ZyXEL Communications Prestige 642M series Suplemento

ZyXEL Communications, Inc.______________________________________________Prestige Application Notes

INET0003:1

Last modified: December 20, 1996

Internet Access for Workstation/PC where ISP assigns a dynamic single IP address

192.68.135.1

204.5.1.1

192.68.135.3

[dynamic address]

192.68.135.2

Note: The IP address shown above are examples only!

This configuration note explains how to set up a workstation on your network to use the Prestige to

connect to the Internet via an ISP. In this configuration, the user has a single user Internet account which

will assign one IP address dynamically. Notice that with this configuration, all stations on the network

will be able to access the Internet, but they will be ‘hidden’ from the outside. That is, from the ISP’s point

of view, they will only be able to ‘see’ the single IP address (in this case, the one dynamically assigned)

There will be two items that you need to set up. These are the workstation and the Prestige.

I. Workstation Setup

To set up the workstation (W/S), you will need to set the following parameters:

• IP Address- the IP address assigned to the workstation itself, in the above example,

‘192.68.135.1’

• Subnet Mask- the subnet mask used for your network. Class C networks generally use a 24-bit

netmask, ‘255.255.255.0’.

• DNS (Domain Name Server) Address- the IP address of the server station on your network that

acts as the DNS. In the above example, ‘192.68.135.2’. Please note that some networks will not

have a DNS. In this situation, you will need to obtain the IP address of a remote DNS from the

ISP.

• Default Gateway- the IP address of the station or device on your network that acts as a default

gateway. That is, any packets without an implicit route to their destination IP address will be

routed to the default gateway. Since the Prestige is connecting to the Internet, the default

gateway in this case would be the IP address of the Prestige, ‘192.68.135.3’.

The procedure for configuring these parameters for your workstation may differ depending on the

type of TCP/IP networking software you are using on your workstation. If you are unfamiliar with

how to set these parameters, you can refer to the technical notes corresponding to your software.

• Trumpet Winsock Windows 3.1 Workstation Setup - see section ‘Internet Access’

• Chameleon LAN Setup - see section ‘Internet Access’

• Windows 95/NT - see section ‘Internet Access’

• MacTCP Setup

II. Prestige Setup

In order to configure your Prestige for this application, make sure you have the following menus

configured correctly.

Prestige

W/S ISP Gateway

DNS

ZyXEL Communications, Inc.______________________________________________Prestige Application Notes

INET0003:2

Note that the fields are indicated inboldtype.

ZyXEL Communications, Inc.______________________________________________Prestige Application Notes

INET0003:3

Menu 1:

Menu 1 - General Setup

System Name= P2864I

Location= San Jose

Contact Person's Name= CC

Route IP= Yes

Route IPX= N/A

Route AppleTalk= N/A

Bridge= No

Press ENTER to Confirm or ESC to Cancel:

• In menu 1, make sure theRoute IPfield is set to ‘Yes’.

Menu 2:

Menu 2 - ISDN Setup

Switch Type= Northern Telecom Custom

B Channel Usage= Switch/Switch

1st Phone #= 5551212

SPID #= 408555121200

Analog Call= Modem

2nd Phone #= 5551213

SPID #= 408555121300

Analog Call= Voice

Press ENTER to Confirm or ESC to Cancel:

• In menu 2, set your switch type, phone numbers, and SPIDs (if necessary).

• After saving this menu, you will be asked if you want to perform an ISDN connection test. Select

‘Yes’ to perform the test. If the test fails, refer to the User’s Manual Troubleshooting section for

corrective action.

ZyXEL Communications, Inc.______________________________________________Prestige Application Notes

INET0003:4

Menu 3.2:

Menu 3.2 - TCP/IP Ethernet Setup

IP Address= 192.68.135.3

IP Subnet Mask= 255.255.255.0

RIP Direction= Both

Press ENTER to Confirm or ESC to Cancel:

• In menu 3.2, theIP Addressand IP Subnet Maskfield must be set correctly in order for your

workstation to communicate with your Prestige.

Menu 4:

Menu 4 - Internet Access Setup

ISP's Name= My_ISP

ISP IP Addr= 204.4.5.1

Pri Phone #= 5551212

Sec Phone #=

My Login= username

My Password= ********

Single User Account= Yes

IP Addr= 0.0.0.0

Server IP Addr= 192.68.135.2

Telco Option:

Transfer Type= 64K

Press ENTER to Confirm or ESC to Cancel:

• The ISP IP Addrfield should be set to the ISP Gateway address. This address is supplied by

your ISP.

• Pri Phone #is the number your Prestige has to dial in order to access your ISP. This number is

supplied by your ISP.

• My Loginand My Passwordis the login information provided by your ISP.

•Since you have a single user Internet account,Single User Accountshould be set to ‘Yes’.

• For the IP Addrfield, since the IP address will be dynamically assigned, enter ‘0.0.0.0’ or you

can leave this field blank.

• Server IP Addrshould have the IP address of the server station on your network. Please note

that this configuration will only work if you have one server on the network. In our example, the

DNS is our server, so we would enter ‘204.5.1.2’. If you do not have a server station on your

network, just leave this field blank.

ZyXEL Communications, Inc.______________________________________________Prestige Application Notes

INET0003:5

• After saving this menu, you will be asked if you want to perform an Internet connection test.

Select ‘Yes’ to perform the test. If the test fails, refer to the User’s Manual Troubleshooting

section for corrective action.

Menu 11:

Menu 11 - Remote Node Setup

1. My_ISP (ISP)

2. ________

3. ________

4. ________

Enter Node # to Edit:

After you have configured and saved menu 4, you should see that you have created a remote node in

menu 11. You can perform more advanced configuration options to this remote node in this menu.

In addition, you can make manual calls to the Internet by using theManual Calloption in menu 24.4

and selecting the corresponding ‘(ISP)’ remote node.

Otros manuales para Prestige 642M series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Enrutador de red de ZyXEL Communications

ZyXEL Communications

ZyXEL Communications GS2210 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications FSG1100HN Manual de usuario

ZyXEL Communications

ZyXEL Communications Dimension ES-124P Guía de referencia

ZyXEL Communications

ZyXEL Communications Prestige 660R-6 Series Manual

ZyXEL Communications

ZyXEL Communications P-663H-51 Manual de usuario

ZyXEL Communications

ZyXEL Communications XTREMEMIMO X-550 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyWALL Series Manual de usuario

ZyXEL Communications

ZyXEL Communications ES-2024A Manual

ZyXEL Communications

ZyXEL Communications P-335WT Manual de usuario

ZyXEL Communications

ZyXEL Communications ES-2108 Manual

ZyXEL Communications

ZyXEL Communications NBG4604 Manual de usuario

ZyXEL Communications

ZyXEL Communications Prestige 971M Manual de usuario

ZyXEL Communications

ZyXEL Communications o2 HomeBox 6641 Manual de usuario

ZyXEL Communications

ZyXEL Communications Prestige 2864I Manual de usuario

ZyXEL Communications

ZyXEL Communications P-336M Manual de usuario

ZyXEL Communications

ZyXEL Communications ES-2024A Manual de usuario

ZyXEL Communications

ZyXEL Communications GS1100-16 - EDITION 1 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-335 Plus Manual de usuario

ZyXEL Communications

ZyXEL Communications NXC5200 Manual de usuario

ZyXEL Communications

ZyXEL Communications SCR 50AXE Manual de usuario

ZyXEL Communications

ZyXEL Communications ES-105A Manual de usuario

ZyXEL Communications

ZyXEL Communications G-120 Manual de usuario

ZyXEL Communications

ZyXEL Communications Dimension ES-3124 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-660R-T1/T3 V2 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad