Wali GSDM002 Manual de usuario

INSTALLATION MANUAL

[email protected]

75x75/100x100 32"

MAX 1 8kg

(2.2~17. 6lbs )

R AT E D

GSDM002

GSDM002W

Dual Monitor Desk Mount

Supplied Parts List

Arm

A(x2)

Pole

E(x1)

VESA Plate

D(x2)

C-Clamp

B(x1)

Décor Cover

C(x1)

Pole Screw

H(x3)

Top Screw

G(x2)

Tool Holder

F(x1)

Allen Key 3mm

L(x1)

Bottom Grommet Plate

I(x1)

Top Grommet Plate

K(1)

Décor Cover

J(x1)

Allen Key 6mm

M(x1)

X 2

M4x12 Bolt

M-A(x4)

M4x16 Bolt

M-B(x4)

M5x12 Bolt

M-C(x4)

M5x16 Bolt

M-D(x4)

D5 Washer

M-E(x4)

Spacer

M-F(x4)

Step 1

Step 2

1. Loosen the screws using Allen Key 6mm Mto adjust the preferred height range option and tighten the screws back.

2. Fix the Décor Cover Conto C-Clamp B.

C-clamp: Up to 3.1”

Grommet: Up to 1.6”

Option A Clamp Installation

1.4"-3.1"

0.4"-1.8"

Step 2

Option A

Clamp Installation

Option B

Grommet Base Installation

3. Place the Pole Eonto the top of C-Clamp B,connect Pole Eand C-Clamp Bfrom the bottom using

Pole Screw Hand tighten with Allen Key 3mm L.

Hand knob

1. Loosen the screws on C-Clamp Busing Allen Key 6mm Mfirstly, then loosen the screw to release the

hand knob using Screwdriver as shown in second image. (Screwdriver needed but not included)

Step 2

Option B

Grommet Base Installation

2. Guide Décor Cover J through Pole E, place the Pole Eonto Top Grommet Plate Kand connect them from the

bottom using Pole Screw Hand tighten with Allen Key 3mm L.

3a Existing Grommet Hole Installation

Max 1.6”

Hand knob

If the existing grommet hole comes with a plastic protector, remove it to ensure a flat surface before installing the desk

mount. Place the assembled Pole onto the desk hole, guide the Bottom Grommet Plate I

through the hand knob.

Rotate the knob clockwise to fasten for stability.

Step 2

Step 3

Option B

Grommet Base Installation

3b Self-drilled Grommet Hole Installation

ø 10mm

(ø ")3/8

Put the Tool Holder Fand Arm Athrough the Pole E, adjust the preferred height and tighten using Allen Key 6mm M.

Max 1.6”

Hand knob

Grommet Base Installation

Grommet Base InstallationGrommet Base Installation

Mark the position of the hole on your mounting surface. Drill a 3/8"(10mm) diameter hole at the marked position

through the mounting surface. Place the assembled Pole onto the desk hole, guide the Bottom Grommet Plate I

through the hand knob.

Rotate the knob clockwise to fasten for stability.

and Spacertogether with D5 Washer

Select M4x16 Bolt or M5x16 Bolt

according to your TV/Monitor,connect VESA Plate

together with D5 Washer

or M5x12 BoltSelect M4x12 Bolt

Grommet Base Installation

Step 4

Step 4.3a Step 4.3b

M-A M-C

M-E into the mounting

holes on the back of TV/Monitor, tighten with

screwdriver.(Screwdriver needed but not included)

M-B M-D

M-E M-F

into

the mounting holes on the back of TV/Monitor,

tighten with screwdriver.(Screwdriver needed but not

included)

Step 4.1

Select TV Screws

Step 4.2

Select Spacers ( if needed )

M-E

M-C

M-A

Hand thread screws

into the threaded

inserts on the back of

your TV to determine

which screw diameter

(M4 or M5) to use.

M4 M5

M-E

M-F

M-B

M-D

Put the assembled TV/Monitor onto the Arm A and ensure the stability, tighten the VESA plate using Top Screw G .

Step 5

Step 6

A G

Pull the bottom cable slot cover to the VESA direction to detach it off the arm.

Guide the cable through the cable slot and slide the cover back to arm.

Press the Arm A on horizontal level as image shown, adjust gas spring tension to your personal preference using

Allen Key 6mm M , adjust the tilt tension using Allen Key 6mm A .

Step 8

Step 7

For Heavier Monitors

For Lighter Monitors

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Rack y soporte de Wali

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario