Agilent Technologies 3200P Manual de usuario
Agilent Technologies
Agilent 3200P
pH Meter
pH 计
User Guide
用户手册
⋠
⋠
⋠
⋠
3200P pH Meter User Guide
Notices
© Agilent Technologies, Inc. 2012
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Agilent
Technologies, Inc. as governed by United
States and international copyright laws.
Manual Part Number
5973-1775
Edition
First edition, March 2012
Printed in China
Agilent Technologies, Inc.
412 Ying Lun Road
Shanghai 200131 P.R. China
Warranty
The material contained in this docu-
ment is provided “as is,” and is sub-
ject to being changed, without notice,
in future editions. Further, to the max-
imum extent permitted by applicable
law, Agilent disclaims all warranties,
either express or implied, with regard
to this manual and any information
contained herein, including but not
limited to the implied warranties of
merchantability and fitness for a par-
ticular purpose. Agilent shall not be
liable for errors or for incidental or
consequential damages in connec-
tion with the furnishing, use, or per-
formance of this document or of any
information contained herein. Should
Agilent and the user have a separate
written agreement with warranty
terms covering the material in this
document that conflict with these
terms, the warranty terms in the sep-
arate agreement shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
Restricted Rights Legend
U.S. Government Restricted Rights. Soft-
ware and technical data rights granted to
the federal government include only those
rights customarily provided to end user cus-
tomers. Agilent provides this customary
commercial license in Software and
technical data pursuant to FAR 12.211
(Technical Data) and 12.212 (Computer Soft-
ware) and, for the Department of Defense,
DFARS 252.227-7015 (Technical Data -Com-
mercial Items) and DFARS 227.7202-3
(Rights in Commercial Computer Software
or Computer Software Documentation).
Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an oper-
ating procedure, practice, or the
like that, if not correctly performed
or adhered to, could result in
damage to the product or loss of
important data. Do not proceed
beyond a CAUTION notice until the
indicated conditions are fully
understood and met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could result
in personal injury or death. Do not
proceed beyond a WARNING
notice until the indicated condi-
tions are fully understood and
met.
安捷伦科技 （上海）有限公司
上海市浦东新区外高桥保税区
英伦路 412 号
系电话：（800）820 3278
3200P pH Meter User Guide 3
Contents
1 Installation 5
Tools and Components Needed for Installation 6
Installing the 3200P pH Meter 7
Installing the Power Adaptor 9
Installing the Ground Line 10
Installing the Electrochemical Data Collecting Software 10
More Information 10
2 Operation 11
Introduction 12
Safety Information 14
Agilent Customer Portal 15
Term Definitions 16
Features 17
Specifications 18
The Operating Panel 19
Display 19
Keypad 19
Instrument control 21
Setting Up the pH Meter 22
To start up the 3200P pH Meter 22
Accessing setup parameters 23
To manually set the solution temperature 27
To set up the system (System Setup) 29
To select the display language 31
To set the meter to turn off automatically (Auto Power Off) 31
43200P pH Meter User Guide
Using the pH Meter 32
To prepare an electrode for use 32
To adjust mV zero 33
To calibrate pH electrode (Calib pH EC) 36
To measure pH value 39
To measure mV value 40
To measure temperature 40
To turn off the 3200P pH Meter 40
Storing Data 41
To delete saved data 41
To output data 41
Viewing Parameters During Measurement 42
To view saved data 43
To view last calibrated data 45
Software Operation 47
To install the software 47
To run software 47
3 Troubleshooting and Maintenance 49
Troubleshooting Common Problems 50
General Troubleshooting Procedure 52
Check the temperature measurement 52
Check the potential (mV) value 53
Check the pH value 53
Restore factory default settings 54
Meter Self-Diagnostics and Messages 56
Severe errors 56
Error warning 57
Maintenance 59
Electrode cleaning 59
Electrode storage 59
5
Agilent Technologies
Agilent 3200P pH Meter
User Guide
1
Installation
Tools and Components Needed for Installation 6
Installing the 3200P pH Meter 7
Installing the Power Adaptor 9
Installing the Ground Line 10
Installing the Electrochemical Data Collecting Software 10
More Information 10
Use the tools and accessories shipped with 3200P pH Meter
during installation.
63200P pH Meter User Guide
1 Installation
Tools and Components Needed for Installation
Agilent provides the special tools needed for installation. You
can find the following parts in the shipping case of the pH
Meter (Meter Kit).
•Electrode holder (G4389A)
•Electrode, for example P3211 pH combination electrode
(5190- 3988)
•Power adapter (5185- 8389)
Installation 1
3200P pH Meter User Guide 7
Installing the 3200P pH Meter
Open the meter kit package case. Remove the pH Meter,
multifunction electrode holder, and other parts.
The sockets for the pH electrode and ATC probe are on the
back panel of the meter. Insert the connectors of the pH
electrode and ATC probe (5190- 3998) into their respective
sockets. See Figure 6 on page 13. Run the electrode cables
along the electrode holder as shown in Figure 2 on page 8.
Figure 1 Installing the Electrode holder
Large nut
Small nut
Flexible arm
Small nut
Electrode holder
Large nut
Electrode holder base
Setscrew
83200P pH Meter User Guide
1 Installation
Figure 2 Installing the electrodes
Installation 1
3200P pH Meter User Guide 9
Installing the Power Adaptor
The universal power adapter that is included with the meter
is the only power adapter recommended for use with this
unit.
The external electrical power adapter is rated at 100 to
240 VAC, 1 A, 50/60 Hz.
This power adaptor provides a plug converter which
supports several kinds of plugs. Choose the appropriate
power plug. Connect the output plug of the power adapter to
the power input on the meter. A click will be heard when
the plug is properly engaged.
Figure 3 Installing the Power Adaptor
10 3200P pH Meter User Guide
1 Installation
Installing the Ground Line
The meter ships with an optional ground line. During use, if
another device (such as a constant temperature bath) causes
electrical interference and an unstable reading, install the
ground line. Connect one terminal of the ground line to the
meter ground socket ( ) and the other terminal to the
interference source.
Installing the Electrochemical Data Collecting Software
The optional G4390A software provides communications
between the meter and a computer. To input data to a
computer, install the Electrochemical Data Collecting
Software on a computer. Connect the computer to the meter
with a USB cable. See the G4390A software documentation
for more information.
If not using the G4390A software, Agilent provides
downloadable data printing software on the Agilent
Customer Portal (see “Agilent Customer Portal ” on
page 15). To use this software, download it from the portal
and install it. Then connect the meter to the PC using the
USB cable. Refer to the data printing software
documentation for more information
More Information
For more information, visit the Agilent website at
http://www.agilent.com/chem. See also the instructions
provided with each electrode.
Tabla de contenidos
Otros manuales de Instrumento de medición de Agilent Technologies
Agilent Technologies
Agilent Technologies U2722A Manual de usuario
Agilent Technologies
Agilent Technologies E5062A ENA-L Series Guía de inicio rápido
Agilent Technologies
Agilent Technologies FieldFox N9912A Manual de usuario
Agilent Technologies
Agilent Technologies G8610A Manual de usuario
Agilent Technologies
Agilent Technologies 8753ET Manual de usuario
Agilent Technologies
Agilent Technologies 8719ET Manual de usuario
Agilent Technologies
Agilent Technologies ESA-E Series Manual de usuario
Agilent Technologies
Agilent Technologies ENA Series Manual de usuario
Agilent Technologies
Agilent Technologies B1500A Manual de usuario
Agilent Technologies
Agilent Technologies 3588A Manual de usuario
Agilent Technologies
Agilent Technologies 16753A Manual de usuario
Agilent Technologies
Agilent Technologies 16517A Manual de servicio
Agilent Technologies
Agilent Technologies 4500 Series Manual de usuario
Agilent Technologies
Agilent Technologies 4291B Manual de usuario
Agilent Technologies
Agilent Technologies NFA Series Manual de uso y cuidado
Agilent Technologies
Agilent Technologies N4962A Manual de usuario
Agilent Technologies
Agilent Technologies Agilent 4396B Manual de usuario
Agilent Technologies
Agilent Technologies N1913a Manual de usuario
Agilent Technologies
Agilent Technologies 1680 series Manual de usuario
Agilent Technologies
Agilent Technologies EPM-P Series Instrucciones de funcionamiento
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario