VIA Technologies EPIA-CL Manual de usuario
VIA Mainboard
User’s Manual
EPIA-CL
Mini-ITX Mainboard
P/N 99-51-012661-11
Version 1.20
June 13, 2008
Copyright
Copyright by VIA Technologies Inc. (“VIA”). No part of this manual may be reproduced or
transmitted in any form without express written authorization from VIA.
Trademarks
All trademarks are the property of their respective holders.
PS/2 is a registered trademark of IBM Corporation.
Windows 95/98/98SE/ME/2000/NT and Windows XP are registered trademarks of Microsoft.
AwardBIOS is a registered trademark of Phoenix Technologies Ltd.
Data protection
All data should be backed-up prior to the installation of any drive unit or storage peripheral.
VIA will not be responsible for any loss of data resulting from the use, disuse or misuse of this
or any other VIA product.
No Warranty
VIA has made every effort to ensure the accuracy of the content of this manual. However, it is
possible that it may contain technical inaccuracies or typographical or other errors. Our
products are under continual improvement and we reserve the right to make changes without
notice. VIA will assume no liability for any inaccuracy found in this publication, nor for
damages, direct, indirect, incidental, consequential or otherwise, that may result from such an
inaccuracy, including without limitation loss of data or profits.
VIA provides this manual “as is”, and does not issue a warranty of any kind, express or
implied, including without limitation implied warranties of merchantability or fitness for a
particular purpose.
The information provided in this manual is subject to change without notice. VIA reserves the
right to alter product designs, layouts or drivers without notification.
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at his
own expense.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with
the emission limits.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Safety Instructions
1. Always read the safety instructions carefully.
2. Keep this User's Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection hence protects the equipment from
overheating. DO NOT COVER THE OPENINGS.
6. Make sure the voltage of the power source and adjust properly 110/220V before
connecting the equipment to the power inlet.
7. Place the power cord in such a way that people cannot step on it. Do not place anything
over the power cord.
8. Always unplug the power cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening. Liquid can cause damage or electrical shock.
11. If any of the following situations arises, get the equipment checked by a service personnel:
•The power cord or plug is damaged
•Liquid has penetrated into the equipment
•The equipment has been exposed to moisture
•The equipment has not work well or you cannot get it work according to User's
Manual.
•The equipment has dropped and damaged
•If the equipment has obvious sign of breakage
12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED,
STORAGE TEMPERATURE ABOVE 60 C (140F), IT MAY DAMAGE THE
EQUIPMENT.
Caution:
Only use the appropriate battery specified for this product.
Do not reuse, recharge, or reheat an old battery.
Do not attempt to force open the battery.
Do not discard used batteries with regular trash.
Discard used batteries according to local regulations.
i
BOX CONTENTS
•1 x VIA Mainboard
•1 x User’s Manual
•1 x Floppy Ribbon Cable
•1 x ATA-33/66/100/133 IDE Ribbon Cable
•1 x I/O Bracket
•1 x Driver Utilities CD
ii
TABLE OF CONTENTS
Box Contents......................................................................... i
Table of Contents ..................................................................ii
Chapter 1 ............................................................................ 1
Specifications .................................................................... 1
Mainboard Specifications ..................................................... 2
Mainboard Layout............................................................... 4
Back Panel Ports ................................................................ 5
Slots ................................................................................ 5
Onboard Connectors and Jumpers......................................... 6
Chapter 2 ............................................................................ 7
Installation........................................................................ 7
CPU ................................................................................. 8
Memory Module Installation ................................................10
Connecting the Power Supply ..............................................12
Back Panel Ports ...............................................................13
Connectors.......................................................................17
Jumpers...........................................................................24
Slots ...............................................................................25
Chapter 3 ...........................................................................27
BIOS Setup ......................................................................27
Entering Setup..................................................................28
Control Keys.....................................................................28
Getting Help.....................................................................29
Main Menu .......................................................................30
Standard CMOS Features ....................................................32
IDE Primary Master/Slave, Secondary Master/Slave ................33
Advanced BIOS Features ....................................................34
Advanced Chipset Features .................................................38
Integrated Peripherals .......................................................40
Power Management Setup ..................................................44
PNP/PCI Configurations......................................................49
PC Health Status ...............................................................52
Frequency / Voltage Control ...............................................53
Load Fail-Safe Defaults ......................................................56
iii
Load Optimized Defaults.....................................................57
Set Supervisor / User Password ...........................................58
Save & Exit Setup .............................................................60
Exit Without Saving ...........................................................61
Chapter 4 ...........................................................................63
Driver Installation .............................................................63
Driver Utilities ..................................................................64
CD Content ......................................................................65
iv
This page is intentionally left blank.
1
C
HAPTER
1
Specifications
The ultra-compact and highly integrated VIA EPIA-CL Mini-ITX
Mainboard is the smallest form factor mainboard specification
available today, developed by VIA Technologies, Inc. as part of
the company’s open industry-wide total connectivity initiative.
The mainboard enables the creation of an exciting new
generation of small, ergonomic, innovative and affordable
embedded systems. Through high level of integration, mini-ITX
only occupy 66% of the size of FlexATX mainboard form factor.
The mainboard comes with an embedded VIA Processor, boasting
ultra low power consumption and cool, quiet operation.
Chapter 1
2
MAINBOARD SPECIFICATIONS
CPU
•VIA C3 / EDEN EBGA Processor (onboard)
•Enhanced Ball Grid Array Package (EBGA)
•Internal L1 128KB and L2 64KB cache memory
Chipset
•VIA CLE266 North Bridge
•VT8235 South Bridge
Memory
•1 x DDR266 DIMM socket (up to 1 GB)
Expansion Slot
•1 x PCI
Graphics
•Integrated VIA UniChrome AGP graphics
Audio
•VT1612A, two-channel AC’97 Codec
USB
•USB 2.0 Support included in South Bridge
LAN
•Dual LAN
oVIA VT6105 LOM 10/100 Base-T Ethernet
oVT6103 PHY
IDE
•2 X UltraDMA 66/100/133 Connector
LVDS (optional)
•Chrontel CH7019 LVDS Transmitter
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Placa madre de VIA Technologies
VIA Technologies
VIA Technologies EPIA-LT Manual de usuario
VIA Technologies
VIA Technologies K8T800 Manual de usuario
VIA Technologies
VIA Technologies VB7002 Manual de usuario
VIA Technologies
VIA Technologies COMe-8X90 Manual de usuario
VIA Technologies
VIA Technologies CM30-SC Manual de usuario
VIA Technologies
VIA Technologies EPIA-P910 Manual de usuario
VIA Technologies
VIA Technologies EPIA-M830 Manual de usuario
VIA Technologies
VIA Technologies EPIA V-Series Manual de instrucciones
VIA Technologies
VIA Technologies EPIA-NX Manual de usuario
VIA Technologies
VIA Technologies EPIA-P900 Manual de usuario
VIA Technologies
VIA Technologies P4MA PRO Manual de usuario
VIA Technologies
VIA Technologies EPIA-EK10000G - VIA Motherboard - Mini ITX Manual de usuario
VIA Technologies
VIA Technologies EPIA-PX10000G - VIA Motherboard - Pico ITX Manual de usuario
VIA Technologies
VIA Technologies VT82C694X Pro Manual de usuario
VIA Technologies
VIA Technologies P4M266A Manual de usuario
VIA Technologies
VIA Technologies VAB-950 Guía de seguridad
VIA Technologies
VIA Technologies EPIA-SN Manual de usuario
VIA Technologies
VIA Technologies EPIA-NR Manual de usuario
VIA Technologies
VIA Technologies SOM-3000-STK Manual de usuario
VIA Technologies
VIA Technologies EPIA-CN10000EG - VIA Motherboard - Mini ITX Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
