Anritsu MS2690A Manual de usuario

Document No.: M-W2856AE-8.0

ANRITSU CORPORATION

MS2690A/MS2691A/MS2692A

Signal Analyzer

Option 020: Vector Signal Generator

Operation Manual

Operation

Eighth Edition

•For safety and warning information, please read this

manual before attempting to use the equipment.

•

Additional safety and warning information is

provided within the MS2690A/MS2691A/MS2692A

Signal Analyzer Operation Manual

(Mainframe

Operation). Please also refer

to this document

before using the equipment.

•

Keep this manual with the equipment.

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the

following safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings

of the symbols BEFORE using the equipment. Some or all of the following symbols may be used on all Anritsu

equipment. In addition, there may be other labels attached to products that are not shown in the diagrams in this

manual.

Symbols used in manual

This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols

and take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated

symbolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is

indicated symbolically in or near the circle.

This indicates a warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MS2690A/MS2691A/MS2692A

Signal Analyzer Option 020: Vector Signal Generator

Operation Manual Operation

14 May 2007 (First Edition)

11 July 2014 (Eighth Edition)

publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

DANGER

WARNING

CAUTION

iii

Equipment Certificate

Anritsu Corporation certifies that this equipment was tested before shipment

using calibrated measuring instruments with direct traceability to public

testing organizations recognized by national research laboratories, including

the National Institute of Advanced Industrial Science and Technology, and

the National Institute of Information and Communications Technology, and

was found to meet the published specifications.

Anritsu Warranty

Anritsu Corporation will repair this equipment free-of-charge if a

malfunction occurs within one year after shipment due to a manufacturing

fault, under the condition that this warranty is void when:

•The fault is outside the scope of the warranty conditions separately

described in the operation manual.

•The fault is due to mishandling, misuse, or unauthorized modification or

repair of the equipment by the customer.

•The fault is due to severe usage clearly exceeding normal usage.

•The fault is due to improper or insufficient maintenance by the customer.

•The fault is due to natural disaster, including fire, wind, flooding,

earthquake, lightning strike, or volcanic ash, etc.

•The fault is due to damage caused by acts of destruction, including civil

disturbance, riot, or war, etc.

•The fault is due to explosion, accident, or breakdown of any other

machinery, facility, or plant, etc.

.•The fault is due to use of non-specified peripheral or applied equipment

or parts, or consumables, etc.

•The fault is due to use of a non-specified power supply or in a

non-specified installation location.

•The fault is due to use in unusual environments(Note).

•The fault is due to activities or ingress of living organisms, such as

insects, spiders, fungus, pollen, or seeds.

In addition, this warranty is valid only for the original equipment purchaser.

It is not transferable if the equipment is resold.

Anritsu Corporation shall assume no liability for injury or financial loss of the

customer due to the use of or a failure to be able to use this equipment.

Note:

For the purpose of this Warranty, "unusual environments" means use:

•In places of direct sunlight

•In dusty places

•Outdoors

•In liquids, such as water, oil, or organic solvents, and medical fluids, or

places where these liquids may adhere

•In salty air or in place chemically active gases (sulfur dioxide, hydrogen

sulfide, chlorine, ammonia, nitrogen dioxide, or hydrogen chloride etc.)

are present

•In places where high-intensity static electric charges or electromagnetic

fields are present

•In places where abnormal power voltages (high or low) or instantaneous

power failures occur

•In places where condensation occurs

•In the presence of lubricating oil mists

•In places at an altitude of more than 2,000 m

•In the presence of frequent vibration or mechanical shock, such as in

cars, ships, or airplanes

Anritsu Corporation Contact

In the event that this equipment malfunctions, contact an Anritsu Service and

Sales office. Contact information can be found on the last page of the

printed version of this manual, and is available in a separate file on the CD

version.

Notes On Export Management

This product and its manuals may require an Export License/Approval by

the Government of the product's country of origin for re

export from your

country.

Before re

exporting the product or manuals, please contact us to confirm

whet

her they are export-controlled items or not.

When you disp

ose of export-

controlled items, the products/manuals need

to be broken/shredded so as not to be unlawfully used for military purpose.

Trademark and Registered Trademark

IQproducer

is a registered trademark of Anritsu Corporation.

Notice

The following actions are strictly prohibited for all of the software installed

in this product or otherwise provided by Anritsu:

1. Copying, except for archival purposes.

2. Transferring to a third party separately from this product.

3. Analyzing the incorpor

ated software including but not limited to

modifying, decompiling, disassembling, and reverse engineering.

CE Conformity Marking

Anritsu affixes the CE Conformity marking on the following product(s) in

accordance with the Council Directive 93/68/EEC to indicate that they

conform to the EMC and LVD directive of the European Union (EU).

CE marking

1. Product Model

Option: MS2690A/MS2691A/MS2692A-020 Vector Signal

Generator

2. Applied Directive and Standards

When the MS2690A/MS2691A/MS2692A-020 Vector Signal Generator

is installed in the MS2690A/MS2691A/MS2692A, the applied directive

and standards of this Option conform to those of the MS2690A/

MS2691A/MS2692A main frame.

PS: About main frame

Please contact Anritsu for the latest information on the main frame

types that MS2690A/MS2691A/MS2692A-020 can be used with.

vii

C-tick Conformity Marking

Anritsu affixes the C-tick marking on the following product(s) in

accordance with the regulation to indicate that they conform to the EMC

framework of Australia/New Zealand.

C-tick marking

1. Product Model

Option: MS2690A/MS2691A/MS2692A-020 Vector Signal

Generator

2. Applied Directive and Standards

When the MS2690A/MS2691A/MS2692A-020 Vector Signal Generator

is installed in the MS2690A/MS2691A/MS2692A, the applied directive

and standards of this Option conform to those of the MS2690A/

MS2691A/MS2692A main frame.

PS: About main frame

Please contact Anritsu for the latest information on the main frame

types that MS2690A/MS2691A/MS2692A-020 can be used with.

viii

About This Manual

Composition of Operation Manuals

The operation manuals for the MS2690A/MS2691A/MS2692A Signal

Analyzer are comprised as shown in the figure below.

MS2690A/MS2691A/MS2692A Option 020

Vector Signal Generator Operation Manual (Operation)

MS2690A/MS2691A/MS2692A

Signal Analyzer Operation Manual (Mainframe Operation)

Signal Analyzer Operation Manual (Mainframe Remote Control)

MS2690A/MS2691A/MS2692A Option 020

Vector Signal Generator Operation Manual (Standard Waveform Pattern)

Communication System Supporting IQproducer

Operation Manual

MS2690A/MS2691A/MS2692A Option 020

Vector Signal Generator Operation Manual (IQproducerTM)

MS2690A/MS2691A/MS2692A Option 020

Vector Signal Generator Operation Manual (Remote Control)

Signal Analyzer Operation Manual (Mainframe Operation)

Signal Analyzer Operation Manual (Mainframe Remote Control)

These manuals describe basic operating methods, maintenance

procedures, common functions, and common remote control of the signal

analyzer mainframe.

Vector Signal Generator Operation Manual (Operation)

This manual describes functions, operating methods, and so on of the

vector signal generator (option).

Vector Signal Generator Operation Manual (Remote Control)

This manual describes remote control of the vector signal generator

(option).

Vector Signal Generator Operation Manual (IQproducerTM)

This manual describes functions, operating methods, and so on of the

IQproducer, which is application software used with the vector signal

generator (option).

Vector Signal Generator Operation Manual (Standard Waveform

Pattern)

This manual describes details on the standard waveform pattern data

used with the vector signal generator (option).

In this document, indicates a panel key.

Otros manuales para MS2690A

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Anritsu

Anritsu

Anritsu Site Master S311D Manual de usuario

Anritsu

Anritsu Site Master S331L Manual de usuario

Anritsu

Anritsu S331E Manual de usuario

Anritsu

Anritsu VNA Master MS203 A Series Manual de usuario

Anritsu

Anritsu Site Master S820D Manual de usuario

Anritsu

Anritsu MT8801C Manual de usuario

Anritsu

Anritsu Spectrum Master MS2721A Manual de usuario

Anritsu

Anritsu MS27101A-IBCM Manual de usuario

Anritsu

Anritsu Series MS278XB Manual de usuario

Anritsu

Anritsu ML2437A Manual del propietario

Anritsu

Anritsu ShockLine Series Manual de usuario

Anritsu

Anritsu VectorStar MS4640A Series Manual de usuario

Anritsu

Anritsu MW82119B Manual de usuario

Anritsu

Anritsu Site Master S114C Manual de usuario

Anritsu

Anritsu Spectrum Master MS2711E Manual de usuario

Anritsu

Anritsu MS2690A Manual de usuario

Anritsu

Anritsu VectorStar ME7838G4 Manual de usuario

Anritsu

Anritsu ShockLine MS46121A Series Manual de usuario

Anritsu

Anritsu MS2840A Manual de usuario

Anritsu

Anritsu Sire Master S331D Manual de usuario

Anritsu

Anritsu MS2690A Manual de usuario

Anritsu

Anritsu VNA Master MS2024B Manual de usuario

Anritsu

Anritsu MP1632C Manual de usuario

Anritsu

Anritsu Site Master S251C Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario