VMP LCD-2537C Manual de usuario

For more information, please contact us at:

325 Log Canoe Circle, Stevensville, Maryland 21666

(T) 410.643.6390 / (F) 410.643.6615

www.videomount.com

VIDEO MOUNT PRODUCTS

Instruction Sheet For:

LCD-2537C & LCD-2537CB

Step1

Before starting, lay out all parts to your mount and match them to

the parts list provided. Verify that you have all your parts before at-

tempting to assemble the mount.

Step 2

Determine which VESA standard plate you will be using or

(75mm/100mm or 200mm/100mmx200mm respectively) and at-

tach the selected mounting plate or to the swivel bracket

using the M6 screw and the nylon nut . (Set this assembly

safely to the side for now.)

Step 3

Mark the ceiling or desired mounting surface in preparation of in-

stallation of wall mounting plate . Pre-drill if necessary and mount

wall plate to desired surface. Mount wall plate with small welded

rotation stoppers to the bottom of the plate. Warning: Please verify

that your mounting surface will support the combined weight of your

mount, mounting hardware, and monitor. Also verify that the mount-

ing surface is safe to drill through. If in doubt, please contact a pro-

fessional installer.

Step 4

Attach the swivel bracket assembly from step 2 to the support tube

using the 3/8” screw , washers and nylon nut . Insert

adjustable screw into the back of the swivel bracket for use

when tilting the monitor.

Step 2: Attaching the mounting

plate to the pivot bracket

Step 3: Attaching the ceiling plate

to the ceiling.

(Lag Screws not included)

Step 4: Attaching the swivel

bracket to the support tube.

VIDEO MOUNT PRODUCTS

1

1

4

83 15

16

12

5

6

56

97

4

Step 5

Attach the support tube to the extension tube using the 3/4”

screw and washers .

Step 6

Attach the mounting plate assembly from step 2 to your LCD moni-

tor using the M4 or M5 screws or as appropriate.

Step 7

Attach the extension tube to the ceiling plate using the

5/16” screw and nylon nut . Secure the 3/4” screw from

slipping in the extension tube by tightening the ¼” brake screw

into the threaded hole in the side of the extension tube using

the Allen key .

Step 8

Insert end plugs into the support tube . For cable manage-

ment, insert the cable clips by pushing the arrow ends into the

square holes in the support tube . Please verify that all nuts and

screws are securely tightened.

Step 5: Attaching the support

tube to the extension tube

Step 6: Attaching the monitor

to the mounting plate

Step 7 : Connecting the exten-

sion tube to the ceiling plate

WARNING: The installer of these products must verify that the mount-

ing surface, ceiling or wall, will safely support the combined weight

of all attached equipment and hardware. Video Mount roducts will

not be held liable for the improper use or installation of its products.

Enjoy Your Mount!

32

11

1

2

2

17

18 19 10

2

21 22

3

10

20

14

3

13

Este manual sirve para los siguientes modelos

1

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario