Winmate W07FA3S-EHT1 Manual de usuario

Please read these instructions carefully before using this product, and save this manual for future use.

E-Series HMI

W07FA3S-EHT1

W10FA3S-EHH2

W15FA3S-EHA2

Quick Start Guide

V1.1

For more information on this and other Winmate

products, please visit our website at:

www.winmate.com

Document Part Number: 9152111I101C

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class

"B" digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at him own expense.

European Union

Electromagnetic Compatibility Directive (2014/30/EU)

EN55024: 2010/ A1: 2015

oIEC61000-4-2: 2009

oIEC61000-4-3: 2006+A1: 2007+A2: 2010

oIEC61000-4-4: 2012

oIEC61000-4-5: 2014

oIEC61000-4-6: 2014

oIEC61000-4-8: 2010

oIEC61000-4-11: 2004

EN55032: 2012/AC:2013

EN61000-3-2:2014

EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the

Council directions.

iii

No part of this document may be reproduced, copied, translated, or transmitted in

any form or by any means, electronic or mechanical, for any purpose, without the

prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order

to improve design and/or performance. We assume no responsibility or liability

for the use of the described product(s) conveys no license or title under any

patent, copyright, or masks work rights to these products, and make no

representations or warranties that these products are free from patent, copyright,

or mask work right infringement, unless otherwise specified. Applications that are

described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the specified

use without further testing or modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be free from

material and workmanship defects for a period of one year from the invoice date.

If the customer discovers a defect, we will, at his/her option, repair or replace the

defective product at no charge to the customer, provide it is returned during the

warranty period of one year, with transportation charges prepaid. The returned

product must be properly packaged in its original packaging to obtain warranty

service. If the serial number and the product shipping data differ by over 30 days,

the in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth

digit means the month (e. g., with A for October, B for November and C for

December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the

website of our distributor to find the update information about the product.

Second, contact with your distributor, sales representative, or our customer

service center for technical support if you need additional assistance.

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every business

day. We are always ready to give advice on application requirements or specific

information on the installation and operation of any of our products.

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronics

personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque

vous travaillez sur celui-ci. Ne pas brancher de connections

lorsque l’alimentation est présente. Des composantes

électroniques sensibles peuvent être endommagées par des sauts

d’alimentation. Seulement du personnel expérimenté devrait ouvrir

ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge

statique avant de toucher la carte CPU. Les équipements

électroniques moderns sont très sensibles aux décharges

d’électricité statique. Toujours utiliser un bracelet de mise à la

terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou

dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.

Contents

INTRODUCTION 1

Features 1

Package Contents 2

Product Overview 3

E-Series HMI 7” 3

E-Series HMI 10.1” 4

E-Series HMI 15.6” 5

GETTING STARTED 6

Turning On Your Device 6

Connecting to Other Devices 7

DC Input Connector 7

Serial Port Connector 7

LAN (RJ45) Connector 8

USB A Type Connector 8

USB OTG Connector 8

CAN Bus Connector 9

Changing Serial Port Settings 10

Ethernet 12

Main Menu 12

Configuring Ethernet 13

Checking Ethernet Settings 14

Winmate® Home Manager 15

How to Lock Applications 15

How to Reset WHM 17

Turning Off Your Device 18

INSTALLATION 19

Wiring Requirements 19

Mounting Solution 20

VESA Mounting 20

Panel Mounting 21

SPECIFICATIONS 22

Hardware Specifications 22

APPENDIX 23

Appendix A: Cleaning the Monitor 23

Appendix B: Winmate Software Development Kit 24

INTRODUCTION

Congratulations on purchasing Winmate® E-Series HMI. Winmate® continues

developing new generation of Human Machine Interfaces for Industry 4.0 and

Internet of Things (IoT). Our E-Series HMI runs on Android 4.4 / Linux operating

system that allows installing the latest applications (APPs). Thereby wide

customization possibilities are available to satisfy the needs of industrial

automation.

There is one USB 2.0 onboard to connect mouse or keyboard, USB OTG for

system updates and micro SD card for data logging, backup or data storage.

1 GB system memory ensures stable operation of applications.

With mounting clips for panel mounting there is no need to drill holes in a fixture.

This saves you the time for mounting and guarantee aesthetic look of the wall

after the unit gets removed.

Features

Winmate® E-Series HMI features:

Freescale® Cortex® A9 i.MX6 Dual Core 1 GHz

Android/Linux Operating System (Customizable and easy to use)

Resistant to scratches Projected Capacitive Multi-Touch (P-CAP)

Fanless cooling system and Ultra-low power consumption

Front IP65 water and dust proof, rear IP22

Power over Ethernet (Data and Power connections in a single cable)

Mounting clips for Quick Installation

Elegant design for room booking, access control and room information

applications

Package Contents

Carefully remove the box and unpack your device. Please check if all the items

listed below are inside your package. If any of these items are missing or

damaged contact us immediately.

Standard factory shipment list:

HMI Device

Quick Start

Guide

(Hardcopy)

User Manual

& Driver CD

USB to Micro

USB Cable

Varies by

product

specifications

9152111I101C

9171111I102P

9487049050K0

AC Adapter

(12V/ 50W)

Power Cord

2 pin Terminal

Block

Mini USB to

UART Cable

(For Linux use)

922D050W12VA

Varies by

country

94J602G020K0

94E7053090K0

Mounting Clips

and Screws

82111E240400

Product Overview

E-Series HMI 7”

Unit: mm

Dimensions: 184.8 x 128.6 x 50.2 mm

№

Description

№

Description

①

Mini USB Console (Linux use)

⑤

RS232/422/485

②

Micro SD

⑥

CAN BUS

③

LAN/ PoE

⑦

1 x USB 2.0

④

USB OTG

⑧

12V DC in (Phoenix type)

E-Series HMI 10.1”

Unit: mm

Dimensions: 293.6 x 199.2 x 62.3 mm

№

Description

№

Description

①

Mini USB Console (Linux use)

⑤

RS232/422/485

②

Micro SD

⑥

CAN BUS

③

LAN/ PoE

⑦

1 x USB 2.0

④

USB OTG

⑧

12V DC in (Phoenix type)

Otros manuales para W07FA3S-EHT1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Panel táctil de Winmate

Winmate

Winmate W04FA3S-EHT1 Manual de usuario

Winmate

Winmate W07L100-GCO1 Manual de usuario

Winmate

Winmate R15IB3S-SPC369 Manual de usuario

Winmate

Winmate R15IK3S-POC3 Manual de usuario

Winmate

Winmate G-WIN Manual de usuario

Winmate

Winmate W07FA3S-PCM1AC-PoE Manual de usuario

Winmate

Winmate W07IB3S-PCM1AC Manual de usuario

Winmate

Winmate EL Series Manual de usuario

Winmate

Winmate G-WIN Slim IP65 Manual de usuario

Winmate

Winmate R10L100-PCT2-PoE Manual de usuario

Winmate

Winmate W10IB3S-PCH2AC-PoE S-Series Manual de usuario

Winmate

Winmate W05TA3S-PCT3AC Manual de usuario

Winmate

Winmate W10IB3S-PCH2AC-PoE S-Series Manual de usuario

Winmate

Winmate W22IB3S-PCA3 PPC Manual de usuario

Winmate

Winmate W10IB3S-GSH1 Manual de usuario

Winmate

Winmate R10IB3S-SPT269 Manual de usuario

Winmate

Winmate W10IB3S-EHH2 Manual de usuario

Winmate

Winmate W10IE3S-MRH2FP Manual de usuario

Winmate

Winmate R17IK3S-SPM1 Manual de usuario

Winmate

Winmate W10IB3S-GSH2 Manual de usuario

Winmate

Winmate W07FA3S-GSO1 Manual de usuario

Winmate

Winmate W10IH3S-GCH1(HB) Manual de usuario

Winmate

Winmate B Series Manual de usuario

Winmate

Winmate IP69K Stainless P-Cap Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario