Agilent Technologies PSA Series Manual de instalación y operación

Part Number E4440-90072

PrintedinUSA May2002

Agilent PSA Spectrum Analyzer

Flash Memory Installation Kit

Installation Note

Notice.

The information contained in this document is subject to change without notice.

Agilent Technologies makes no warranty of any kind with regard to this material, including but not limited

to, the implied warranties of merchantability and fitness for a particular purpose. Agilent Technologies

shall not be liable for errors contained herein or for incidental or consequential damages in connection with

the furnishing, performance, or use of this material.

Installation Note E4440-90072 3

Flash Memory Installation Kit

Introduction

This installation kit includes the latest Flash memory assembly and a CD that contains the

latest instrument firmware and measurement personalities. The replacement Flash board

has been preloaded with the operating system and core instrument firmware only. Therefore,

if your instrument requires optional measurement personalities, you must reload them from

the CD included with this kit or from the Agilent PSA web site.

NOTE

All user stored files such as instrument states or traces from the original Flash

assembly will be lost.

CAUTION

The following procedure must be done at a static safe work area.

Installation Kit Parts List

Contents of Flash Memory Upgrade Kit

ProductsAffected: ........................ PSAE4440A

PSA E4443A

PSA E4445A

PSA E4446A

PSA E4448A

SerialNumbers:.......................... US00000000/US99999999

MY00000000/MY99999999

ToBePerformedBy: ...................... (X)AgilentServiceCenter

(X) Personnel Qualified by Agilent

(X) Customer

EstimatedInstallationTime: ...............

EstimatedVerificationTime: ...............

1Hour

0.5 Hours

Quantity Description Agilent Part Number

1 64 MB Flash board Not available separately

4 Stand-offs 0380-4163

1 Firmware Update Kit E4440-60087

1 Installation Note this note

4 Installation Note E4440-90072

Tools Required



Microsoft

Windows

based Personal Computer with Local Area Network (LAN) card.



Windows NT

4.0 or greater, Windows



CD-ROM drive



Printer compatible with the PSA or DOS formatted 3.5” floppy disk. (Optional)

The following hand tools are required:

WARNING

This is a Safety Class 1 Product (provided with a protective earthing

ground incorporated in the power cord). The mains plug shall only be

inserted in a socket outlet provided with a protected earth contact. Any

interruption of the protective conductor inside or outside of the

product is likely to make the product dangerous. Intentional

interruption is prohibited.

WARNING

The power cord is connected to internal capacitors that may

remain live for 5 seconds after disconnecting the plug from it’s

power supply.

WARNING

The detachable power cord is the instrument disconnecting device. It

disconnects the mains circuits from the mains supply before other parts

of the instrument. The front panel switch is only a standby switch and is

not a LINE switch (disconnecting device).

WARNING

The opening of covers or removal of parts is likely to expose dangerous

voltages. Disconnect the product from all voltage sources before

starting to open.

WARNING

These servicing instructions are for use by qualified personnel only. To

avoid electrical shock, do not perform any servicing unless you are

qualified to do so.

Microsoft

,Windows

, and Windows NT

are US registered trademarks of Microsoft Corporation.

Description Agilent Part Number

TORX Hand Driver - Size T10 8710-1623

TORX Hand Driver - Size T20 8710-1615

Diagonal cutters N/A

Installation Note E4440-90072 5

Installation Procedure

If the instrument is functioning well enough to view the instrument configurations on screen,

these configurations should be printed or copied down.

The Flash memory board is attached to the CPU assembly, so it is necessary to remove this

assembly. The CPU assembly slides into the instrument from the rear panel, plugs directly

into the motherboard, and is held in place with screws on the CPU plate. The CPU assembly

cannot be removed without removing other assemblies. Perform the following procedures in

order:

1. Remove the instrument outer case.

2. Remove the instrument top brace.

3. Remove the A6 SCSI board.

4. Remove the A7 Digital IF assembly.

5. Remove the A26 CPU assembly.

6. Replace the A26A2 Flash board on the CPU assembly.

7. Install the CPU assembly into the chassis.

8. Install the Digital IF assembly and SCSI board.

9. Install the instrument top brace and outer case.

10.Install the option designators and license keywords (if necessary).

11.Install the option firmware.

Since the Flash memory does not contain calibration data, and the instrument will perform

an auto align when powered up, instrument re-calibration should not be required following

this repair. The installation of the hardware should take about 1 hour to complete.

Installation of optional measurement personalities and re-licensing varies with the number of

options.

For assistance at any time during this procedure, get in touch with your nearest Agilent

Technologies Sales and Service Office. To find your local Agilent office access the following

URL or call the following telephone number:

http://www.agilent.com/find/assist

1-800-452-4844 (8am-8pm EST)

6 Installation Note E4440-90072

Capture Configuration Information (if possible)

NOTE

If the instrument is able to boot and display the softkey menus, it should be

possible to gather information using the following process. This procedure will

provide a record of the options with the associated license keys as well as I/O

configurations for the purpose of installing them into the new 64 MB Flash

board.

1. Power on the PSA.

2. Connect a printer to the PSA. If a printer is unavailable, you can save the configuration

information to the PSA floppy disk (drive A:), then place the floppy in your computer and

print. If there is no way to provide a print out, then you must carefully write down the

instrument information on a piece of paper.

To set up the PSA to save a screen file to the floppy:

insert a DOS formatted floppy into the PSA disk drive.

Press File,Save,Dir Select,choose[-A-],pressDir Select again to read the directory.

Press the Type key and select Screen.PressSave Now.

NOTE

Although you will not need this first saved screen, the process of saving this first

screen enables future screen saves.

3. On the PSA press System,More,More,Licensing,Show License to display the list of loaded

firmware options and their associated license keywords. Press the Print key to print this

list, or press the Save key to save it to a floppy disk, or manually copy the options and the

associated license keys.

4. Press System,More,Show System. Under the Options heading, you can see the designators

for the hardware and firmware options. Hardware options are; 1DS (preamp), B7J

(electronic attenuator), and BAB (APC 3.5 mm connector). Press the Print key to print this

list, or press the Save key to save it to a floppy disk, or manually copy the option

designators.

5. Press System,Configure I/O.PressthePrint key to print this list, or press the Save key to

save it to a floppy disk, or manually copy all softkey labels such as IP Address and Host

Name.

6. If you saved the configuration information to the floppy, print out the files now to assure

they are correct.

Installation Note E4440-90072 7

Instrument Outer Case

CAUTION

If the instrument is placed on its face during any of the following procedures, be

sure to use a soft surface or soft cloth to avoid damage to the front panel, keys, or

input connector.

Removal

1. Disconnect the instrument from ac power.

2. There are two handles on the sides of the instrument that must be taken off. Refer to

Figure 1. Using the T-20 driver, loosen the screws that attach each handle (1). Remove the

handles.

3. Remove the four bottom feet (2). This is done by lifting up on the tabs on the feet, and

sliding the feet in the direction indicated by the arrows.

4. Remove the four screws (3) that hold the rear feet (4) in place.

5. Pull the instrument cover (5) off towards the rear of the instrument.

Figure 1 Instrument Outer Case Removal

8 Installation Note E4440-90072

Top Brace

Removal

1. Using the T-10 driver, remove the top screws (3) (one screw is under the security label)

and the side screws (2) attaching the top brace (1) to the deck. Refer to Figure 2.

2. The top brace can now be removed from the deck.

Figure 2 Top Brace

Installation Note E4440-90072 9

A6 SCSI Board

Removal

1. Refer to Figure 3. At the rear of the instrument, use a T-10 driver to remove the 6 screws

(1) securingthesmallpaneltotheframe.

2. The SCSI board can be removed through the rear panel by pulling up on the board to

disengage it from the CPU board.

Figure 3 SCSI Board Removal

10 Installation Note E4440-90072

A7 Digital IF Assembly

Figure 4 shows the location of the A7 Digital IF assembly in slot 4.

Figure 4 Vertical Board Assembly Locations

Removal

The cables that connect to this assembly do not need to be removed since you are going to pull

the assembly out of the chassis and lay it down on the instrument. Use the board ejectors

located on the Digital IF assembly to carefully pull it out of the chassis.

If there are any other assemblies in slots 2 and 3, remove them now.

Otros manuales para PSA Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Agilent Technologies

Agilent Technologies

Agilent Technologies E4991A Manual de usuario

Agilent Technologies

Agilent Technologies 1290 Infinity II Manual de usuario

Agilent Technologies

Agilent Technologies Agilent 4396B Manual de usuario

Agilent Technologies

Agilent Technologies 4100 Manual de usuario

Agilent Technologies

Agilent Technologies PSA Series Manual de instalación y operación

Agilent Technologies

Agilent Technologies 1290 Infinity II 2D-LC Solution Manual de usuario

Agilent Technologies

Agilent Technologies U3051C Manual del propietario

Agilent Technologies

Agilent Technologies N1913a Manual de usuario

Agilent Technologies

Agilent Technologies 16712A Guía de referencia

Agilent Technologies

Agilent Technologies 3200P Manual de usuario

Agilent Technologies

Agilent Technologies E5071C Manual de usuario

Agilent Technologies

Agilent Technologies 4294A Manual del propietario

Agilent Technologies

Agilent Technologies 8960 Manual de usuario

Agilent Technologies

Agilent Technologies N4373A Manual de usuario

Agilent Technologies

Agilent Technologies 622Vu Advisor Manual de usuario

Agilent Technologies

Agilent Technologies 35670A Manual

Agilent Technologies

Agilent Technologies J2300D Manual de lista de piezas

Agilent Technologies

Agilent Technologies E5072A ENA Series Manual de usuario

Agilent Technologies

Agilent Technologies 6890 Series Manual de instrucciones

Agilent Technologies

Agilent Technologies InfiniiVision 6000 Series Manual de usuario

Agilent Technologies

Agilent Technologies K6460 Manual de instalación y funcionamiento

Agilent Technologies

Agilent Technologies PSA Series Manual de usuario

Agilent Technologies

Agilent Technologies 85301B Manual de usuario

Agilent Technologies

Agilent Technologies G6600 Guía

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario