ADA INSTRUMENTS ProDigit Mini Manual de usuario
OPERATING MANUAL
ProDigit Mini Digital Protractor
Manufacturer ADAINSTRUMENTS.COM
ProDigit Mini
2
TABLE OF CONTENTS
1. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. LCD screen icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Button function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6. Warranty/Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Appendix 1. Certicate of acceptance and sale
Appendix 2. Warranty card
ENG
ProDigit Mini 3
APPEARANCE
1) HOLD/SOUND - Hold function/Sound function
2) ON/REF/OFF - On/Relative angle measurement
mode/O
3) LCD-display
4) mm/m%in/ft/LIGHT - Units/Backlight
Important note:
1. The digital level has been pre-calibrated at the
factory.
2. The product should only be recalibrated if it has
been dropped (see Calibration).
3. “ERROR” shows when either the forward tilt angle or
backward tilt angle is not less 30°.
1
2
3 4
Battery cover
ProDigit Mini
4
LCD SCREEN ICONS
BUTTON FUNCTION
1) ON/REF/OFF : Press once to turn the LCD display screen on. Press the button again to set current anglу to zero,
REF icon will be displayed to indicate relative angle measurement mode. Long press to turn o the LCD.
2) HOLD/SOUND: Press once to enter the HOLD function and for the “H” icon be displayed, press once again to re-
lease hold function. Long press the button for 3 seconds to activate sound function, shows. Beeper will sound
at level (0°) and plumb (90°). Long press again to turn o the sound, disappears. The sound function utilizes a
series of beeps that incerase in tempo as it approaches 0 and 90 degrees and eventually reaching a constant tone
at exactly 0 and 90 degrees.
3) mm/m%in/ft/LIGHT: Converts angles to dierent units. Press once to change the display units from degrees (°)
Replace batteries when the Battery Power Icon is ashing. Only ashing when voltage is below 2.2 V.
Sound/Beeper Icon - this icon appears on the screen when the beeper function is activated.
Indicates that the level is working in relative angle mode.
This icon appears on the screen when the HOLD function is activated.
Indicates that the digital level is calibrating for one direction.
Indicates that the digital level is calibrating for another direction.
ProDigit Mini 5
to mm/m, to percent slope (%), to pitch (in/ft). Long press for 3 seconds to turn on back light. Long press again for 3
seconds to turn o the back light. Touch any key to turn on the light around 30 s.
Reverse Display: When turned upside down, the product shows up-down reversal for easy read.
CALIBRATION
1) Place the digital level on a at and smooth surface, press HOLD/SOUND button and ON/REF/OFF button at the
same time, the calibration mode is activated and “-1-” will be displayed.
2) Press ON/REF/OFF button again, “-1-” will ash briey. Do not move until -2- displays.
3) Rotate it 180° in the same location and press ON/REF/OFF button, “-2-” will ash briey. Do not move until the unit
has completed the calibration and reset the display to the current level.
Absolute Measurement
Short press ON/REF/OFF button into Absolute measurement mode, LCD
displays the angle of absolute level.
ProDigit Mini
6
Symbol +/- shows how to adjust the surface to be leveled.
Relative Measurement
Put it on the rst measured surface, press ON/REF/OFF button, LCD displays 0.00°. Put it on the second measured
surface, LCD shows the intersection angle between two measured surfaces. Press ON/REF/OFF button again to
turn into Absolute measurement mode.
Slope
The product measures the slope of a surface in percent. This is useful when laying pipe for proper drainage. When
the conversion button is in the slope mode, it will display (%). If the sound mode has been activated, the level will
beep at 0.0%.
ProDigit Mini 7
Measuring range °: 4*90°; mm/m: 1000 mm/m; %: 100%; in/ft: 12 in/ft
Resolution 0.05°
Accuracy ±0.15°
Power DC3V (AAAx2)
Battery life Around 100 h continuous without backlight
Working temperature -10°C to 50°C
Working humidity ≤ 85%
Auto shutdown time 5 min
Auto shutdown backlight time 30 s
Waterproof IP65
TECHNICAL DATA
ProDigit Mini
8
WARRANTY
This product is warranted by the manufacturer to the original purchaser to be free from defects in material and
workmanship under normal use for a period of two (2) years from the date of purchase.
During the warranty period, and upon proof of purchase, the product will be repaired or replaced (with the same
or similar model at manufactures option), without charge for either parts of labour.
In case of a defect please contact the dealer where you originally purchased this product. The warranty will not ap-
ply to this product if it has been misused, abused or altered. Withiut limiting the foregoing, leakage of the battery,
bending or dropping the unit are presumed to be defects resulting from misuse or abuse.
EXCEPTIONS FROM RESPONSIBILITY
The user of this product is expected to follow the instructions given in operators’ manual. Although all instruments
left our warehouse in perfect condition and adjustment the user is expected to carry out periodic checks of the
product’s accuracy and general performance.
The manufacturer, or its representatives, assumes no responsibility of results of a faulty or intentional usage or
misuse including any direct, indirect, consequential damage, and loss of prots. The manufacturer, or its repre-
sentatives, assumes no responsibility for consequential damage, and loss of prots by any disaster (earthquake,
storm, ood ...), re, accident, or an act of a third party and/or a usage in other than usual conditions.
The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of prots due to a
change of data, loss of data and interruption of business etc., caused by using the product or an unusable product.
ProDigit Mini 9
WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:
1. If the standard or serial product number will be changed, erased, removed or wil be unreadable.
2. Periodic maintenance, repair or changing parts as a result of their normal runout.
3. All adaptations and modications with the purpose of improvement and expansion of normal sphere of prod-
uct application, mentioned in the service instruction, without tentative written agreement of the expert provider.
4. Service by anyone other than an authorized service center.
5. Damage to products or parts caused by misuse, including, without limitation, misapplication or nrgligence of
the terms of service instruction.
6. Power supply units, chargers, accessories, wearing parts.
7. Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard
materials, presence of any liquids and foreign objects inside the product.
8. Acts of God and/or actions of third persons.
9. In case of unwarranted repair till the end of warranty period because of damages during the operation of the
product, it’s transportation and storing, warranty doesn’t resume.
For more information you can visit our website WWW.ADAINSTRUMENTS.COM
or write the letter with your questions on [email protected]
The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of prots caused by
usage other thsn explained in the users’ manual. The manufacturer, or its representatives, assumes no responsi-
bility for damage caused by wrong movement or action due to connecting with other products.
WARRANTY CARD
Name and model of the product _______________________________________________________________________________
Serial number _____________________________ date of sale ____________________________________________________
Name of commercial organization _____________________ stamp of commercial organization
Warranty period for the instrument explotation is 24 months after the date of original retail purchase.
During this warranty period the owner of the product has the right for free repair of his instrument in case of
manufacturing defects.
Warranty is valid only with original warranty card, fully and clear lled (stamp or mark of thr seller is obligatory).
Technical examination of instruments for fault identication which is under the warranty, is made only in the
authorized service center.
In no event shall manufacturer be liable before the client for direct or consewuential damages, loss of prot or
any other damage which occur in the result of the instrument outage.
The product is received in the state of operability, without any visible damages, in full completeness. It is tested
in my presence. I have no complaints to the product quality. I am familiar with the conditions of qarranty service
and i agree.
purchaser signature _______________________________
Before operating you should read service instruction!
If you have any questions about the warranty service and technical support contact seller of this product
Tabla de contenidos
Idiomas:
Otros manuales de Nivel láser de ADA INSTRUMENTS
ADA INSTRUMENTS
ADA INSTRUMENTS ProLevel 40 Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS 3D Liner 2V Green Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS CUBE MINI Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS ROTARY 500 HV SERVO Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS 3D Liner 2V Green Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS 5D CROSSPOINT Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS TOPLINER 3-360 Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS CUBE 2-360 GREEN Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS 2D Basic Level Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS 2D Basic Level Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS CUBE 3-360 GREEN Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS ROTARY 500 HV SERVO Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS CUBE 360-2V GREEN Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS Phantom 2D Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS ROTARY 500 HV SERVO Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS 3D Liner 2V Green Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS TOPLINER 3-360 GREEN Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS TOPLiner 3x360 Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS ADA BASIS Manual de usuario
ADA INSTRUMENTS
ADA INSTRUMENTS ECO 2 XL Manual de usuario
