VIA Technologies EPIA-SN Manual de usuario

User’s Manual

EPIA-SN

Version 1.22

September 25, 2008

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language, in any form or by any means, electronic, mechanical,

magnetic, optical, chemical, manual or otherwise without the prior written permission of VIA

Technologies, Incorporated.

Trademarks

All trademarks are the property of their respective holders. PS/2 is a registered trademark of

IBM Corporation.

Macrovision

Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; 6,516,132

licensed for limited viewing uses only. This product incorporates copyright protection

technology that is protected by certain U.S. patents and other intellectual property rights owned

by Macrovision and other rights owners. Use of this copyright protection technology must be

authorized by Macrovision, and is intended for home and other limited viewing uses only

unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Disclaimer

No license is granted, implied or otherwise, under any patent or patent rights of VIA

Technologies. VIA Technologies makes no warranties, implied or otherwise, in regard to this

document and to the products described in this document. The information provided in this

document is believed to be accurate and reliable as of the publication date of this document.

However, VIA Technologies assumes no responsibility for the use or misuse of the information

in this document and for any patent infringements that may arise from the use of this document.

The information and product specifications within this document are subject to change at any

time, without notice and without obligation to notify any person of such change.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class B digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case the user will be required to correct the interference at his personal

expense.

Notice 1

The changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the

emission limits.

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

Safety Instructions

1. Always read the safety instructions carefully.

2. Keep this User's Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence protects the equipment from

overheating. DO NOT COVER THE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V before connecting

the equipment to the power inlet.

7. Place the power cord in such a way that people cannot step on it. Do not place anything

over the power cord.

8. Always unplug the power cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening. Liquid can cause damage or electrical shock.

11. If any of the following situations arises, get the equipment checked by a service personnel:

•The power cord or plug is damaged

•Liquid has penetrated into the equipment

•The equipment has been exposed to moisture

•The equipment has not work well or you cannot get it work according to User's

Manual.

•The equipment has dropped and damaged

•If the equipment has obvious sign of breakage

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, OR

IN A STORAGE TEMPERATURE ABOVE 60

C (140

F). THE EQUIPMENT MAY BE

DAMAGED.

Caution:

Only use the appropriate battery specified for this product.

Do not reuse, recharge, or reheat an old battery.

Do not attempt to force open the battery.

Do not discard used batteries with regular trash.

Discard used batteries according to local regulations.

ONTENTS

One VIA Mini-ITX Mainboard

One ATA-133/100/ IDE Ribbon Cable

One Driver and Utilities CD

One IO Bracket

One Quick Installation Guide

ABLE OF

ONTENTS

Box Contents ..................................................................................... i

Table of Contents...............................................................................ii

Chapter 1 ......................................................................................... 1

Specifications................................................................................. 1

Mainboard Specifications ................................................................ 2

Mainboard Layout .......................................................................... 4

Back Panel Layout..........................................................................

Chapter 2 ......................................................................................... 7

Installation .................................................................................... 7

CPU............................................................................................... 8

Memory Module Installation ............................................................ 9

Connecting the Power Supply ........................................................10

Back Panel Ports ...........................................................................11

Connectors ...................................................................................13

Jumpers .......................................................................................21

Slots.............................................................................................25

Chapter 3 ........................................................................................27

BIOS Setup...................................................................................27

Entering Setup ..............................................................................28

Control Keys .................................................................................29

Navigating the BIOS Menus ...........................................................30

Getting Help .................................................................................32

Main Menu....................................................................................33

Main (System Overview)................................................................35

Advanced (Advanced Settings).......................................................3

CPU Configuration .........................................................................38

IDE Configuration .........................................................................39

Primary IDE Master / IDE Slave .....................................................41

Super IO Configuration..................................................................44

Hardware Health Configuration ......................................................45

ACPI Configuration........................................................................4

iii

General ACPI Configuration ...........................................................47

Advanced ACPI Configuration ........................................................48

Chipset ACPI Configuration ............................................................49

APM Configuration ........................................................................50

PCI Express Configuration .............................................................53

Remote Access Configuration.........................................................54

Trusted Computing........................................................................55

USB Configuration .........................................................................5

Advanced PCI/PnP Settings............................................................58

Boot Settings ................................................................................ 0

Boot Settings Configuration ........................................................... 1

Security Settings ........................................................................... 3

Advanced Chipset Settings.............................................................

North Bridge VIA CN89 Configuration ........................................... 7

AGP & P2P Bridge Configuration .................................................... 8

OnChip IGP/VGA Configuration ...................................................... 9

South Bridge VIA VT8251 Configuration .........................................71

Exit Options ..................................................................................73

Chapter 4 ........................................................................................77

Driver Installation .........................................................................77

Driver Utilities ...............................................................................78

CD Content ...................................................................................80

This page is intentionally left blank.

HAPTER

Specifications

The ultra-compact and highly integrated VIA EPIA-SN uses the Mini-

ITX mainboard form-factor developed by VIA Technologies, Inc. as

part of the company’s open industry-wide total connectivity initiative.

The mainboard comes with a VIA Processor, boasting of ultra-low

power consumption, cool and quiet operation.

Chapter 1

AINBOARD

PECIFICATIONS

CPU

•VIA C7

1.0GHz / 1.8GHz NanoBGA2 processor

Chipset

•VIA CN89 North Bridge

•VIA VT8251 South Bridge

Graphics

•Integrated VIA Chrome9™ HC Integrated Graphics with 2D/3D and

Video Acceleration

Audio

•VIA VT1708A High Definition Audio Codec

Me ory

•2 x DDR2 7/533 DIMM slot (up to 4 GB)

Expansion Slot

•1 x 1 -Lane PCI Express slot (Gen 1)

•1 x 32-bit Mini-PCI slot

IDE

•1 x UltraDMA 133/100/ IDE port

Serial ATA

•4 x S-ATA II connectors

LAN

•VIA VT 103L 10/100 Mbps Fast Ethernet Controller

•VIA VT 130 PCI Express Gigabit Ethernet Controller

Note:

System resources (such as BIOS, PCI, etc.) require physical memory

address locations that reduce available memory addresses above 3 GB.

This may result in less than 4 GB of memory being available to the

operating system and applications.

Tabla de contenidos

Otros manuales de Placa madre de VIA Technologies

VIA Technologies

VIA Technologies P4PA Manual de usuario

VIA Technologies

VIA Technologies EPIA M-Series Mini-ITX Manual de instrucciones

VIA Technologies

VIA Technologies EPIA-M Mini-ITX Manual de usuario

VIA Technologies

VIA Technologies EPIA-P900 Manual de usuario

VIA Technologies

VIA Technologies CM30-SC Manual de usuario

VIA Technologies

VIA Technologies VAB-1000 Manual de usuario

VIA Technologies

VIA Technologies EPIA-M720 Manual de usuario

VIA Technologies

VIA Technologies EPIA-M930 Manual de usuario

VIA Technologies

VIA Technologies EPIA-PE Manual de usuario

VIA Technologies

VIA Technologies EPIA-M840 Manual de usuario

VIA Technologies

VIA Technologies KM400 Manual de instrucciones

VIA Technologies

VIA Technologies Epia LT15000G Manual de usuario

VIA Technologies

VIA Technologies EPIA-P710 Manual de usuario

VIA Technologies

VIA Technologies EPIA SN-Series Manual de usuario

VIA Technologies

VIA Technologies P4X266-PE11-L Manual de usuario

VIA Technologies

VIA Technologies SOM-3000-STK Manual de usuario

VIA Technologies

VIA Technologies COMe-8X92 Manual de usuario

VIA Technologies

VIA Technologies NAB-7400 Manual de usuario

VIA Technologies

VIA Technologies VB8004 Manual de usuario

VIA Technologies

VIA Technologies EPIA-CN13000G - VIA Motherboard - Mini ITX Manual de usuario

VIA Technologies

VIA Technologies EPIA PD-Series Manual de usuario

VIA Technologies

VIA Technologies VAB-820 Manual de usuario

VIA Technologies

VIA Technologies EPIA ME6000 - VIA Motherboard - Mini ITX Manual de instrucciones

VIA Technologies

VIA Technologies P4M266A Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario