Avocent SwitchView Manual de usuario

Selecting a channel

A channel may be selected in one of the following ways:

• Pressing the button corresponding to the relevant

attached computer

• Using hotkey commands

When you change channels, the mouse will stop moving

for one to two seconds as the signals are synchronized.

Using SwitchView with

USB-connected systems

When USB devices are attached to the SwitchView, they

can be shared with any attached computer. Up to 126

USB devices can be connected by attaching additional

hubs to the unit.

Your SwitchView incorporates a USB 1.1B compliant hub

with two ports. The hub can be switched to any of the

attached computers in conjunction with, or separately

from, the USB mouse/keyboard and the video connections.

NOTE: Firmware updates can be installed using the

UPGRADE port. For instructions and the latest firmware,

visit www.avocent.com.

The following instructions will help you

operate your SwitchView unit.

Should you require further assistance, please

contact Avocent Technical Support. Using hotkey commands

A hotkey command can be used by pressing a series of

key sequences:

•<CTRL><CTRL> <X*> switches the keyboard,

mouse, video and all USB devices simultaneously

to another system.

•<CTRL><CTRL> <LEFT ARROW> toggles scan

mode on or off.

•<CTRL><CTRL> <UP ARROW> <X*> switches

the keyboard, mouse and video to another system

separately from the USB hub.

•<CTRL><CTRL> <DOWN ARROW> <X*>

switches the USB hub to another system separately

from the PS/2 keyboard/mouse and video.

*<X> = the port number of the attached computer

or USB hub

NOTE: <SCROLL><SCROLL> can be substituted in

any hotkey sequences that use <CTRL><CTRL>.

Quick Installation Guide

SwitchView USB

To operate a SwitchView unit

The Power of Being There

590-344-103A

Check our web site at www.avocent.com/support to search the knowledge base or use the on-line service request. Click on Contact Details for regional support.

The following instructions will help you

connect your SwitchView unit.

Should you require further assistance, please

contact Avocent Technical Support.

Powering the SwitchView unit

Power down all computers that will be attached to your

SwitchView unit. Plug the supplied power cord into the

power socket on the rear of the SwitchView unit. Plug

the other end into an appropriate AC power source.

Connecting the peripheral devices

Plug yourVGA monitor into the port labeled CONSOLE

on the back of the SwitchView. Speakers and a

microphone can be attached using the speaker and

microphone jacks labeled CONSOLE on the back of

the unit. Plug your USB keyboard and mouse into the

labeled ports on the front of the unit.

Connecting the first computer

Locate a KVM connection cable. Attach one end to

the monitor, USB, audio in and microphone ports on

the first computer to be attached to the SwitchView.

Route the other end to the SwitchView and attach it

to the 15-pin HDD, speaker and microphone ports.

The USB port sets are labeled PC1-PC4 to correspond

with the channels on the unit. The corresponding

speaker and microphone jack sets are labeled 1-4.

Connecting the remaining computers

Repeat step 3 to connect additional computers.

Connecting USB devices

Plug any USB devices or peripherals into the SwitchView

using the USB ports on the rear of the unit.

Powering the SwitchView unit and

attached computers

Power the SwitchView. Next to each port is a blue

LED. A blinking LED indicates that the attached

computer is not powered.

Power the first attached computer. Wait until it

has completely booted before switching to the

next computer and repeating the process.

Quick Installation Guide

SwitchView USB

Plug in the remaining

computers to the

SwitchView unit.

The Power of Being There

To connect a SwitchView USB

Plug in the monitor,

followed by the

keyboard and mouse.

Power down your

computers and attach

the appropriate

power cord.

Attach USB devices

to the rear ports of

the SwitchView unit.

Power up the

SwitchView unit

and all attached

computers.

UPGRADE

DC 12V, 1A

CPC4

2 1

PC3 PC2 PC1

CONSOLE

4 4 3 3 2 2 1 1

NOTE:

All drivers necessary for the SwitchView

are built into the unit. If you are installing the unit

with a Windows operating system and are

prompted for drivers, press NEXT until the

configuration is

complete.

Connect the first

computer to the

SwitchView unit.

Check our web site at www.avocent.com/support to search the knowledge base or use the on-line service request. Click on Contact Details for regional support.

The Power of Being There

UPGRADE

DC 12V, 1A

CPC4

2 1

PC3 PC2 PC1

CONSOLE

4 4 3 3 2 2 1 1

The Power of Being There

UPGRADE

DC 12V, 1A

CPC4

2 1

PC3 PC2 PC1

CONSOLE

4 4 3 3 2 2 1 1

The Power of Being There

UPGRADE

DC 12V, 1A

CPC4

2 1

PC3 PC2 PC1

CONSOLE

4 4 3 3 2 2 1 1

Otros manuales para SwitchView

Otros manuales de Cambiar de Avocent

Avocent

Avocent AutoView 1400 Instrucciones de instalación y mantenimiento

Avocent

Avocent AMX5010 Manual de usuario

Avocent

Avocent PS/2 KVM Manual de usuario

Avocent

Avocent SWITCHVIEW OSD - Manual de usuario

Avocent

Avocent Eletric Keyboard Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR1030 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR SWITCH - Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView SC4 UAD Manual de usuario

Avocent

Avocent AMX5000 Manual de usuario

Avocent

Avocent AMX5020 Instrucciones de instalación y mantenimiento

Avocent

Avocent AutoView 1000R Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent DSRTM 1021 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR1021 Manual

Avocent

Avocent Outlook 180DX Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView Manual de usuario

Avocent

Avocent DSR Series DSR2035 Manual de operación

Avocent

Avocent AutoView 3050 Manual de usuario

Avocent

Avocent SwitchView DVI Manual de usuario

Avocent

Avocent AMX Switch Series Manual de usuario

Avocent

Avocent DSR 1024 Instrucciones de instalación y mantenimiento

Avocent

Avocent AMX5100 Manual de usuario

Avocent

Avocent Cybex SwitchView SC8 DVI Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario