Agilent Technologies 4200 FlexScan Manual de usuario

Agilent 4200 FlexScan

FTIR

Operation Manual

2 Agilent 4200 FlexScan FTIR Operation Manual

Notices

2011, 2013

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Agilent Technologies, Inc. as governed

by United States and international

Manual Part Number

0024-401

Edition

Third edition, May 2013

Printed in Malaysia

Agilent Technologies, Inc.

Errata Statement

NOTICE: This document contains

references to A2 Technologies. Please

note that A2 Technologies is now part

of Agilent Technologies. For more

information, go to

www.agilent.com/chem

Warranty

The material contained in this

document is provided “as is,” and is

subject to being changed, without

notice, in future editions. Further, to

the maximum extent permitted by

applicable law, Agilent disclaims all

warranties, either express or implied,

with regard to this manual and any

information contained herein,

including but not limited to the

implied warranties of merchantability

and fitness for a particular purpose.

Agilent shall not be liable for errors

or for incidental or consequential

damages in connection with the

furnishing, use, or performance of

this document or of any information

contained herein. Should Agilent and

the user have a separate written

agreement with warranty terms

covering the material in this

document that conflict with these

terms, the warranty terms in the

separate agreement shall control.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.

Restricted Rights Legend

If software is for use in the

performance of a U.S. Government

prime contract or subcontract,

Software is delivered and licensed as

“Commercial computer software” as

defined in DFAR 252.227-7014 (June

1995), or as a “commercial item” as

defined in FAR 2.101(a) or as

“Restricted computer software” as

defined in FAR 52.227-19 (June 1987)

or any equivalent agency regulation or

contract clause. Use, duplication or

disclosure of Software is subject to

Agilent Technologies’ standard

commercial license terms, and non-

DOD Departments and Agencies of the

U.S. Government will receive no

greater than Restricted Rights as

defined in FAR 52.227-19(c)(1-2) (June

1987). U.S. Government users will

receive no greater than Limited Rights

as defined in FAR 52.227-14 (June

1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Safety Notices

A CAUTION notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION notice

until the indicated conditions are fully

understood and met.

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or the

like that, if not correctly performed or

adhered to, could result in personal

injury or death. Do not proceed

beyond a WARNING notice until the

indicated conditions are fully

understood and met.

WARNING

CAUTION

Contents

Agilent 4200 FlexScan FTIR Operation Manual 3

Contents

1. Introduction 5

2. Getting Started 9

Unpacking 9

Packing list 10

Components 11

Installing the battery12

Power switch LED status 13

Starting the software 14

Charging the handheld PC 15

Logging on to MicroLab Mobile for the first time 15

Performance verification 16

Diagnostic values 17

Performance validation 19

3. Analyzing Samples 23

External reflectance, grazing angle and diffuse reflectance 23

Reflectance standards and gain settings 24

Steps 25

Collecting a background spectrum 25

Collecting a sample spectrum 26

Internal reflectance (ATR) 27

Steps 28

Cleaning the sample probe 28

Collecting a background spectrum 29

Contents

4 Agilent 4200 FlexScan FTIR Operation Manual

Collecting a sample spectrum 30

Using the solid sample ATR press 31

4. Maintenance 35

5. Spare Parts 37

6. Specifications 39

Technical 39

Environmental conditions 40

Handheld PC data station 40

Introduction

Agilent 4200 FlexScan FTIR Operation Manual 5

1. Introduction

The Agilent 4200 FlexScan FTIR instrument is a portable, handheld,

battery-operated analyzer designed to measure a variety of solid and

liquid samples in locations difficult or impossible to analyze in a

laboratory. It can be used for quantitative or qualitative analysis of

materials. The system is small, lightweight and packaged in a

weather-resistant enclosure suitable for outdoor use. It comes

standard with internal battery power for operation of up to 4 hours.

The 4200 FlexScan FTIR can be safely used in operating

temperatures ranging from 0 to 50 degrees Celsius (32 to 122 degrees

Fahrenheit) and in humidity environments as high as 95% for

extended periods of time.

WARNING

Fire Hazard

4200 FlexScan FTIR systems are NOT intrinsically safe. Use the system only

in atmospheres that have been tested for flammable materials. If the

equipment is used in a manner not specified in this manual, the protection

provided by the equipment may be impaired.

Introduction

6 Agilent 4200 FlexScan FTIR Operation Manual

CAUTION Although the 4200 FlexScan FTIR system is designed to withstand significant

shock and vibration found in a field environment, use caution when handling and

avoid dropping the system when it is out of the shipping case. Dropping the

system may result in equipment failure.

The 4200 FlexScan FTIR uses technology known as Fourier transform

infrared (FTIR) spectroscopy, which is the current state-of-the-art

technique for molecular compound identification and quantification.

FTIR uses an infrared (IR) light source to pass through the sample

and onto a detector, which precisely measures the amount of light

absorbed by the sample. This absorbance creates a unique spectral

fingerprint that is used to identify the molecular structure of the

sample and determine the exact quantity of a particular compound in

a mixture. In addition to the capability to measure samples onsite

that in the past were typically measured in the lab, this system is a

non-destructive tool (NDT) that allows the analysis to be performed

without damaging the sample.

The heart of the Agilent FTIR spectrometer system is a patented

Michelson interferometer design mounted on shock-dampening

mechanisms to protect the components from shock and vibration in

the field. This proprietary design is the key to successfully making

FTIR technology compact, lightweight, rugged and field-portable.

The 4200 FlexScan FTIR system can be configured for a number of

different sampling configurations to accommodate the analysis of a

range of liquids, solids, powders, pastes and gels. Information on the

optimal use of the different sampling configurations of the 4200

FlexScan system is listed in the following categories:

Introduction

Agilent 4200 FlexScan FTIR Operation Manual 7

Agilent 4200 FlexScan FTIR External Reflectance System: For

the chemical analysis of solid or hard surface samples, especially

thickness measurement of thin coatings and films on reflective

surfaces. Typical applications include thickness measurement,

analysis of anodization of metals, and measurement of surface

cleanliness. The External Reflectance System uses a 45 degree

specular reflectance probe or a grazing angle specular reflectance

probe. The 45 degree probe is optimal for analysis of thin films

greater than 1 micron in thickness. Specular reflectance is an

ideal method for the analysis of surface contamination.

Agilent 4200 FlexScan FTIR Grazing Angle System: The grazing

angle sample interface works in a similar manner to the external

reflectance sample interface; however, the angle of incidence is

82 degrees. The increased angle of incidence increases. The

grazing angle probe is optimal for analysis of ultra thin films less

than 1 micron in thickness. The grazing angle probe should be

used when very low level contamination needs to be analyzed

(nanometer thickness levels).

Agilent 4200 FlexScan FTIR Internal Reflectance System: For

the chemical analysis of liquids, powders, pastes and gels. The

Internal Reflectance System uses a diamond optical sampling

probe that incorporates the attenuated total reflectance (ATR)

technique. This method is optimal for the identification of a

variety of samples and has the advantage that no sample

preparation is required to obtain the proper IR absorbance

levels. The diamond ATR probe for the 4200 FlexScan FTIR is a

single reflection ATR. The single reflection ATR sampling

technique is ideal for identification of thick or highly-absorbing

samples where small IR pathlengths are required (typically

2 micron depth of penetration).

Introduction

8 Agilent 4200 FlexScan FTIR Operation Manual

The 4200 FlexScan FTIR is equipped with a handheld PC (Socket

PDA) as standard and can be interfaced to the optional laptop

computer for development of new methods and for detailed viewing

and manipulating the spectra. The 4200 FlexScan software user

interface is intuitive, simple to use and requires no specialized

technical training. The spectral display is represented with easy to

read status bars and report formats, which increase ease of use on

the smaller handheld PC display. With the touch of a button, the

system provides valuable information about the identity and amount

of chemical substances present in a material.

Getting Started

Agilent 4200 FlexScan FTIR Operation Manual 9

2. Getting Started

Unpacking 9

Components 11

Installing the battery 12

Power switch LED status 13

Starting the software 14

Performance verification 16

Unpacking

To unpack your spectrometer system:

1After receiving the Agilent 4200 FlexScan FTIR delivery, do not

immediately open the shipping container. Instead, place the

shipping case in a room-temperature environment and allow

several hours for the contents of the container to reach the room

ambient temperature. This is to avoid unnecessary condensation

on the components prior to the initial setup and installation

process.

Your 4200 FlexScan FTIR has been packed to ensure that it

arrives at your facility ready to go to work. Custom foam inserts

protect the instrument from damage during travel. Whenever

your instrument is shipped via common carrier, it needs to be re-

packed in the shipping case. Using this case, your 4200 FlexScan

can be removed and re-packed in the case in a matter of seconds,

while maintaining instrument security.

Getting Started

10 Agilent 4200 FlexScan FTIR Operation Manual

2The shipping enclosure should contain the standard items listed

below as well as any optional items ordered. Inspect the

enclosure closely to make sure all items have been removed from

the shipment packaging. Also ensure that all the items in the

packing list below have arrived undamaged and are in good

working condition. Contact Agilent immediately if any items are

found to be missing or damaged in shipment.

NOTE Keep all original packing material for storing, shipping and transporting the

system in the future.

3Remove the 4200 FlexScan FTIR system from its shipping case

and place it on its side on a flat, stable surface. The instrument

must be kept away from hot surfaces and any sources of

electromagnetic interference.

Packing list

Plastic shipping case

One Agilent 4200 FlexScan FTIR spectrometer system

One Agilent 4200 FlexScan FTIR mirrored reference cap

One Agilent 4200 FlexScan FTIR diffuse reference cap

One Agilent 4200 FlexScan FTIR polystyrene frequency check

standard

Two Agilent 4200 FlexScan FTIR Li-ion batteries

One Agilent 4200 FlexScan FTIR Operation Manual

One Agilent MicroLab Software Operation Manual

One Socket handheld PC system (PDA)

One Agilent 4200 FlexScan FTIR wrist strap

One shipping container

Tabla de contenidos

Otros manuales de Instrumento de medición de Agilent Technologies

Agilent Technologies

Agilent Technologies 8753ET Manual de usuario

Agilent Technologies

Agilent Technologies E5270 Series Manual de usuario

Agilent Technologies

Agilent Technologies ESA-E Series Manual

Agilent Technologies

Agilent Technologies 8753ES Manual de usuario

Agilent Technologies

Agilent Technologies ENA Series Manual de usuario

Agilent Technologies

Agilent Technologies 85103F Manual de usuario

Agilent Technologies

Agilent Technologies 8510C Manual de usuario

Agilent Technologies

Agilent Technologies 16441A R-Box Manual de usuario

Agilent Technologies

Agilent Technologies 4155C Manual de instalación

Agilent Technologies

Agilent Technologies X Series Manual de usuario

Agilent Technologies

Agilent Technologies 8757D Manual de instalación y operación

Agilent Technologies

Agilent Technologies PSA Series Manual de instalación y operación

Agilent Technologies

Agilent Technologies 8753ET Manual de usuario

Agilent Technologies

Agilent Technologies E4991A Manual de usuario

Agilent Technologies

Agilent Technologies G6600 Guía

Agilent Technologies

Agilent Technologies J2126A Manual de usuario

Agilent Technologies

Agilent Technologies 85051B Manual

Agilent Technologies

Agilent Technologies Cary Eclipse Manual de usuario

Agilent Technologies

Agilent Technologies N1996A-503 Manual de servicio

Agilent Technologies

Agilent Technologies 8712ET Manual de usuario

Agilent Technologies

Agilent Technologies N7745A Manual de usuario

Agilent Technologies

Agilent Technologies FieldFox N9912A Manual de usuario

Agilent Technologies

Agilent Technologies N6705 Manual de usuario

Agilent Technologies

Agilent Technologies Flow Tracker Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario