Agilent Technologies 16901A Manual de usuario

Agilent Technologies

Agilent 16901A

Logic Analysis System

Service Guide

Notices

2011

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from Agi-

lent Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

16901-97002

Edition

Third edition, November 2011

Printed in Malaysia

Agilent Technologies, Inc.

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or sub-

contract, Software is delivered and

licensed as “Commercial computer soft-

ware” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Agilent Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S. Gov-

ernment will receive no greater than

Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S. Govern-

ment users will receive no greater than

Limited Rights as defined in FAR 52.227-14

(June 1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and met.

2 16901A Logic Analysis System Service Guide

Trademark Acknowledgements

Windows and MS Windows are U.S. regis-

tered trademarks of Microsoft Corporation.

Windows XP is a U.S. registered trademark

of Microsoft Corporation.

16901A Logic Analysis System Service Guide 3

The Agilent 16901A Logic Analysis System—At a Glance

The Agilent Technologies 16901A logic analysis system is a

modular system.

Features

•Two slots for logic analyzers and other types of

measurement modules.

•Multiframe Pro for making time- correlated measurements

with a logic analysis system made up of multiple 16900A,

16901A, and 16902A frames.

•Built- in 15 inch TFT color touch screen LCD display,

1,024 x 768 (XGA) resolution.

•250 GB hard disk drive (or external hard drive 16901A

Option 109).

•10/100 Base- T LAN port.

•USB 2.0 ports (six total, two on front, four on back).

•One PCI expansion slot.

•One PCI Express x1 expansion slot.

•Windows® XP Professional operating system. Windows 7

operating system on logic analyzers with serial numbers

MY50370000 or higher.

•Agilent Logic Analyzer application which takes the

complexity out of making logic analyzer measurements.

You can perform all operations directly from one window.

4 16901A Logic Analysis System Service Guide

Supplied Accessories

•PS2 mouse.

•PS2 keyboard.

•Accessory pouch and power cord.

Optional Accessories:

•Multiframe cable (E5861A).

•Probes.

Service Strategy

The service strategy for this instrument is the replacement

of defective assemblies. This service guide contains

information for finding a defective assembly by testing and

servicing the 16901A logic analysis system.

This instrument can be returned to Agilent Technologies for

all service work, including troubleshooting. Contact your

nearest Agilent Technologies Sales Office for more details.

Contacting Agilent Technologies

To locate a sales or service office near you, go to

www.agilent.com/find/contactus.

16901A Logic Analysis System Service Guide 5

In this Service Guide

This book is the service guide for the 16901A logic analysis

system and is divided into eight chapters.

Chapter 1, “General Information” contains information about

the instrument’s characteristics.

Chapter 2, “Preparing for Use” tells how to prepare the

instrument for use.

Chapter 3, “Testing Performance” gives instructions on how

to test the performance of the instrument.

Chapter 4, “Calibrating and Adjusting” contains calibration

instructions for the instrument.

Chapter 5, “Troubleshooting” contains self- tests and

flowcharts for troubleshooting the instrument.

Chapter 6, “Replacing Assemblies” tells how to replace the

instrument and assemblies of the instrument, and how to

return them to Agilent Technologies.

Chapter 7, “Replaceable Parts” lists replaceable parts, shows

exploded views, and gives ordering information.

Chapter 8, “Theory of Operation” explains how the

instrument works and what the self- tests are checking.

Revision History

Table 1 Revision History

Revision Reason

16901-97002, November 2011

(this version)

Changes in replaceable part numbers and the

recovery procedure for the 16901A logic

analysis systems that are shipped with

Windows 7 installation (serial numbers

MY50370000 or greater)

16901-97001, June 2007 Corrected module interface board (MIB) part

number.

16901-97000, November 2006 First edition.

6 16901A Logic Analysis System Service Guide

16901A Logic Analysis System Service Guide 7

Contents

The Agilent 16901A Logic Analysis System—At a Glance 3

In this Service Guide 5

1 General Information

Electrical and Operating Environment Characteristics 12

Dimensions 14

2 Preparing for Use

To inspect the logic analysis system 16

To apply power 16

To connect multiple frames 17

To install measurement modules 17

To clean the instrument 17

3 Testing Performance

Self-Tests 20

Te s t I n t e r v a l 20

To perform the power-up tests 21

4 Calibrating and Adjusting

Calibration Strategy 24

Calibrations and Adjustments for Modules 24

5 Troubleshooting

To use the 16901A troubleshooting flowcharts 26

To troubleshoot power problems 32

Power Supplies 32

To check the power supply voltages 32

To run the self-tests 35

To exit the test system 36

8 16901A Logic Analysis System Service Guide

Contents

To restore the system software 37

On a Legacy 16901A Series Logic Analysis system with Windows XP

Installation 37

On a 16901A Series Logic Analysis system with Windows 7

Installation 37

Contacting Agilent Service/Support 41

6 Replacing Assemblies

16901A Logic Analysis System Disassembly/Assembly 44

Replacement Strategy 44

Tools Require d 44

To save the license file 45

To prepare the instrument for disassembly 46

To power off the system 46

To remove and replace optional modules or filler panels 48

To remove and replace the cover 50

To remove and replace the power supplies 51

600 watt power supply 51

Secondary power supply 52

To remove and replace the PCI or display board 54

To remove and replace the motherboard 55

To remove and replace the front panel assembly 57

To remove and replace the backlight inverter board 59

To remove and replace the touch screen controller board 61

To remove and replace the front panel bracket assembly 62

To remove and replace the USB cables 63

To remove and replace the display assembly 64

To remove and replace the keypad and keypad board 66

To replace the hard disk drive 68

If you have a 16901 series Logic Analysis system with Windows XP

installation 68

If you have a 16901 series Logic Analysis system with Windows 7

installation 68

To remove and replace the tray assembly 69

To remove and replace the fans 70

60 mm fan 70

92 mm fans 71

To remove and replace the line filter assembly 72

16901A Logic Analysis System Service Guide 9

Contents

To replace the module interface board 73

Returning Assemblies 74

7 Replaceable Parts

Ordering Replaceable Parts 76

Exchange Assemblies 76

Power Cables and Plug Configurations 77

Replaceable Parts List 79

Cover and Front Panel Assemblies 80

16901A Frame 83

8 Theory of Operation

Block Level Theory 88

CPU Subsystem 91

PCI board 92

MIB (Module Interface Board) 92

Front Panel Assembly 95

Power Up Routine 96

Index

10 16901A Logic Analysis System Service Guide

Contents

Tabla de contenidos

Otros manuales de Instrumento de medición de Agilent Technologies

Agilent Technologies

Agilent Technologies E8362A PNA Series Guía de inicio rápido

Agilent Technologies

Agilent Technologies 35670A Manual de usuario

Agilent Technologies

Agilent Technologies N9010A Manual de usuario

Agilent Technologies

Agilent Technologies N9320B Manual de usuario

Agilent Technologies

Agilent Technologies N9344C Manual de usuario

Agilent Technologies

Agilent Technologies E4915A Manual de usuario

Agilent Technologies

Agilent Technologies 16517A Manual de servicio

Agilent Technologies

Agilent Technologies E2730A Manual de usuario

Agilent Technologies

Agilent Technologies 89410A Manual de usuario

Agilent Technologies

Agilent Technologies E4440A Guía de inicio rápido

Agilent Technologies

Agilent Technologies 8753ET Manual de usuario

Agilent Technologies

Agilent Technologies 8719D Manual de usuario

Agilent Technologies

Agilent Technologies E5071C Manual de usuario

Agilent Technologies

Agilent Technologies 4294A Manual de usuario

Agilent Technologies

Agilent Technologies 4100 Manual de usuario

Agilent Technologies

Agilent Technologies 86122A Manual de usuario

Agilent Technologies

Agilent Technologies PSA Series Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies B1500A Guía de instalación

Agilent Technologies

Agilent Technologies N4962A Manual de usuario

Agilent Technologies

Agilent Technologies 34136A Manual de usuario

Agilent Technologies

Agilent Technologies 4395A Manual del propietario

Agilent Technologies

Agilent Technologies U1211A Manual de usuario

Agilent Technologies

Agilent Technologies FieldFox N9912A Manual de usuario

Agilent Technologies

Agilent Technologies N2797A Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario