ADA INSTRUMENTS CUBE 2-360 GREEN Manual de usuario

Line Laser

OPERATING MANUAL

CUBE 2-360 GREEN

adainstruments.com

2English

THE MANUFACTURE RESERVES THE RIGHT TO MAKE CHANGES (NOT

HAVING AN IMPACT ON THE SPECIFICATIONS) TO THE DESIGN,

COMPLETE SET WITHOUT GIVING PRIOR WARNING.

APPLICATION

Line laser ADA CUBE 2-360 Green is designed to check the horizontal and

vertical position of the surfaces of the elements of building structures and

also to transfer the angle of inclination of the structural part to similar

parts during construction and installation works.

SPECIFICATIONS

Laser beam ....................................................Horizontal line 360°/vertical line 360°

Light sources ................................................ 2 laser diodes with laser emission

wave length of 532 nm

Laser safety class ........................................ Class 2, <1mW

Accuracy ......................................................... ±3mm/10m

Self-leveling range ....................................... ±4°

Operating range with/without receiver ...... 230/130 ft (70/40 m)

Power source ................................................ Li-ion battery 3.7 V /

3xAA 1,5V

Tripod thread ................................................ 2x1/4”

Operating temperature ............................. -5°C +45°C

Weight ............................................................. 0,86 lb (390 g)

FUNCTIONAL DESCRIPTION

1. Emitting a horizontal and vertical laser line.

2. Quick self-leveling: when line accuracy is out of the range the laser

line ashes and the warning sound is produced.

3. Compensator locking system for safe transportation.

4. Intermediate compensator locking system for slope operation.

5. Indoor and outdoor performance function.

English

4English

LASER LINES

FEATURES

1. Vertical laser beam (V) / Horizontal laser beam (H)

2. Detector mode

3. Battery compartment

4. Tripod mount 1/4’’

5. Compensator switch (ON/X/OFF)

6. Vertical laser window

7. Horizontal laser window

SAFETY INSTRUCTIONS

Please follow up instructions given in operating manual. Do not stare into

beam. Laser beam can lead to eye injury (even from greater distances).

Do not aim laser beam at persons or animals. The laser plane should be

set up so that the beam path is not at normal eye level. Use the line laser

for measuring jobs only.

Do not open line laser housing. Repairs should be carried out by autho-

rized workshops only. Please contact your local dealer. Do not remove

warning labels or safety instructions. Keep line laser away from children.

Do not use line laser in explosive environment.

OPERATION

Cube 2-360 Green is a reliable and convenient line laser. It will be irreplace-

able instrument for many years.

1. Before use, remove battery compartment cover. Insert three batteries

into battery compartment with proper polarity, then put the cover back.

2. Set the compensator locking grip (5) into ON position.

If the switch is ON,that means the power is on and the compensator is working.

If the switch (5) is in intermediate position, that means the power is opened,the

compensation is still locked, but it will not warn if you issue the slope. It’s

the hand-mode.

If the switch (5) is OFF, that means that the line laser is o, the compensator

is also locked.

3. Press button (1) to switch the vertical beam on. Press button (1)once again

to switch the horizontal beam on. Press button (1) to switch the horizontal

and vertical beams on. Switch on only necessary laser lines in order to save

battery life.

4. Press button (2). The mode “outside” is activated. Press button (2) once

again. The tool begins to operate in “inside” mode. Use the detector of laser

beam for this mode. See the operating manual for the operation with detector.

TO CHECK THE ACCURACY

TO CHECK THE ACCURACY OF LINE LASER (SLOPE OF PLANE)

Place the line laser on the tripod 5m away from the wall so the horizontal

laser line will be directed to the wall.

Switch on the power. The line laser starts to self-level. Mark point A on the

wall to show the contact of laser beam with the wall. Turn the line laser by

90° and mark points В, С, D on the wall. Measure distance “h” between the

highest and lowest points (these are A and D points in the picture).

If “h”is ≤ 6 mm, the measurement accuracy is good. If “h” exceeds 6 mm,

apply service center.

TO CHECK PLUMB

Choose a wall and set laser 5m away from the wall. Mark point A on the

wall, please note the distance from point A to ground should be 3m. Hang

a plumb line from A point to ground and nd a plumb point B on ground.

turn on the laser and make the vertical laser line meet the point B, along

the vertical laser line on the wall and measure the distance 3m from point

B to another point C. Point C must be on the vertical laser line, it means the

height of C point is 3m.

Measure the distance from point A to point C, if the distance is over 2 mm,

please, contact with seller to calibrate the laser.

English

6English

CARE AND CLEANING

Please handle measuring line laser with care. Clean with soft cloth only

after any use. If necessary damp cloth with some water. If line laser is wet

clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in

original container/case only.

Note: During transport On/O compensator lock (5) must be set to posi-

tion “OFF”. Disregard may lead to damage of compensator.

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS

• Measurements through glass or plastic windows;

• Dirty laser emitting window;

• After line laser has been dropped or hit. Please check the accuracy;

• Large uctuation of temperature: if instrument will beused in cold areas

after it has been stored in warm areas (or the other way round) please wait

some minutes before carrying out measurements.

ELECTROMAGNETIC ACCEPTABILITY (EMC)

• It cannot be completely excluded that this instrument will disturb other

instruments (e.g. navigation systems);

• will be disturbed by other instruments (e.g. intensive electromagnetic ra-

diation nearby industrial facilities or radio transmitters).

PRODUCT LIFE

Product life of the tool is 7 years. The battery and the tool should never

be placed in municipal waste. Date of production, manufacturer’s contact

information, country of origin are indicated on the product sticker.

LASER CLASS 2 WARNING LABEL ON THE LINE LASER

LASER CLASSIFICATION

The line laser is a laser class 2 laser product accortding to DIN IEC 60825-

1:2014. It is allowed to use unit without further safety precautions.

7English

WARRANTY

This product is warranted by the manufacturer to the original purchaser to

be free from defects in material and workmanship under normal use for a

period of two (2) years from the date of purchase. During the warranty pe-

riod, and upon proof of purchase, the product will be repaired or replaced

(with the same or similar model at manufactures option), without charge

for either parts of labour. In case of a defect please contact the dealer

where you originally purchased this product. The warranty will not apply

to this product if it has been misused, abused or altered. Without limiting

the foregoing, leakage of the battery, bending or dropping the unit are

presumed to be defects resulting from misuse or abuse.

EXCEPTIONS FROM RESPONSIBILITY

The user of this product is expected to follow the instructions given in op-

erators’ manual. Although all instruments left our warehouse in perfect

condition and adjustment the user is expected to carry out periodic checks

of the product’s accuracy and general performance. The manufacturer,

or its representatives, assumes no responsibility of results of a faulty or

intentional usage or misuse including any direct, indirect, consequential

damage, and loss of prots. The manufacturer, or its representatives, as-

sumes no responsibility for consequential damage, and loss of prots by

any disaster (earthquake, storm, ood ...), re, accident, or an act of a third

party and/or a usage in other than usual conditions.

The manufacturer, or its representatives, assumes no responsibility for

any damage, and loss of prots due to a change of data, loss of data and

interruption of business etc., caused by using the product or an unusable

product. The manufacturer, or its representatives, assumes no responsi-

bility for any damage, and loss of prots caused by usage other thsn ex-

plained in the users’ manual.

The manufacturer, or its representatives, assumes no responsibility for

damage caused by wrong movement or action due to connecting with oth-

er products.

8English

WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:

1. If the standard or serial product number will be changed, erased, re-

moved or wil be unreadable.

2. Periodic maintenance, repair or changing parts as a result of their nor-

mal runout.

3. All adaptations and modications with the purpose of improvement

and expansion of normal sphere of product application, mentioned in the

service instruction, without tentative written agreement of the expert pro-

vider.

4. Service by anyone other than an authorized service center.

5. Damage to products or parts caused by misuse, including, without lim-

itation, misapplication or nrgligence of the terms of service instruction.

6. Power supply units, chargers, accessories, wearing parts.

7. Products, damaged from mishandling, faulty adjustment, maintenance

with low-quality and non-standard materials, presence of any liquids and

foreign objects inside the product.

8. Acts of God and/or actions of third persons.

9. In case of unwarranted repair till the end of warranty period because

of damages during the operation of the product, it’s transportation and

storing, warranty doesn’t resume.

English

WARRANTY CARD

Name and model of the product __________________________________________

Serial number___________________________Date of sale______________________

Name of commercial organization ________________________________________

stamp of commercial organization

Warranty period for the instrument explotation is 24 months after the

date of original retail purchase.

During this warranty period the owner of the product has the right for

free repair of his instrument in case of manufacturing defects.

Warranty is valid only with original warranty card, fully and clear lled

(stamp or mark of thr seller is obligatory).

Technical examination of instruments for fault identication which is

under the warranty, is made only in the authorized service center.

In no event shall manufacturer be liable before the client for direct or

consequential damages, loss of prot or any other damage which occur

in the result of the instrument outage.

The product is received in the state of operability, without any visible

damages, in full completeness. It is tested in my presence. I have no

complaints to the product quality. I am familiar with the conditions of

qarranty service and i agree.

purchaser signature _______________________________

Before operating you should read service instruction!

If you have any questions about the warranty service and technical support contact

seller of this product

adainstruments.com

ADA International Group Ltd., No.6 Building, Hanjiang West Road #128,

Changzhou New District, Jiangsu, China

Made In China

Tabla de contenidos

Otros manuales de Nivel láser de ADA INSTRUMENTS

ADA INSTRUMENTS

ADA INSTRUMENTS 2D Basic Level Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS 3D Liner 2V Green Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS 6D SERVOLINER GREEN Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS 3D Liner 2V Green Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS CUBE MINI Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS ECO 2 XL Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS ARMO 2D Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS CUBE 2-360 Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS 3D Liner 2V Green Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS ADA BASIS Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS ROTARY 400 HV-G SERVO Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS TOPLINER 3-360 Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS ProDigit 30 Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS 6D SERVOLINER Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS 3D Liner 2V Green Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS ROTARY 500 HV SERVO Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS CUBE Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS CUBE 3-360 GREEN Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS Phantom 2D Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS ProLevel 40 Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS ULTRALiner 360 2V Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS CUBE 3D Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS 2D Basic Level Manual de usuario

ADA INSTRUMENTS

ADA INSTRUMENTS ROTARY 500 HV SERVO Manual de usuario

Manuales populares de Nivel láser de otras marcas

Nedo

Nedo ET-5 Manual de usuario

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manual de usuario

LaserLiner

LaserLiner X2-Laser Manual de usuario

Spectra

Spectra LL300N Manual de usuario

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manual de usuario

Nedo

Nedo Crossliner 4 Manual de usuario

Lasertec

Lasertec FX360G Manual de usuario

Flex

Flex ALC 8 Manual de usuario

Black & Decker

Black & Decker LZR5 Manual de usuario

Johnson

Johnson 40-6692 Manual de usuario

Cocraft

Cocraft HL 20-SG Manual de usuario

Zircon

Zircon iLine Manual de usuario

HWH

HWH 310 SERIES Manual de usuario

Leica

Leica iCON robot 60 Manual de usuario

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manual de usuario

LaserLiner

LaserLiner ActiveFinder XP Manual de usuario

DeWalt

DeWalt DW082 Manual de usuario

imex

imex EL20 Manual de usuario