Winmate W24L100-SPA269 Manual de usuario
Please read this instructions before operating the device and retain them for future reference.
10.4~23.8” IP69K Stainless
P-Cap Display
Model No. R10L100-
SPT269
R15L100-SPC369
R19L100-SPM169
W22L100-SPA369
W24L100-SPA269
Quick Start Guide
For more information on this and
other Winmate products, please
visit our website at:
www.winmate.com
Version 1.3
Document Part Number: 915211101031
IP69K Stainless Display Quick Start Guide Contents
2
Contents
❶INTRODUCTION 7
1.1 Features 7
1.2 Package Content 8
1.3 Product Overview 9
1.3.1 Dimensions 10.4" 9
1.3.2 Dimensions 15" 9
1.3.3 Dimensions 19” 10
1.3.4 Dimensions 21.5” 10
1.3.4 Dimensions 23.8” 11
1.4 Physical Buttons and LED Indicators 11
1.5 Connectors 12
❷GETTING STARTED 13
2.1 Turning On the Device 13
2.2 Turning Off the Device 13
❸INSTALLATION 14
3.1 Wiring Requirements 14
3.2 Connector Pin Assignments 15
3.2.1 Power Cable 15
3.2.2 USB Cable (For Touch) 16
3.2.3 VGA Cable 16
3.2.4 DVI Cable (Optional) 17
3.6 Mounting 18
3.6.1 VESA Mounting 18
3.6.2 Yoke Mounting 19
❹SPECIFICATIONS 20
APPENDIX 21
Appendix A: Cleaning the Monitor 21
Appendix B: Available Input Signals 22
IP69K Stainless Display Quick Start Guide Preface
3
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received
including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a
class "B" digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at him own expense.
European Union
Electromagnetic Compatibility Directive (2014/30/EU)
•EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
•EN55032: 2012/AC:2013
•EN61000-3-2:2014
•EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
•EN 60950-1:2006/A11:2009/A1:2010/A12:2011/
A2:2013
This equipment is in conformity with the requirement of the following EU
legislations and harmonized standards. Product also complies with the
Council directions.
IP69K Stainless Display Quick Start Guide Preface
4
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in
any form or by any means, electronic or mechanical, for any purpose, without the
prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their
respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order
to improve design and/or performance. We assume no responsibility or liability for
the use of the described product(s) conveys no license or title under any patent,
copyright, or masks work rights to these products, and make no representations
or warranties that these products are free from patent, copyright, or mask work
right infringement, unless otherwise specified. Applications that are described in
this manual are for illustration purposes only. We make no representation or
guarantee that such application will be suitable for the specified use without
further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be free from
material and workmanship defects for a period of one year from the invoice date.
If the customer discovers a defect, we will, at his/her option, repair or replace the
defective product at no charge to the customer, provide it is returned during the
warranty period of one year, with transportation charges prepaid. The returned
product must be properly packaged in its original packaging to obtain warranty
service. If the serial number and the product shipping data differ by over 30 days,
the in-warranty service will be made according to the shipping date. In the serial
numbers the third and fourth two digits give the year of manufacture, and the fifth
digit means the month (e. g., with A for October, B for November and C for
December).
For example, the serial number 1W17Axxxxxxxx means October of year 2017.
IP69K Stainless Display Quick Start Guide Preface
5
Customer Service
We provide a service guide for any problem by the following steps: First, visit the
website of our distributor to find the update information about the product.
Second, contact with your distributor, sales representative, or our customer
service center for technical support if you need additional assistance.
You may need the following information ready before you call:
•Product serial number
•Software (OS, version, application software, etc.)
•Description of complete problem
•The exact wording of any error messages
In addition, free technical support is available from our engineers every business
day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections
while the power is on. Sensitive electronic components can be
damaged by sudden power surges.
Only experienced electronics
personnel should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque
vous travaillez sur celui-
ci. Ne pas brancher de connections
lorsque l’alimentation est présente. Des composantes
électroniques sensibles peuvent être endommagées par des sauts
d’alimentation. Seulement du personnel expérimenté devrait ouvrir
ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static
electric charges. As a safety precaution, use a
grounding wrist strap at all times. Place all electronic components
in a static-dissipative surface or static-shielded bag when they are
not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements
électroniques moderns sont très sensibles aux décharges
d’électricité statique. Toujours utiliser un bracelet de mise à la
terre comme précaution. Placer toutes les composantes
électroniques sur une surface conçue pour dissiper les charge, ou
dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.
IP69K Stainless Display Quick Start Guide Preface
6
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful
information or to alert you to the potential for hardware damage or personal injury.
These are Notes, Important, Cautions, and Warnings. The following is an
example of each type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to know.
CAUTION/ ATTENTION
A Caution alert indicates potential damage to hardware and explains how
to avoid the potential problem.
Une alerte d’attention indique un dommage possible à l’équipement et
explique comment éviter le problème potentiel.
WARNING!/ AVERTISSEMENT!
An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.
Un Avertissement de Choc Électrique indique le potentiel de chocs sur
des emplacements électriques et comment éviter ces problèmes.
IP69K Stainless Display Quick Start Guide Introduction
7
❶INTRODUCTION
Congratulations on purchasing Winmate® IP69K Stainless P-Cap Display.
Winmate flat stainless steel P-Cap Display is designed for applications with high
hygienic requirements. IP69K series is completely waterproof with IP69K level of
protection allowing for easy cleaning and sterilization.
The IP69K stainless series work well in food, beverage industry, including food
processing operations and packaging, chemical manufacturing and other
industrial applications.
1.1 Features
The IP69K Stainless P-Cap Display features:
•SUS 316/ AISI 316 stainless steel for food and chemical industries
•Full IP69K waterproof enclosure, good corrosion resistance
•A true flat, easy-to-clean front surface with edge-to-edge design
•Flat multi-touch panel pc with superior readability and P-CAP technology
•Various mounting solutions, Yoke mount and VESA mount
•VGA, USB, DVI-D input
•Waterproof ports with adapter cables for external connectivity
•Supports VESA mount
IP69K Stainless Display Quick Start Guide Introduction
8
1.2 Package Content
Carefully remove the box and unpack your device. Please check if all the items
listed below are inside your package. If any of these items are missing or
damaged contact us immediately.
Factory shipment list:
Display Quick Start Guide
(Hardcopy)
R-series AD Board
Manual (Hardcopy)
Varies by product
specifications Part No. 915211101031 Part No. 91521112100C
AC Adapter Power Cable* VGA Cable
50W 90PO12050002
80W 90PO12080003 Varies by country Part No. 944115010000
USB Cable (For Touch) DVI Cable (Optional) VESA Screws
Part No. 948704010000 Part No. 9455255250Q1 Part No. 913511101101
IP69K Stainless Display Quick Start Guide Introduction
9
1.3 Product Overview
This section contains mechanical drawing of the Display. Notice that this is a
simplified drawing and some components are not marked in detail.
1.3.1 Dimensions 10.4"
Unit: mm
Dimensions : 289 x 246 x 49.9
1.3.2 Dimensions 15"
Unit: mm
Dimensions : 378 x 301 x 56.4
IP69K Stainless Display Quick Start Guide Introduction
10
1.3.3 Dimensions 19”
Unit: mm
Dimensions : 467.4 x 392 x 56.6
1.3.4 Dimensions 21.5”
Unit: mm
Dimensions : 541 x 337 x 53
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Monitor de Winmate
Winmate
Winmate W07FA3S-PCM1AC-PoE Manual de usuario
Winmate
Winmate PT Series Manual de usuario
Winmate
Winmate W15L100-PTA3-ME Manual de usuario
Winmate
Winmate M270TF-SDI Manual de usuario
Winmate
Winmate R10L100-PPT2HB Manual de usuario
Winmate
Winmate R19L100-MLM1 Manual de usuario
Winmate
Winmate R15L600-65C3-DVI Manual de usuario
Winmate
Winmate W07L100-GSO1 Manual de usuario
Winmate
Winmate DS424PMB Manual de usuario
Winmate
Winmate R19L100-MLA3 Manual de usuario
Winmate
Winmate R15L100-POC3-C Manual de usuario
Winmate
Winmate R10L OF TR Series Manual de usuario
Winmate
Winmate W07L100-POT1-C Manual de usuario
Winmate
Winmate R19L100-67FTP Manual de usuario
Winmate
Winmate Open Frame Display Manual de usuario
Winmate
Winmate R05T100-PMD1HB Manual de usuario
Winmate
Winmate W07L100-GCT1-C Manual de usuario
Winmate
Winmate R15L600-MLA3FP Manual de usuario
Winmate
Winmate R15L100-VMC3HB Manual de usuario
Winmate
Winmate M270TF-XXX Manual de usuario
