Vitek VTC-BHOC6R4F Manual de usuario
External OSD
Controls
for Ease of
installation
VITEK
FEATURES:
• 1/3” 2.1 MegaPixel Progressive Scan CMOS sensor w/
NVP2420 DSP
• 2.1 MegaPixel With full 1080p 3G-SDI (SMPTE 424M) @
60fps / 30fps HD-SDI (SMPTE 292M) @ 30fps Output
• 30 850nm Dynamic Intensity IR LEDs with 115’ Range
• MegaPixel IR Corrected 3.6mm Fixed Iris lens Included
• Mechanical IR Cut Filter (True Day/Night)
• XD-DNR (2D-DNR + 3D-DNR) Noise Reduction
• 16:9 Video format
• Advanced OSD Functions: Defog, Dynamic IR, WDR,
Motion Detection, Privacy mask, Mirror, BLC/HLC, D-Zoom
• 100% Pure Digital Transmission of video data
• Up to 700’ HD Transmission Range (Depending on cable
characteristics and integrity)
• IP67 Weather Resistance
• 12VDC Operation
VTC-BHOC6R4F
2.1MP 3G-SDI IP67 Vandal Resistant WDR True
Day/Night Bullet Camera with 3.6mm Lens &
30 IR LEDs
2
WARNINGS
The camera needs periodic inspection.
• Contact an authorized technician for inspection.
Stop using camera if there is a malfunction.
• Avoid installing camera in high heat areas, risk of fire may occur.
Do not install the camera on a surface that can not support it.
• Unless the surface is suitable, injury or other hazards may occur.
Do not disassemble the camera.
• It may result in fire, electric shock or other hazards.
Do not hold plug with wet hands.
• It could cause an electric shock.
Do not use the camera close to a gas or oil leak.
• It may result in fire or hazards.
3
PRECAUTIONS
ØDo not install the camera in extreme temperature conditions.
• Only use the camera under conditions where temperatures are
between -14˚F and +122˚F. Be especially careful to provide ventilation
when operating under high temperatures.
ØDo not drop the camera or subject it to physical shocks.
• It may cause malfunctions to occur.
ØNever point camera into a strong light source, such as the
sun or bright spotlight.
• It can damage the CMOS Sensor.
ØDo not expose the camera to radioactivity.
• This will damage the CMOS sensor.
NOTE
• If the camera is exposed to spotlight or object reflecting strong
light, smear or blooming may occur.
• Please check power specs before connecting power.
4
• 1/3” 2.0 Mega-Pixel Panasonic Progressive Scan Sensor
• Resolution: 1920 x 1080 (30P/25P, 60P/50P, 60i/50i)
• HD-SDI / SMPTE 292M (30P/25P HD-SDI), SMPTE 424M
(60P/50P 3G SDI) Video Output
• HD over Coaxial Cable
• Uncompressed HD Digital Video
• WDR
• True Day/Night by ICR
• Smart 3DNR, 2DNR / Smart IR
• RS-485 (Pelco®-D) Remote Control, Coaxial Cable Comm.
• Sens-UP: 2x ~ 30x
• Motion Detect, Mirror, Privacy Mask, De-fog, BLC/HLC, D-Zoom
FEATURES
5
Setup Menu (OSD)
[How to operate OSD joy stick]
OSD menu is controlled by OSD joystick in OSD Board or OSD Cable
-▲(UP), ▼(DOWN), ◀(LEFT), ▶(RIGHT),●(SET / ENTER)
[Menu Tree]
07
SETUP MENU (OSD)
6
[Menu Tree]
MENU TREE
7
[Menu Tree]
MENU TREE
8
[Menu Tree]
MENU TREE
9
Main OSD Menu
MAIN MENU
DEFAULT
DESCRIPTION
LENS
DC
Select Lens type according to mounted or built-in lens
EXPOSURE
Set SHUTTER, AGC, SENS-UP, BRIGHTNESS,
D-WDR &, DEFOG
BACK LIGHT
A
Select WDR, BLC, HSBLC or OFF
WHITE BAL ATW
* ATW(Auto Tracking White Balance) * AWC ->
SET : White Balance is fixed at the value when
*(enter) is pressed and keeps the value
* INDOOR : White Balance is fixed at about 3100K
* OUTDOOR : White Balance is fixed at about 5100K
* Manual : Adjustable value of BLUE and RED
DAY&NIGHT AUTO
* AUTO: DAY or NIGHT is set automatically by light
level coming in through lens. DELAY TIME, D -> N
and N -> D, can be set in the menu
* COLOR : Color video output * B/W : B/W video
output regardless of light level
(removes IR cut filter automatically)
* EXT : Day(Color) or Night(B/W) is decided by
external light sensor(CDS sensor)
All IR LED cameras should be set to EXT.
NR
* Set 2DNR, 3DNR, LEVEL, SMART NR
SPECIAL
* Set CAM TITLE, D-EFFECT, MOTION, PRIVACY,
LANGUAGE,DEFECT & RS 485
ADJUST
* Set SHARPNESS, MONITOR, LSC, TV SYSTEM
(Video Out), RESOLUTION & FRAME RATE
RESET
* Push • (Enter) at FACTORY, all parameters return
to factory default.
EXIT
* Save all and Exit
MAIN OSD MENU
10
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara de seguridad de Vitek
Vitek
Vitek Transcendent VTD-TND8RMEA Manual de usuario
Vitek
Vitek TRANSCENDENT VTD-T4D6HR8MD Manual de usuario
Vitek
Vitek Transcendent VTC-TNB4RFAD-2 Manual de usuario
Vitek
Vitek Transcendent VTC-THB5RM Manual de usuario
Vitek
Vitek VTD-TND4RFS Manual de usuario
Vitek
Vitek VTC-HOCRBDE4F Manual de usuario
Vitek
Vitek VTC-TTAB42R2F Manual de usuario
Vitek
Vitek VT-PTZ26 Manual de usuario
Vitek
Vitek VTD-HOCR2812/V Manual de usuario
Vitek
Vitek VTD-MH2910 Manual de usuario
Vitek
Vitek Transcendent VTC-TNB5RME Manual de usuario
Vitek
Vitek TRANSCENDENT VTC-TNB48R4M2 Manual de usuario
Vitek
Vitek VTC-IRH70 Manual de usuario
Vitek
Vitek Transcendent Series Manual de usuario
Vitek
Vitek VTC-C680 Manual de usuario
Vitek
Vitek Transcendent VTD-THMD2RF Manual de usuario
Vitek
Vitek VTC-IRT40-2812 Manual de usuario
Vitek
Vitek VT-PTZ36W Manual
Vitek
Vitek VTC-HD713A Manual de usuario
Vitek
Vitek Transcendent VTC-TNT8RMS Manual de usuario
