Winmate W07FA3S-PCM1AC-PoE Manual de usuario

Please read these instructions carefully before using this product, and save this manual for future use.

7” S-Series HMI

W07FA3S-PCM1AC-PoE

W07FA3S-PCM1-PoE

Quick Start Guide

V1.1

For more information on this and other Winmate

products, please visit our website at:

www.winmate.com

Document Part Number: 9152070I1001

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

class "B" digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at him own expense.

European Union

Electromagnetic Compatibility Directive (2014/30/EU)

EN55024: 2010/ A1: 2015

oIEC61000-4-2: 2009

oIEC61000-4-3: 2006+A1: 2007+A2: 2010

oIEC61000-4-4: 2012

oIEC61000-4-5: 2014

oIEC61000-4-6: 2014

oIEC61000-4-8: 2010

oIEC61000-4-11: 2004

EN55032: 2012/AC:2013

EN61000-3-2:2014

EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the

Council directions.

iii

No part of this document may be reproduced, copied, translated, or transmitted

in any form or by any means, electronic or mechanical, for any purpose, without

the prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order

to improve design and/or performance. We assume no responsibility or liability

for the use of the described product(s) conveys no license or title under any

patent, copyright, or masks work rights to these products, and make no

representations or warranties that these products are free from patent, copyright,

or mask work right infringement, unless otherwise specified. Applications that

are described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the

specified use without further testing or modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be free from

material and workmanship defects for a period of one year from the invoice date.

If the customer discovers a defect, we will, at his/her option, repair or replace the

defective product at no charge to the customer, provide it is returned during the

warranty period of one year, with transportation charges prepaid. The returned

product must be properly packaged in its original packaging to obtain warranty

service. If the serial number and the product shipping data differ by over 30

days, the in-warranty service will be made according to the shipping date. In the

serial numbers the third and fourth two digits give the year of manufacture, and

the fifth digit means the month (e. g., with A for October, B for November and C

for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the

website of our distributor to find the update information about the product.

Second, contact with your distributor, sales representative, or our customer

service center for technical support if you need additional assistance.

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every business

day. We are always ready to give advice on application requirements or specific

information on the installation and operation of any of our products.

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronics

personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque

vous travaillez sur celui-ci. Ne pas brancher de connections

lorsque l’alimentation est présente. Des composantes

électroniques sensibles peuvent être endommagées par des sauts

d’alimentation. Seulement du personnel expérimenté devrait ouvrir

ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge

statique avant de toucher la carte CPU. Les équipements

électroniques moderns sont très sensibles aux décharges

d’électricité statique. Toujours utiliser un bracelet de mise à la

terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou

dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.

CONTENTS

INTRODUCTION 3

Features 3

Package Content 4

Product Overview 6

GETTING STARTED 7

Turning On Your Device 7

Configuring Serial Port Settings 8

Brightness Adjustment 10

Operating the HMI Device 11

Setting up the Device 11

Home Screen 11

Quick Settings 12

Ethernet 13

Configuring Ethernet 14

Checking Ethernet 14

Testing LED Status Light Bar 15

Reading NFC Tag 16

Using Front Camera 18

The Camera Menu 18

Winmate® Home Manager (WHM) 22

How to Lock Application 22

How to Unlock Application 25

How to Change Password 26

Turning Off Your Device 26

INSTALLATION 27

Wiring Requirements 27

Connecting to Other Devices 28

Power Input Connector 28

Serial Port Connector 28

USB 2.0 Connector 28

Ethernet Connector 29

USB OTG Connector 29

Micro SD Card Slot 29

Mounting 30

Panel Mounting 30

VESA Mounting 31

SPECIFICATIONS 35

HMI Device Specifications 35

Supported NFC Tag 36

APPENDIX 37

Appendix A: Cleaning the Monitor 37

Appendix B: Winmate Software Development Kit 38

Winmate Download Center 38

Winmate File Share 38

Android Debug Bridge (ADB) 38

INTRODUCTION

Congratulations on purchasing Winmate® 7” S-Series HMI. Interactive and

smart automation systems of intelligent buildings are in a fast growing phase.

Winmate® multi-touch S-Series HMI is suitable for home automation and room

management systems. Flat surface is easy-to-clean and delivers aesthetically

pleasing look for any interior. By connecting to centralized database, it can

provide real time update for booking status and available schedule, or perform

as a synchronous display in meetings.

Winmate® 7” S-Series HMI powered by Freescale® Cortex® A9 i.MX6 Dual

Core 1GHz (optional Quad Core) processor and supports Android, Linux Kernel,

and Ubuntu operating systems. The HMI device features P-Cap touch-screen.

The HMI device features P-Cap touch-screen. In addition, the HMI device model

supports an exceptional feature - LED Light Bar. With the help of red, green and

blue LED indicators you can see the status of the machine or processes afar. It

significantly reduces power consumption by keeping the display turned off.

Features

Winmate® 7” S-Series HMI features:

1024 x 600 screen resolution with P-CAP touchscreen

Freescale® Cortex® A9 i.MX6 Dual Core 1GHz (optional Quad Core)

Android, Linux Kernel or Ubuntu OS

Fanless cooling system and Ultra-low power consumption

Front IP65 water and dust proof; Rear IP22

Dual Gigabit Ethernet

LED Light Bar on the front side

Optional 2MP Front Camera

Optional NFC Reader

Power over Ethernet (PoE)

Stylish design for room booking, access control and room information

applications

Package Content

Carefully remove the box and unpack your device. Please check if all the items

listed below are inside your package. If any of these items are missing or

damaged contact us immediately.

Standard factory shipment list:

7” HMI Device

Quick Start Guide

(Hardcopy)

Driver CD & User

Manual

Varies by product

specifications

9152070I1001

9171111I102P

AC Adapter

(12V/ 50W)

Power Cord

2 Pin Terminal Block

922D050W12VA

Varies by country

94J602G020K0

VESA Mount Screws

VESA Plate

75 x 75 mm

External USB A Type

to Micro USB Cable

913511101145

82W70J17Y700

9487049050K0

Package may include optional accessories based on your order:

VESA Desk Stand

PCVS-V1

VESA Desk Stand

LA-100

VESA Wall Mount

Bracket

LA-106

99KK00A0000E

9B0000000128

9B0000000412

Product Overview

Unit: mm

№

Description

№

Description

󰪦

Console Port (for Linux)

󰪫

USB 2.0

󰪧

Micro SD Card Slot

󰪬

12V DC

󰪨

LAN/ PoE*

󰪭

2MP Front Camera (Optional)

󰪩

USB OTG

󰪮

1W Speaker

󰪪

RS-232/422/485

󰪯

LED Status Light Bar**

*Power Device (PD): follows IEEE 802.3at (25 W), IEEE 802.3af (15 W)

**RGB LED light bar only available for the model number W07FA3S-PCM1AC-PoE

Otros manuales para W07FA3S-PCM1AC-PoE

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de Winmate

Winmate

Winmate R15L100-GCC3-C Manual de usuario

Winmate

Winmate R15L100-MLC3HB Manual de usuario

Winmate

Winmate R15L600-MLA3FP Manual de usuario

Winmate

Winmate Front IP65 Display Series Manual de usuario

Winmate

Winmate W55L100-OML2 Manual de usuario

Winmate

Winmate G-WIN Slim IP65 Manual de usuario

Winmate

Winmate R19L100-MLM1 Manual de usuario

Winmate

Winmate W32L100-PTA1-SDI Manual de usuario

Winmate

Winmate R19L100-67FTP Manual de usuario

Winmate

Winmate GC Series Manual de usuario

Winmate

Winmate P Series Manual de usuario

Winmate

Winmate W27L100-CHC1 Manual de usuario

Winmate

Winmate R15L600-65A1FTP Manual de usuario

Winmate

Winmate W07L100-POT1-C Manual de usuario

Winmate

Winmate W07L100-GST1-C Manual de usuario

Winmate

Winmate R17L100-RKA1ML Manual de usuario

Winmate

Winmate R15L600-65C3-1 Manual de usuario

Winmate

Winmate W24L100-SPA269 Manual de usuario

Winmate

Winmate M270TF-SDI Manual de usuario

Winmate

Winmate R10L CH Series Manual de usuario

Winmate

Winmate W24L100-SPA2 Manual de usuario

Winmate

Winmate R10L100-67T2ST Manual de usuario

Winmate

Winmate PT Series Manual de usuario

Winmate

Winmate R10L OF TR Series Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación