Anritsu MS2690A Manual de usuario

Document No.: M-W2855AE-52.0

ANRITSU CORPORATION

•

For safety and warning information, please read this

manual before attempting to use the equipment.

•

Additional safety and warning information is provided

within the MS2690A/MS2691A/MS2692A Signal

Analyzer Operation Manual (Mainframe Operation),

MS2830A Signal Analyzer Operation Manual

(Mainframe Operation), MS2840A Signal Analyzer

Operation Manual (Mainframe Operation), or MS2850A

Signal Analyzer Operation Manual (Mainframe

Operation). Please also refer to this document before

using the equipment.

•Keep this manual with the equipment.

MS2690A/MS2691A/MS2692A

and

MS2830A/MS2840A/MS2850A

Signal Analyzer

Operation Manual

Spectrum Analyzer Function

Remote Control

52nd Edition

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the

following safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings of

the symbols BEFORE using the equipment. Some or all of the following symbols may be used on all Anritsu

equipment. In addition, there may be other labels attached to products that are not shown in the diagrams in this

manual.

Symbols used in manual

This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols and

take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated

symbolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is

indicated symbolically in or near the circle.

This indicates a warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer

Operation Manual Spectrum Analyzer Function Remote Control

19 April 2007 (First Edition)

30 October 2017 (52nd Edition)

publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

DANGER

WARNING

CAUTION

iii

Notes On Export Management

This product and its manuals may require an Export License/Approval by

the Government of the product's country of origin for re-

export from your

country.

Before re-

exporting the product or manuals, please contact us to confirm

whether they are export-controlled items or not.

When you dispose of export-controlled items, the products/manuals nee

to be broken/shredded so as not to be unlawfully used for military purpose.

About This Manual

 Operation manual configuration

The operation manual configuration of the MS2690A/MS2691A/MS2692A,

MS2830A, MS2840A, and MS2850A Signal Analyzer is shown below.

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Phase Noise Measurement Function Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Phase Noise Measurement Function Remote Control)

MS2690A/MS2691A/MS2692A

Signal Analyzer Operation Manual

(Signal Analyzer Function Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Signal Analyzer Function Remote Control)

MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual

(Signal Analyzer Function Operation)

MS2690A/MS2691A/MS2692A

Spectrum Analyzer Operation Manual

(Spectrum Analyzer Function Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote Control)

MS2830A/MS2840A/MS2850A

Spectrum Analyzer Operation Manual

(Spectrum Analyzer Function Operation)

MS2690A/MS2691A/MS2692A Signal Analyzer Operation Manual

(

Main Frame O

eration

)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Main Frame Remote Control)

MS2840A Signal Analyzer Operation Manual (Main Frame Operation)

MS2830A Signal Analyzer Operation Manual (Main Frame Operation)

MS2850A Signal Analyzer Operation Manual (Main Frame Operation)

 Signal Analyzer Operation Manual (Mainframe Operation)

 Signal Analyzer Operation Manual (Mainframe Remote Control)

Description of basic operations, maintenance procedures, common

functions and common remote functions of the mainframe

 Signal Analyzer Operation Manual (Signal Analyzer Function)

 Signal Analyzer Operation Manual (Signal Analyzer Function Remote

Control)

Description of basic operations, functions and remote functions of the

signal analyzer

 Signal Analyzer Operation Manual (Spectrum Analyzer Function)

 Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote

Control) <This document>

Description of basic operations, functions and remote functions of the

spectrum analyzer

 Signal Analyzer Operation Manual (Phase Noise Measurement Function)

 Signal Analyzer Operation Manual (Phase Noise Measurement Function

Remote Control)

Description of basic operations, functions and remote functions of the

Phase Noise

Convention Used in This Manual

Except where there is a good reason to do otherwise, this manual

assumes the use of MS269xA.

Note that the descriptions in this manual also apply to MS2830A,

MS2840A, or MS2850A.

out Thi

apter 1

1.1 Ov

apter 2

2.1

2.2

2.3

2.4

Sig

2.5

2.6

2.7

2.8

2.9

2.10

2.11

2.12

2.13

2.14

2.15

Int

2.16

2.17

2.18

2.19

2.20

2.21

2.22

2.23

apter 3

3.1 IE

3.2

3.3 Fr

3.4 Le

3.5 RB

3.6 Ma

Manua

vervie

rview .........

CPI De

quency/Sp

el ...............

W/VBW ......

rker .............

nal Search..

ce ...............

eep/Trigger

asure Funct

P ................

st Average

nnel Powe

W ...............

ctrum Emi

rious Emis

ting the TOI

rnal Signal

nfiguring Ba

er Settings .

EStionable

ERation St

ting Extern

ting Save o

ting Noise

ative D

E488.2 Co

lication Co

quency/Sp

el Settings .

W/VBW Set

rker Setting

le of

.............

...........

...................

ice Me

n ................

...................

Gate ...........

ion ..............

...................

ower .........

..................

...................

sion Mask ..

ion Measur

Measurem

enerator

ch Measure

...................

tatus Regi

tus Registe

l Mixer ........

Event .......

loor Reducti

evice M

mon Devic

n Settings ..

...................

ings ...........

..................

onten

.............

...................

sage D

...................

ment Funct

nt Function

ontrol functi

ment Settin

...................

ter ..............

...................

on ...............

ssage

Messages

...................

..............

...................

tails .....

...................

ion ..............

..................

n ...............

s ................

...................

.................

ist ........

...................

........ I

.... 1-1

.... 1-2

.... 2-1

.. 2-31

.. 2-54

.. 2-76

2-103

2-166

2-186

2-250

2-323

2-350

2-446

2-479

2-529

2-576

2-712

2-823

2-852

2-859

2-952

2-965

2-980

2-989

-1010

-1017

.... 3-1

.... 3-3

.... 3-5

.... 3-7

.... 3-8

.... 3-9

.. 3-10

IV.

3.7 Sig

3.8 Tr

3.9 Sw

3.10 Me

3.11 Ba

3.12 Re

3.13 Ot

3.14 Se

apter 4

nal Search

ce Settings .

eep/Trigger

asure Funct

ch Measure

erence Sig

er Settings .

ting Extern

ative D

ettings ......

...................

Gate Settin

ion Settings

Function S

al Settings .

...................

l Mixer ........

evice M

...................

s .................

...................

ttings ..........

...................

ssage

...................

etails ...

.. 3-13

.. 3-15

.. 3-18

.. 3-23

.. 3-52

.. 3-54

.. 3-55

.. 3-56

.... 4-1

1-1

Overview

Chapter 1

This chapter provides an overview of the remote control of the Spectrum

Analyzer function (hereinafter, referred to as “this application”).

1.1 Overview ....................................................................... 1-2

Chapter 1 Overview

1-2.

1.1 Overview

Automatic measurement can be performed by using this instrument in

connection with an external controller (PC). This instrument is standard

equipped with GPIB, Ethernet, and USB interfaces. You can also select a

remote control command from the SCPI mode, which is a command

format defined by the SCPI Consortium, and Native mode, which is our

unique format.

See the

MS2690A/MS2691A/MS2692A and

MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual

(Mainframe Remote Control)

for how to switch the language mode.

You can use the Native mode by converting SCPI commands into Native

ones. See the

MS2690A/MS2691A/MS2692A and

MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual

(Mainframe Remote Control)

for details.

Otros manuales para MS2690A

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Anritsu

Anritsu

Anritsu MX269018A Manual de usuario

Anritsu

Anritsu MS2690A Manual de usuario

Anritsu

Anritsu MS2651B Manual de usuario

Anritsu

Anritsu VNA Master MS2026C Manual de usuario

Anritsu

Anritsu MT1810A Manual de usuario

Anritsu

Anritsu Spectrum Master MS2711E Manual de usuario

Anritsu

Anritsu 3656C W1 Manual de usuario

Anritsu

Anritsu BTS Master Manual de usuario

Anritsu

Anritsu Spectrum Master MS2721A Manual de usuario

Anritsu

Anritsu K250 Manual de usuario

Anritsu

Anritsu VectorStar ME7838D4 Manual de usuario

Anritsu

Anritsu MS2690A Manual de usuario

Anritsu

Anritsu MS2690A Manual de usuario

Anritsu

Anritsu MW9076 Series Manual de usuario

Anritsu

Anritsu MT8820C Instrucciones de instalación y funcionamiento

Anritsu

Anritsu MD1230A Manual de usuario

Anritsu

Anritsu ShockLine MS46131A-020 Manual de usuario

Anritsu

Anritsu ms2602a Manual de usuario

Anritsu

Anritsu MT9085 Series Manual de instrucciones

Anritsu

Anritsu MS2665C Manual de usuario

Anritsu

Anritsu MS2690A Manual de usuario

Anritsu

Anritsu AM-9000 Series Manual de usuario

Anritsu

Anritsu Site Master S331D Manual del propietario

Anritsu

Anritsu Field Master Pro Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario