Agilent Technologies OmnoBER 725 Manual de usuario

Quick Start Guide

Printed in U.K. 11/00

J1409-90001

In This Book

This guide tells you about the front panel

key functions, the indicators and the

connectors.

Agilent Technologies Limited

Telecommunications Networks Test Division

South Queensferry

West Lothian, Scotland EH30 9TG

Technologies Limited

Reproduction, adaption, or

translation without prior

written permission is

prohibited, except as

allowed under the

Agilent Part No.

J1409-90001

Printed in U.K. 11/00

Documentation

Warranty

The information contained

in this document is subject

to change without notice.

Agilent Technologies

makes no warranty of any

kind with regard to this

material, including, but

not limited to, the implied

warranties or

merchantabilityandfitness

for a particular purpose.

Agilent Technologies shall

not be liable for errors

contained herein or for

incidental or consequential

damages in connection

with the furnishing,

performance, or use of this

material.

WARNING

Warning Symbols Used on

the Product

The product is marked

with this symbol when the

user should refer to the

instruction manual in order

to protect the apparatus

against damage.

The product is marked

with this symbol to

indicate that hazardous

voltages are present

The product is marked

with this symbol to

indicate that a laser is

fitted. The user should

refer to the laser safety

information in the

Verification Manual.

frinside.fm Page 1 Friday, November 17, 2000 2:50 PM

Quick Start Guide

OmniBER 725

qs.bk Page 1 Friday, November 17, 2000 2:49 PM

This Quick Start Guide demonstrates the basic operation of the OmniBER 725. It shows you how to select

displays and use them to change the instrument settings. The Quick Start Guide includes the following

sections:

• Introducing the OmniBER Front Panel

• Introducing Smart Test

• Viewing Single or Multiple Windows

• Changing Instrument Settings

• Using the Pop-up Application

• Viewing Settings on an External Monitor

• Status Alarms

About This Book

qs.bk Page 2 Friday, November 17, 2000 2:49 PM

Contents

Keyboard and Display Conventions . . . . . . . . . . . . . . . . . . . . . 4

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Introducing the OmniBER Front Panel. . . . . . . . . . . . . . . . . . 6

Monitoring Status Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Introducing Smart Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Viewing Single or Multiple Windows . . . . . . . . . . . . . . . . . . 11

Multiple Window Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Single Window Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Changing Instrument Settings . . . . . . . . . . . . . . . . . . . . . . . . 13

Viewing the Contents of Folders . . . . . . . . . . . . . . . . . . . . . . . 15

Using the Pop-up Application . . . . . . . . . . . . . . . . . . . . . . . . . 16

Viewing Settings on an External Monitor . . . . . . . . . . . . . . . 19

Status Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

General Alarm Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Jitter Alarm Indicators (J1409A only). . . . . . . . . . . . . . . . . . . 20

SDH Alarm Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

SONET Alarm Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

qs.bk Page 3 Friday, November 17, 2000 2:49 PM

Keyboard and Display Conventions

The conventions used in this manual to illustrate instrument keys and display

information are as follows:

This is an example of a hardkey. Hardkeys (located to the right of the display) are

used to give access to different sets of instrument settings, or select dedicated

instrument functions. The key shown here displays the transmit settings.

This is an example of a softkey. Softkeys (located below the display) are used to

select instrument settings. The values associated with softkeys change as you move

the display cursor from one instrument setting to another.

These are the cursor control keys. They are used to move the display cursor from

one instrument setting to another.

This is an example of a pop-up menu. Pop-up menus are an alternative way of

selecting instrument settings (instead of using softkeys). To access a pop-up menu,

highlight an instrument setting, then use the key to complete the selection.

This symbol (when it appears next to settings on the display) indicates that there is a

pop-up menu associated with the instrument setting. To access a pop-up menu,

highlight the instrument setting which has this symbol, then use the key.

This symbol appears at the bottom right of the display when an optical transmit

module is fitted to the instrument. The symbol’s background changes from black to

yellow when the optical output is switched on.

TRANSMIT

PARALLEL

SET

qs.bk Page 4 Friday, November 17, 2000 2:49 PM

Introduction

Agilent’s OmniBER Communications Performance Analyzer provides the test

capability you need to verify the performance of today’s high-capacity transmission

systems and networks.

The main features of this instrument are:

• Framed and unframed SDH/SONET BER testing up to 2.5 Gb/s (STM-16/OC-

48) with J1408

• The addition of Jitter testing with J1409A.

• Optical and electrical interfaces.

• Seperate clock and data binary interfaces, electrically coded at 52Mb/s,

155Mb/s, 625Mb/s and 2.5Gb/s.

• Concatenated payload testing up to STM-16c/OC-48c.

• Measurement capabilities including protection switching tests, and pointer

processing.

• Fast access to key measurement tasks using Agilent’s Smart Test capability.

qs.bk Page 5 Friday, November 17, 2000 2:49 PM

Introducing the OmniBER Front Panel

Softkeys

Select instrument settings. The

values displayed on the softkeys

are associated with the instrument

control currently highlighted by the

cursor.

Press this key to access Smart Test settings.

Press this key to access settings associated with the transmitter.

Press this key to access settings associated with the receiver.

Press this key to access settings associated with the test timing and graph storage, and to

display measurement results.

Press this key to access settings associated with stored graphical results.

Press this key to access the following instrument utilities:

Stored Settings; Settings Control; Floppy Disk, Logging (printing); Remote Control;

Time & Date; Miscellaneous (settings); Options (and s/w revisions); Self Test; Trigger

Out

;

Calibration and Color Control.

SMART TEST

TRANSMIT

RECEIVE

RESULTS

GRAPH

OTHER

Cursor control keys

Move the display cursor from

one instrument setting to

another.

Pop-up menu keys

An alternative way to select

instruments settings (instead of

using softkeys).

In-lid Printer

Connector

External

Monitor

Connector

Display

Operates in either single or

multiple window mode.

Hardkeys

qs.bk Page 6 Friday, November 17, 2000 2:49 PM

Introducing the OmniBER Front Panel

Press this key to immediately log

selected results or screen dumps to the

printer.

Press this key to advance the paper in the

internal printer.

PRINT NOW

PAPER FEED

Press this key to start a

new test period or

terminate the current test

period. The indicator

above the key lights when

a test period is in progress.

RUN/STOP

Press this key to add

a single error to the

transmitted signal.

The type of error

added is selected on

the Error & Alarm

display.

SINGLE

Press this key to change the instrument

from Remote to Local control. The

indicator above the key lights when the

instrument is under Remote control.

LOCAL

CAUTION Do not press while loading a new roll

of paper in the printer. Wait until the paper is fed

through the printer mechanism. A paper jam could

result which would disable the printer.

PAPER FEED

qs.bk Page 7 Friday, November 17, 2000 2:49 PM

Introducing the OmniBER Front Panel

Monitoring Status Alarms

The LED indicators provide information about the current status of the instrument’s

receiver. If an alarm has occurred during the current test period, the HISTORY

indicator lights up. The figure below shows the status indicators for the dual

standard SDH/SONET option (Option 002).

These three indicators change

from green to red when an alarm

conditions occurs.

Press and hold this key to view the alarm history. When this key is

released the status indicators return to displaying the current status.

The HISTORY indicator lights when an alarm has occurred during

the current test period.

SHOW

Press this key to reset the HISTORY store (all lit indicators

extinguish). If an alarm condition is present during the reset, then

the indicators associated with that alarm will remain lit after the

reset. The resetting of the HISTORY store also occurs when you

start a new test period.

RESET

The PDH, DSn and ATM Alarm

Indicators are not used by the

Omniber 725.

qs.bk Page 8 Friday, November 17, 2000 2:49 PM

Tabla de contenidos

Otros manuales de Equipo de laboratorio de Agilent Technologies

Agilent Technologies

Agilent Technologies 7100 Manual de usuario

Agilent Technologies

Agilent Technologies 100 Manual de usuario

Agilent Technologies

Agilent Technologies 83620A Manual de usuario

Agilent Technologies

Agilent Technologies 5DX Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity Manual de usuario

Agilent Technologies

Agilent Technologies 5975T LTM GC/MSD Manual de funcionamiento

Agilent Technologies

Agilent Technologies 7890B Manual de instalación

Agilent Technologies

Agilent Technologies G2916A Manual de usuario

Agilent Technologies

Agilent Technologies Archon Manual de instrucciones

Agilent Technologies

Agilent Technologies 1200 series Manual de usuario

Agilent Technologies

Agilent Technologies E7473A Manual de usuario

Agilent Technologies

Agilent Technologies 4100 Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 5975 MSD Manual de usuario

Agilent Technologies

Agilent Technologies G1888 Manual de operación

Agilent Technologies

Agilent Technologies 1200 series Manual de usuario

Agilent Technologies

Agilent Technologies 5517B Manual de operación

Agilent Technologies

Agilent Technologies Varian 325-MS LC/MS Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity II Manual de usuario

Agilent Technologies

Agilent Technologies IMG-500 Manual de usuario

Agilent Technologies

Agilent Technologies G5562A Guía de configuración

Agilent Technologies

Agilent Technologies 1260 Infinity Manual de usuario

Agilent Technologies

Agilent Technologies 11970 Series Manual de usuario

Agilent Technologies

Agilent Technologies DNA 7500 Manual

Agilent Technologies

Agilent Technologies MX3000P Guía de seguridad

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario

Yamato

Yamato BM510 Manual de usuario