Agilent Technologies 2100 Bioanalyzer System Manual de instalación y funcionamiento

Agilent Technologies

Agilent 2100 Bioanalyzer

System

Installation and Safety Guide

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from Agi-

lent Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

G2938-90016 Rev. B

Edition

01/2018

Printed in Germany

Agilent Technologies

Hewlett-Packard-Strasse 8

76337 Waldbronn

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or sub-

contract, Software is delivered and licensed

as “Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995),

or as a “commercial item” as defined in

FAR 2.101(a) or as “Restricted computer

software” as defined in FAR 52.227-19

(June 1987) or any equivalent agency regu-

lation or contract clause. Use, duplication

or disclosure of Software is subject to Agi-

lent Technologies’ standard commercial

license terms, and non-DOD Departments

and Agencies of the U.S. Government will

receive no greater than Restricted Rights as

defined in FAR 52.227-19(c)(1-2) (June

1987). U.S. Government users will receive

no greater than Limited Rights as defined in

FAR 52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could

result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION

notice until the indicated condi-

tions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice,

or the like that, if not correctly

performed or adhered to, could

result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indi-

cated conditions are fully

understood and met.

For Research Use Only

Not for use in diagnostic procedures

Contents

1 Safety Information 5

Power Cords 7

Operation 8

Safety Symbols 9

Laser Safety 10

Chemical and Biological Safety 11

Legal Notice 13

2 Site Requirements for the 2100 Bioanalyzer Instrument 65

Power Considerations 66

Bench space 67

Environment 68

Sound Emission 69

The Waste Electrical and Electronic Equipment (WEEE) directive 70

Physical Specifications of the 2100 Bioanalyzer Instrument 71

3 Unpacking the 2100 Bioanalyzer System 73

Damaged Packaging 74

4 Installing the 2100 Bioanalyzer System 77

Setting up your PC 78

Setting up the 2100 Bioanalyzer Instrument 79

Contents

5 Starting the 2100 Bioanalyzer Instrument 81

Turning on the 2100 Bioanalyzer Instrument 82

Connecting the Instrument via the USB/Serial Cable 83

Starting the 2100 Expert Software 84

Preparing the Assay 85

6 Maintenance of the 2100 Bioanalyzer Instrument 87

7 Spare Parts and Accessories 89

Agilent Technologies

Safety Information

Power Cords 7

Operation 8

Safety Symbols 9

Laser Safety 10

Chemical and Biological Safety 11

Legal Notice 13

The following general safety precautions must be observed during all phases of

operation, service, and repair of the Agilent 2100 Bioanalyzer instrument.

All safety instructions should be read and understood before installation,

operation and maintenance of the instrument. Failure to comply with these

precautions or with specific warnings elsewhere in this manual violates safety

standards of design, manufacture and intended use of the instrument.

Agilent Technologies assumes no liability for the customer’s failure to comply

with these requirements.

WARNING

A WARNING notice denotes a hazard.

It calls attention to an operating procedure, practice, or the like that, if not correctly

performed or adhered to, could result in personal injury or death.

➔Do not proceed beyond a WARNING notice until the indicated conditions are fully

understood and met.

Safety Information

CAUTION

A CAUTION notice denotes a hazard.

It calls attention to an operating procedure, practice, or the like that, if not correctly

performed or adhered to, could result in damage to the product or loss of important

data.

➔Do not proceed beyond a CAUTION notice until the indicated conditions are fully

understood and met.

NOTE

Instrument Safety: This is a Safety Class I instrument (provided with a terminal for

protective grounding) and has been manufactured and tested according to international

safety standards.

Safety Information

Power Cords

Different power cords are offered as options with the Agilent 2100 Bioanalyzer

instrument. The female end of all power cords is identical. It plugs into the

power-input socket at the rear of the instrument. The male end of each power

cord is different and designed to match the wall socket of a particular country

or region.

WARNING

Electric Shock

The absence of ground connection and the use of an unspecified power cord can

lead to electric shock or short circuit.

➔Never operate your instrument from a power outlet that has no ground connection.

➔Never use a power cord other than the Agilent Technologies power cord designed

for your region.

➔Never use cables other than those supplied by Agilent Technologies to ensure

proper functionality and compliance with safety or EMC regulations.

Safety Information

Operation

Before the instrument is switched on, all protective ground terminals,

extension cords, auto-transformers, and devices connected to it must be

connected to a protective ground socket. Any interruption of the protective

grounding will cause a potential shock hazard that could result in serious

personal injury. Whenever it is likely that the protection has been impaired,

the instrument must be made inoperative and be secured against any intended

operation.

To operate the instrument safely:

•Do not remove any cover of the Agilent 2100 Bioanalyzer instrument.

•Avoid any maintenance of the instrument under voltage.

•Do not let liquid drip into the instrument. It could cause a shock or it could

damage the instrument.

•Do not replace components of the instruments (e.g. electrode cartridge)

with power turned on.

•Do not operate the instrument in the presence of flammable gases or fumes.

Operation of any electrical instrument in such an environment constitutes a

definite safety hazard.

•Do not install substitute parts or make any unauthorized modification to

the instrument.

WARNING

Ensure the proper usage of the equipment

The protection provided by the equipment may be impaired.

➔The operator of this instrument is advised to use the equipment in a manner as

specified in this manual.

Safety Information

Safety Symbols

Symbol Description

Electrosensitive device.

The apparatus is marked with this symbol when the user should refer to the Installation and Safety

Manual in order to prevent risk of harm to the operator and to protect the apparatus against damage.

Indicates dangerous voltages.

Indicates a protected ground terminal.

Laser Radiation. When open avoid exposure to beam.

Safety Information

Laser Safety

The Agilent 2100 Bioanalyzer instrument is classified as a "Laser Class 1"

product (IEC825-1, CFR1040.10). During normal operation of the instrument,

no laser light is accessible to the user.

When the laser is in use, the laser light source emits light at a power that may

be harmful to the eyes. To prevent operator exposure to potentially harmful

laser light, an interlock mechanism turns off the laser whenever the lid of the

Agilent 2100 Bioanalyzer instrument is not closed. Furthermore, the lid can't

be completely opened and has a black light absorbing surface in order to

prevent any potential laser light reflection.

WARNING

Harmful laser light

The laser light source emits light at a power that may be harmful to the eyes.

➔Never look into the beam or direct it towards someone else.

➔System interlocks should never be disabled.

Otros manuales para 2100 Bioanalyzer System

Tabla de contenidos

Idiomas:

Otros manuales de Instrumento de medición de Agilent Technologies

Agilent Technologies

Agilent Technologies J2300D Manual de lista de piezas

Agilent Technologies

Agilent Technologies X Series Manual de usuario

Agilent Technologies

Agilent Technologies 4200 FlexScan Manual de usuario

Agilent Technologies

Agilent Technologies N6705 Manual de usuario

Agilent Technologies

Agilent Technologies 490 Manual de usuario

Agilent Technologies

Agilent Technologies 8753ET Manual de usuario

Agilent Technologies

Agilent Technologies 77-4 Instrucciones de instalación y funcionamiento

Agilent Technologies

Agilent Technologies PSA Series Manual de instalación y operación

Agilent Technologies

Agilent Technologies ESA-E Series Manual del propietario

Agilent Technologies

Agilent Technologies 4352B Manual de usuario

Agilent Technologies

Agilent Technologies J3919A Manual de operación

Agilent Technologies

Agilent Technologies E5070A ENA Series Manual de usuario

Agilent Technologies

Agilent Technologies 4263B Manual de usuario

Agilent Technologies

Agilent Technologies EMC Series Manual

Agilent Technologies

Agilent Technologies 4156b Manual de usuario

Agilent Technologies

Agilent Technologies TS-5410 Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 16901A Manual de usuario

Agilent Technologies

Agilent Technologies U2722A Manual de usuario

Agilent Technologies

Agilent Technologies 8753ES Manual de usuario

Agilent Technologies

Agilent Technologies 4339B Manual de usuario

Agilent Technologies

Agilent Technologies 4294A Manual del propietario

Agilent Technologies

Agilent Technologies ESA-E E4402B Manual de usuario

Agilent Technologies

Agilent Technologies N9030A Manual de usuario

Agilent Technologies

Agilent Technologies HP 5890 II Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario