Wali MATI001-G Manual de usuario

INSTALLATION MANUAL

[email protected]

75x75/100x100 32"

MAX 2~9.9kg

( 4.4~22lbs)

RATED

MATI001-G

MATI001-W

Single Monitor Desk Mount

Supplied Parts List

Arm

A (x1)

Bolt

I (x1)

M6x12 Bolt

J (x3)

Arm

B (x1)

VESA Plate

C (x1)

Spring Washer

K (x1)

Anti-skid Pad

M (x2)

M5x12 Bolt

M-B (x4)

Nut

L (x1)

Base

F (x1)

Bottom Grommet Plate

H (x1)

Plate

G (x1)

Allen Key 4mm

N (x1)

Fit clamp: 0.4”-3.3”

Grommet: 0.4”-3.1“

Allen Key 5mm

O (x1)

Wrench

P (x1)

C-Clamp

D (x1)

C-Clamp Brace

E (x1)

M4x12 Bolt

M-A (x4)

D5 Washer

M-C (x4)

Step 1

Step 2

Option A

Clamp Installation

2. Loosen the Bolts on the C-Clamp Brace Eusing Allen Key 4mm Nto the preferred height according to your desk thickness.

Hang the C-Clamp Don the bolts and tighten using Allen Key 4mm N.

Leave 6mm gap

0.4’’-2.2’’

1.4’’-3.3’’

1. Connect the C-Clamp Brace Eto the Base Fusing 3 pcs M6X12 Bolt Jand tighten with Allen Key 4mm N. Tear off the

protective paper to attach Anti-Skid Pad Mto the bottom designated position of Base as the image shown.

Step 2

Option B

Grommet Base Installation

3. Rotate the knob clockwise to fasten for stability.

1. Attach the Plate Gto the Base Ffrom the bottom using 3 pcs M6X12 Bolt Jand tighten with Allen Key 4mm N.

Tear off the protective paper to attach Anti-Skid Pad Mto the bottom designated position of Base as the image shown.

2a. Existing Grommet Hole Installation

If the existing grommet hole comes with a plastic

protector, remove it to ensure a flat surface before

installing the desk mount.

Mark the position of the hole on your mounting surface.

Drill a 3/8"(10mm) diameter hole at the marked position

through the mounting surface.

2b. Self-drilled Grommet Hole Installation

0.4’’-3.1’’

Φ0.4’’-2.4’’

ø 10mm

(ø ")3/8

3. Insert Bolt Ithrough the Base Fand mounting surface. Guide Bottom Grommet Plate H, Spring Washer K,

and Nut Lthrough Bolt Ifrom the bottom . Fasten the Nut Lusing the provided Wrench P.

Step 3

Connect the Arm B to the Base Fand tighten with Allen Key 4mm N.

Connect the Arm Ato the Arm Band tighten with Allen Key 4mm N.

Hand thread screws

into the threaded

inserts on the back

of your TV to

determine which

screw diameter

(M4) or (M5) to use.

M5x12M4x12

Step 4

Step 5

Turn the knob on the VESA Plate Cto the unlock position, slide the assembled TV/Monitor onto the Arm A

and ensure the stability. Turn the knob to the lock position.

Select M4x12 Bolt M-A or M5x12 Bolt M-B according to your TV/Monitor, connect VESA Plate Ctogether with D5

Washer M-C into the mounting holes on the back of TV/Monitor, tighten with screwdriver. (Screwdriver needed but not

included) UnlockLockM-A

M-B

M-C

Step 4.1

Step 4.2

Step 6

To properly balance the arm with monitors mounted, adjust the spring tension with Allen Key 5mm O.

For heavier monitors, turn the adjustment screw

clockwise until it stays in a horizontal position.

First, position and firmly hold the arm horizontally

as shown. Ask for assistance should you require it.

CAUTION: To avoid damage to monitors or

mount, always keep the arm in a horizontal

position while making adjustments.

Again, ask for assistance if required.

For Lighter Monitors, turn the adjustment

screw counter-clockwise until it stays

in a horizontal position.

CAUTION:

· Do not over tighten the screws.

· To prevent damage to the Tension Indicator,

never allow the Red Indicator Line move

beyond the "-" and "+" found on the Left and

Right Side of the tension indicator.

Step 7

Step 8

±180°

±90°

Tighten the limiting screw

(do not overtighten). Arm can rotate 180°.

Remove or loosen the limiting screw. Arm can rotate without stopping.

Pull the bottom cable slot cover to detach it off the arm. Guide the cable through the cable slot and slide the cover back to arm.

Screw Adjustable to prevent monitor arm from swinging into screens or walls.

Este manual sirve para los siguientes modelos

Otros manuales de Rack y soporte de Wali

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario