Yamaha Add-On Effects Manual de usuario

What are Add-On Effects?

Add-On Effects are software packages that install additional high-quality effects programs on

digital consoles.

Studio Manager Compressor 276S Window

What is Compressor 276/276S?

Compressor 276/276S is an Add-On Effects package.

This effect emulates the characteristics of analog compressors, which are used as a standard effect in recording

studios. It frames and thickens the sound, and is suitable for drum and bass sounds.

Compressor 276S is a stereo effect. You can link its parameters for the L and R channels.

Compressor 276 is a mono split effect. You can control two monaural channels independently.

What is VCM (Virtual Circuitry Modeling)?

VCM is a technology that enables you to model element levels in analog circuits (such as resistors and

capacitors).

This technology was developed by an engineering group led by Mr. Kunimoto, an engineer who developed the

first physical modeling synthesizers, VL1 and VP1. Compressor 276/276S utilizes VCM technology.

Special Notices

• Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use.

• The software and this Owner’s Manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written

consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held

responsible for the results of the use of this manual and the software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat different from

the screens which appear on your computer.

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective

companies.

Installing Compressor 276/276S

See the Add-On Effects Installation Guide for more information on installing Compressor 276/276S.

Using Compressor 276/276S

As with other effects, you can recall and edit the Compressor 276/276S program on the console or in Studio

Manager.

The basic operation is as follows:

Select one of the internal effects processors.

Patch the signal to and from the currently selected effects processor.

Locate the Effects Library page.

Select and recall Compressor 276 or 276S.

When you recall the program, all effects processor outputs will be muted temporarily.

Locate the Effects Edit page.

Set the parameters. (See the “Part Names and Functions” section for more information on Compressor 276/

276S parameters.)

The procedure for recalling and editing Compressor 276/276S varies depending on the console you are using.

Refer to the Owner’s Manual that came with your console for more information.

Editing Parameters in Studio Manager

In Studio Manager, editable parameters appear in both the Compressor 276/276S window and the Generic Editor

window.

The Compressor 276/276S window enables you to edit Compressor 276/276S specific parameters, and the

Generic Editor window enables you to edit parameters common to Compressor 276/276S and other Effects.

Refer to the Studio Manager Owner’s Manual for your console for more information on the Generic Editor

window.

Studio Manager Generic Editor Window

Part Names and Functions

Studio Manager Compressor 276S Window

Console screen (This is a DM2000 screen.)

6 7 4

5 3 9

)

1 2 3 4

5 6 7

In the following section:

Functions marked with are available in Studio Manager.

Functions marked with are available on the console.

[INPUT]/[INPUT (1&2)] controls

Adjust the input level.

The range is from –180 through 0 dB.

[OUTPUT]/[OUTPUT (1&2)] controls

Adjust the output gain.

The range is from –180 through 0 dB.

[ATTACK]/[ATTACK (1&2)] controls

Adjust the Compressor’s attack time.

The range is from 0.022 through 50.40 ms.

[RELEASE]/[RELEASE (1&2)] controls

Adjust the Compressor’s release time.

The range is from 10.88 through 544.22ms.

[RATIO]/[RATIO (1&2)] controls

Adjust the Compressor’s ratio.

Options are 2:1, 4:1, 8:1, 12:1, and 20:1.

Studio Manager

Console

1 2 3 4

5 6 7

6 7 42

5 3

Studio Manager Console

Studio Manager

Console

Studio Manager

Console

Studio Manager

Console

Studio Manager Console

[AUTO MAKE UP] switch/[MAKE UP (1&2)] controls

If this switch or control is turned on, the amount of output gain reduction applied by the Compressor is

automatically corrected. In Studio Manager, the LED lights up red when this parameter is turned on.

[SIDECHAIN HPF] switch/[SIDEHPF (1&2)] controls

If this switch or control is turned on, the Compressor effect in the low range is reduced, thus the output level

from the low range is enhanced. In Studio Manager, the LED lights up red when this parameter is turned on.

VU meter

This is a VU meter. You can select monitoring signals via the [GR], [–10], [–20], and [OFF] switches.

[GR]/[–10]/[–20]/[OFF] switches

Enable you to select signals monitored via the

VU meter

: Indicates the amount of gain reduction.

–10

: Indicates the signal with –10 dBu as 0VU.

–20

: Indicates the signal with –20 dBu as 0VU.

OFF

: Turns off the VU meter.

GR meter

Indicates the amount of gain reduction applied by the Compressor.

Studio Manager Console

)

Studio Manager

)

Console

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

312IP-01A0

Otros manuales para Add-On Effects

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Software de Yamaha

Yamaha

Yamaha mLAN Driver Manual de usuario

Yamaha

Yamaha Add-On Effects Manual de usuario

Yamaha

Yamaha YC-3B Manual de usuario

Yamaha

Yamaha LS9 Editor Manual de usuario

Yamaha

Yamaha Loopfactory AN200 Manual de usuario

Yamaha

Yamaha LS9-16 Manual de usuario

Yamaha

Yamaha DME32 V1.1 Guía de configuración

Yamaha

Yamaha USB Manual de usuario

Yamaha

Yamaha DME Designer Manual de usuario

Yamaha

Yamaha DM 2000 Version 2 Manual de usuario

Yamaha

Yamaha M7CL StageMix V1.5 Manual de usuario

Yamaha

Yamaha File Utility Manual de usuario

Yamaha

Yamaha Arp Manual de usuario

Yamaha

Yamaha TOOLS for TYROS Manual de usuario

Yamaha

Yamaha QS1-WD Manual de usuario

Yamaha

Yamaha SPX2000 Editor Manual de usuario

Yamaha

Yamaha QY100 Data Filer Manual de usuario

Yamaha

Yamaha MOTIF RACK Music System Manual de usuario

Yamaha

Yamaha M7CL StageMix V1.5 Manual de usuario

Yamaha

Yamaha QS1-MC Manual de usuario

Yamaha

Yamaha CL1 Manual de usuario

Yamaha

Yamaha PM1D Manager V2 Instrucciones y recetas

Yamaha

Yamaha MagicStomp Manual de usuario

Yamaha

Yamaha mLAN Driver Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario