Corporation. AutoView and LongView are

registered trademarks of Cybex Computer Products Corporation.

All other marks are the property of their respective owners.

USA Notification

Warning: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

Canadian Notification

This digital apparatus does not exceed the Class A limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the Canadian

Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les

limites applicables aux appareils numériques de la classe A prescrites dans le Règlement

sur le brouillage radioélectrique édicté par le Ministère des Communications du Canada.

Japanese Notification

Agency Approvals

UL 1950, CSA C22. 2 No. 950, EN60950

FCC part 15A, EN55022, EN50082

Table of Contents

Chapter 1: Product Overview

Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . 3

Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Chapter 2: Installation

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Rack Mounting your AutoView Unit . . . . . . . . . . . . 9

Installing an AutoView Switch . . . . . . . . . . . . . . . . 11

Installing a Multiple Switch System . . . . . . . . . . . . 16

Powering Up the AutoView Switch System . . . . . . 17

Chapter 3: Basic Operations

Viewing and Selecting Channels and Servers . . . . 21

Setting up the On-Screen Display . . . . . . . . . . . . . . 23

Setting User Station Security . . . . . . . . . . . . . . . . . 28

Scanning your AutoView System . . . . . . . . . . . . . . 30

Resetting your Mouse . . . . . . . . . . . . . . . . . . . . . . . 33

Displaying Version Information . . . . . . . . . . . . . . . 33

Keyboard Switching . . . . . . . . . . . . . . . . . . . . . . . . 33

Chapter 4: Advanced Operations

Multiuser Operation . . . . . . . . . . . . . . . . . . . . . . . . 39

Keyboard Translation (AutoView 400 only) . . . . . 40

Appendices

Appendix A: FLASH Upgrades . . . . . . . . . . . . . . . . 45

Appendix B: Technical Specifications . . . . . . . . . . 46

Appendix C: Technical Support . . . . . . . . . . . . . . . 47

Appendix D: Troubleshooting . . . . . . . . . . . . . . . . 48

Contents

Product Overview

Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . 3

Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Chapter 1: Product Overview 3

Chapter 1: Product Overview

Features and Benefits

The AutoView 200 and 400 series KVM switches allow you to control multiple

computers from one keyboard, monitor and mouse. The AutoView 200 allows

you to control up to 64 PCs, while the AutoView 400 enables control of up to 64

PC, Sun or USB computers. Both models work with IBM PC/AT, PS/2 systems and

100% compatible machines with support for VGA, SVGA, XGA and XGA-II video.

Figure 1.1: AutoView 200 Model

Figure 1.2: AutoView 400 Model

Multiuser/extended access capability

Your AutoView supports two simultaneous users in the system. This second user

may be placed up to 500 feet away from the AutoView system. Built-in extension lets

you place your second keyboard, monitor and mouse wherever you need them most.

Within the base unit, AutoView performs as a complete 2 x 8 matrix switch with both

users independently accessing any of the eight attached computers at the same time.

On-screen display capability

Configure and control your AutoView switch with the On-Screen Display

(OSD). Name your computer channels anything you wish, then select the

desired computer from an easy-to-use menu. Secondary menus let you

configure and initiate channel scanning and other system features.

Plug and Play

Your AutoView supports Plug and Play video and is compliant with the VESA

DDC2B standard.

Mouse translation

For added compatibility with your current equipment, your AutoView features

mouse translation capability. Through the AutoView 200, your PS/2 mouse will

work with any attached PC, whether it is serial or PS/2 mouse compatible.

REMOTE

USER

I/O

LOCAL USER

SETUP SUN

AC E G

BD F H

100-240V , .1A, 50/60 Hz

REMOTE

USER

I/O

LOCAL USER

SETUP

AC E G

BD F H

100-240V , .1A, 50/60 Hz

4AutoView 200/400 Installer/User Guide

With the AutoView 400 switch, your PS/2 mouse will also control Sun and USB

computers seamlessly.

Advanced security for total control over system access

Use the advanced multilevel security feature to configure and control server

access for every type of user in the system. The administrator has full access

privileges, while individual users can have viewing or viewing/editing

capability for each attached server.

FLASH upgrade capability

The AutoView 200/400 switches are FLASH upgradable. This allows you to

update your firmware at any time through a simple serial connection to insure

that your AutoView is always running at its best.

Mouse support

AutoView offers support for numerous PS/2 mice including: IBM ScrollPoint,

Logitech MouseMan Wheel, Logitech Trackman Marble Wheel, Logitech

Trackman Marble FX, Kensington 4 Button Mouse, Microsoft Explorer Mouse

and the Microsoft IntelliMouse family.

Figure 1.3: Example AutoView 200/400 Configuration

AutoView

Secondary

Switch (3)

Analog

User

Extended

Access

User

LongView

CAT5 Connection

KVM-Connection to Servers

KVM-Connection to Switch

AutoView

Secondary

Switch (2)

AutoView

Primary

Switch (1)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Avocent

Avocent

Avocent AMWorks Manual de usuario

Avocent

Avocent AutoView 1400 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR2010 Manual de usuario

Avocent

Avocent SWITCHVIEW PC Manual de usuario

Avocent

Avocent DSR SWITCH - Instrucciones de instalación y mantenimiento

Avocent

Avocent DS1800 Manual de usuario

Avocent

Avocent AutoView 1415 Instrucciones de instalación y mantenimiento

Avocent

Avocent AutoView 3100 Manual de usuario

Avocent

Avocent AMX5000 Manual de usuario

Avocent

Avocent KVM Switches Manual de usuario

Avocent

Avocent SwitchView®SC440 Guía de instalación

Avocent

Avocent Single port KVM over IP switch Manual de usuario

Avocent

Avocent AutoView 1415 Instrucciones de instalación y mantenimiento

Avocent

Avocent ESP-4 MI Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView SC380 Manual de usuario

Avocent

Avocent DSR Series DSR4030 Manual de usuario

Avocent

Avocent SwitchView SC120 Manual de usuario

Avocent

Avocent SwitchView DVI Manual de usuario

Avocent

Avocent SwitchView SwitchView IC Manual de usuario

Avocent

Avocent AutoView 1000R Instrucciones de instalación y mantenimiento

Avocent

Avocent AMX5000 Manual de usuario

Avocent

Avocent DSR SWITCH - Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView SC4 UAD Manual de usuario

Avocent

Avocent KVM over IP switch Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario